Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Mission: Organization (https://www.quiltingboard.com/mission-organization-f23/)
-   -   "Design wall" (https://www.quiltingboard.com/mission-organization-f23/design-wall-t181370.html)

Just Me... 04-13-2012 10:34 AM

1) cover a piece of poplar in batting or fleece and just lean it against the wall (I use the full sheet, which is the size of a piece of drywall) just used a staple gun to put the batting on OR

2) Use one of those vinyl tablecloths....they have the fuzzy stuff on the back. You can either leave it hanging on the wall, or roll it up in between sewing sessions. Voila!

sewNso 06-09-2012 06:29 PM

i used an 8 ft wooden dowel used for closet rods. hung it from the basement ceiling with a sheet strung on it. works fine in my basement. have to pin the blocks or quilt to it. see my DJ quilt done. ...

lots2do 06-19-2012 03:44 PM


Originally Posted by AnitaSt (Post 5027803)
My design wall is a heavy weight flannel sheet (from the Vermont Country Store catalog...a little pricey but more heavyweight than I could find elsewhere) hanging on clip rings from a decorative curtain rod. I can pin blocks to it if they don't have enough cling or get too big. I also use it to hang up a finished quilt to take pictures. And just for display sometimes. I love seeing blocks on the wall.

If you go the curtain rod route, a couple of words of advice:

Get double the number of clip rings and space them closer together than you would for a curtain. Provides more support and the flannel sheet won't ripple as much.

My flannel sheet rippled more than I wanted so I sewed a 4-inch wide band of curtain header (the polyester type, not the heavier buckram) to the top. That eliminated the ripples.

Anita

Anita,
I've been thinking of doing this too. Did you use the two hangers that come with the curtain rod to hang your design wall? If you did, did the design wall hang out from the wall? I wasn't sure how to tackle this.
Thanks,
lots2do

Country1 06-19-2012 04:01 PM

Table cloth, that's my vote to. If it doesn't work, try something else. It will also let you see for sure where you want your wall, before you put up something more permanet.

vickiehornback 06-22-2012 05:51 PM

I got a 4 x 8 insulated wall board( not sure exactly what it's called ) at Lowe's .. I think it's for putting under vinyl siding. There is different thicknesses, I got the 2 inch, then I covered it with headliner. It's the stuff that is used for the ceiling inside your car. I got this at Hancock Fabrics in Louisville,KY I'm sure other fabric stores have this. It works better than felt or fleece, I love it

Margo in Maine 06-22-2012 10:28 PM

This is wonderful...neat idea

LadyLuck 04-06-2013 06:00 AM

I use an outdoor table cloth for my picnic table, flannel side out of course. Use Velcro to hang on wall.

BrendaY 04-08-2013 09:43 PM


Originally Posted by nstitchs (Post 5129529)
I used hollow core doors and sprayed them with adhesive and covered them with flannel and hinged them together. They work awesome and fold up when not in use.

Now this is what I call a brilliant idea!! Thanks for the pictures too...

Nammie to 7 04-09-2013 10:37 AM

Great ideas - at my house it is called a climbing wall - my cats love to climb the wall and sleep on the top while I'm sewing

susanwilley 04-13-2013 03:44 AM

My husband bought me 2 large sheets of wall insulation. I taped them together and it doubles as my design wall and I use it to spray baste my quilt layers. It works great. Large enough to hang a king size quilt for spray basting. It leans against the wall behind my cutting table ready to use whenever I need it. I love it!


All times are GMT -8. The time now is 03:23 AM.