Those Who Sew in the Kitchen
#1
Those Who Sew in the Kitchen
As I am a person who almost always has her sewing machine set up in the kitchen, I came up with an idea. Has anyone ever considered having a real space cut out of your kitchen counter for your sewing machine? One that a person would be able to lower the machine when done sewing. Sort of like an old-fashioned sewing cabinet.
I just think it would be the niftiest thing! Of course, one would have to be willing to give up that much cupboard space.
I just think it would be the niftiest thing! Of course, one would have to be willing to give up that much cupboard space.
#2
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
I don't sew in the kitchen, though I used to sew in the laundry room. When I was renovating, I did build the sewing machine into the cupboards.
It wasn't done, like the old machines where the machine turned on it's side into the cabinet. Rather we cut a hole in the countertop, inserted the machine, left it standing. Then had a clip up/down lid with a skirt on it, so that when it was closed, the machine was fully enclosed and the countertop looked consistent with the rest of the laundry countertop, except for the cuts in the arborite.
For my "chair" we built a cube with shepherd's casters that fully fit the hole where your legs go, so that when not sewing, it was out of the way. The top was padded so it'd be nice and cushy, then it flipped up for storage of sewing needs. There was a lift out tray so it was double decker, rather than one deep hole. There's lots of improvements that I'd do if doing it again.
In one of the drawers in the laundry cabinets, there was a flip out ironing board. It wasn't a very big laundry room and this all worked out well.
Limitations ... if you siwtch machines, the hole wouldn't likely fit, though you could easily renovate for the new machine! Space wise I was limited because of the built in. In other locations, one would be able to have an open end, to allow the fabric to drape down an open side (*think* fully assembling a quilt)
So yes, you have the starts of a fantastic plan ... take your time to plan it out and you'll be more than happy with your results!
It wasn't done, like the old machines where the machine turned on it's side into the cabinet. Rather we cut a hole in the countertop, inserted the machine, left it standing. Then had a clip up/down lid with a skirt on it, so that when it was closed, the machine was fully enclosed and the countertop looked consistent with the rest of the laundry countertop, except for the cuts in the arborite.
For my "chair" we built a cube with shepherd's casters that fully fit the hole where your legs go, so that when not sewing, it was out of the way. The top was padded so it'd be nice and cushy, then it flipped up for storage of sewing needs. There was a lift out tray so it was double decker, rather than one deep hole. There's lots of improvements that I'd do if doing it again.
In one of the drawers in the laundry cabinets, there was a flip out ironing board. It wasn't a very big laundry room and this all worked out well.
Limitations ... if you siwtch machines, the hole wouldn't likely fit, though you could easily renovate for the new machine! Space wise I was limited because of the built in. In other locations, one would be able to have an open end, to allow the fabric to drape down an open side (*think* fully assembling a quilt)
So yes, you have the starts of a fantastic plan ... take your time to plan it out and you'll be more than happy with your results!
#3
We had plans to do something similar, but then our carpenter friend moved
it's a GREAT idea! IT is a good point about the limitations, but cutting the space a little wider and deeper should resolve that issue. For me, I've used the same machines for years and just keep 'em well maintained.
it's a GREAT idea! IT is a good point about the limitations, but cutting the space a little wider and deeper should resolve that issue. For me, I've used the same machines for years and just keep 'em well maintained.
#4
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
We had plans to do something similar, but then our carpenter friend moved
it's a GREAT idea! IT is a good point about the limitations, but cutting the space a little wider and deeper should resolve that issue. For me, I've used the same machines for years and just keep 'em well maintained.
it's a GREAT idea! IT is a good point about the limitations, but cutting the space a little wider and deeper should resolve that issue. For me, I've used the same machines for years and just keep 'em well maintained.
#7
Power Poster
Join Date: Aug 2011
Location: Charleston SC
Posts: 10,742
I sew in my dining room. My table has my machine on one end which is there all the time. I try to hide it when I have company. That is not always fun or easy to do....A special place in the kitchen with a way of hiding it when done sounds like a great idea........Good luck...
#8
I will probably never do this but was wondering what others thought. Never did think of sewing larger items - that would be difficult and would obviously have to move the machine.
For some reason, my sewing machine seems to 'float' around - kitchen table, kitchen counter, kitchen island, dining room table. It's always up - you would think I would get tons of projects done. I do get lots of small projects done but don't seem to take the time to cut/sew/finish the probably four quilts I have to do.
Someday I think I really would like to make the dining room into a permanent sewing room. Heck, it's only used for sure once a year, sometimes twice.
For some reason, my sewing machine seems to 'float' around - kitchen table, kitchen counter, kitchen island, dining room table. It's always up - you would think I would get tons of projects done. I do get lots of small projects done but don't seem to take the time to cut/sew/finish the probably four quilts I have to do.
Someday I think I really would like to make the dining room into a permanent sewing room. Heck, it's only used for sure once a year, sometimes twice.
#9
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
If that's what you want to do, why wait? Make plans to use it as your sewing room ... and include in those plans how you make it back into the dining room for the occasions you want to have the full dining room. It really wouldn't be that difficult to accomplish ......... if you really want it!
#10
Senior Member
Join Date: Mar 2012
Location: Englewood, CO
Posts: 531
I did this in my last house. I put my dining room in the formal living room and put my sewing in my dining room. It was a wonderful solution. Yes it was exposed. But, if you're in my home, hopefully it is because you are my friend and love me. Not judging my creative space. jmho
Thread
Thread Starter
Forum
Replies
Last Post
Scrappy Gram
General Chit-Chat (non-quilting talk)
64
02-11-2014 07:22 AM
carolaug
General Chit-Chat (non-quilting talk)
29
10-31-2013 01:13 PM
craftybear
General Chit-Chat (non-quilting talk)
8
06-20-2010 04:27 PM