Go Back  Quiltingboard Forums > Pictures
My new OLD SINGER >

My new OLD SINGER

My new OLD SINGER

Old 04-21-2010, 02:38 PM
  #1  
Super Member
Thread Starter
 
Join Date: Jun 2009
Location: Michigan
Posts: 2,146
Default

Well after a trip to my DH's uncles house a couple weekends ago I finally am posting pic's of my present. A old singer that belonged to DH's grandma. I am hoping to get it cleaned up, fixed, and in working condition so that I can use it. The cabinet also needs repair and I need to learn how to work it so any input that any of you have would be great, Thanx
Star
Attached Thumbnails attachment-43952.jpe   attachment-45313.jpe   attachment-45314.jpe   attachment-45315.jpe   attachment-45316.jpe  

attachment-45317.jpe  
STAR is offline  
Old 04-21-2010, 02:43 PM
  #2  
Super Member
 
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
Default

Lostn51 will know all there is to know about it. If he doesn't see the thread, you might want to PM him
Lisa_wanna_b_quilter is offline  
Old 04-21-2010, 02:59 PM
  #3  
Moderator
 
Join Date: Mar 2008
Location: North East Lower peninsula of Michigan
Posts: 6,230
Default

I just got my treadle up and going. so much fun but a work out for the legs! Once you get the rhythm down you are good to go. Mine sews so nice!
Up North is offline  
Old 04-21-2010, 03:04 PM
  #4  
Power Poster
 
ann clare's Avatar
 
Join Date: Apr 2010
Location: Navan. Co. Meath. Ireland
Posts: 15,110
Default

Lucky you. What are you calling her?
ann clare is offline  
Old 04-21-2010, 03:11 PM
  #5  
Super Member
 
Charlee's Avatar
 
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Default

A "Redeye"! :) How wonderful to have an heirloom like that!!
Looks to me like your belt needs to be tightened...easy enough, undo the "clamp" (wire), snip off what you feel you need to, (about an inch, maybe?) and use an awl to poke a hole in the end you cut, and reattach the clamp.

Go here: http://needlebar.org/main~nb/ and look for a manual...it's going to be either a Model 66 or Model 99... (I'm not up enough yet to be able to tell you which it is!) but the manual will tell you where all of the points are that need to be oiled. Clean any lint/dust/etc., oil it up, shorten that belt and go to town!

There's only a small "learning curve" to using a treadle. You're going to love it! Congrats on your acquisition of a wonderful heirloom to take care of... (I don't believe that "we" own these things personally, but are instead caretakers for the family! :) )
Charlee is offline  
Old 04-21-2010, 03:57 PM
  #6  
Super Member
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

You have a great machine here and it will sew great. I have my grandma's. The foot attaches to the back can be a problem if you do not have the attachnments but I see you have them in a drawer. If you have a manual thats even better. You can clean it youself. In the oil holes and everywhere you oil underneath the bed etc., use karosene in large amounts and run the machine without thread or bobbin very fast. Then wipe off the mess. you may have to this several times and when when it pedals easy and smooth, oil it well. If it works it should be fine. Practice pedal with no thread or bobbin until you feel comfortable. Go to thesewingmachineshop.com or treadleandvintagesingermodels. You can order manuals and parts. I have used mine for years and would not trade a new machine for it. She is a beauty. Glenn :-D
Glenn is offline  
Old 04-21-2010, 04:49 PM
  #7  
Banned
 
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Default

Here I is...............nice Heirloom indeed!!

From what I can see from the few photos you have a model 66 (the only one that had the "Red Eye" decals) and since it is a backclamp machine it is either a 66-1 or 66-3 depending on the serial. Which reminds me what is the serial number anyway? Its located in front of the pillar and is stamped on a boss on the bed of the machine.

I have a 66-1 and I love mine!!

As far as the cleaning of it take the bobbin and the needle plates off , the faceplate and the rear inspection plate off. then you can take Kerosene and thoroughly wash the mechanics with the kerosene with a 3/4" or 1" paint brush.

Try not to get to much on the finish of the machine, even though the decals are worn a lot we do not need to soften the japan on the machine. To clean the exterior of the machine you want to use a NON PUMICE hand cleaner (like Go-Jo)with cotton balls and Q-Tips working in small areas and wiping off with paper towels after you move to the next spot. After you clean the machine (it will be a HUGE difference) then use a polish and go over the machines finish. I use "Scotts Liquid Gold" in the pour bottle and it gives it a wet look and will protect the finish and decals.

Be sure to oil everything that metal touches metal and I will include a direct link to a PDF format owners manual for your machine so you can see the thread path and all of the oiling points.

Oh and if you want to polish the parts that are nickle plated use either SemiChrome or Mothers Mag Wheel Polish.

Enjoy your new old machine!!!!

Billy

Here is your link:

http://www.singerco.com/accessories/manuals.html

Just click the second one from the top and its a free download.
Lostn51 is offline  
Old 04-21-2010, 04:53 PM
  #8  
Banned
 
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Default

Oh something that I forgot to tell you......

Use sewing machine oil on the treadle at all of the pivot points including the pitman arm. You will notice it runs smoother and it will not squeak nearly as much.

Billy
Lostn51 is offline  
Old 04-21-2010, 05:16 PM
  #9  
Power Poster
 
erstan947's Avatar
 
Join Date: Feb 2010
Location: Louisiana
Posts: 12,166
Default

I'm green with envy!
erstan947 is offline  
Old 04-21-2010, 05:18 PM
  #10  
Super Member
 
Join Date: Oct 2009
Location: South Carolina
Posts: 3,155
Default

She's lovely. Glad you are able to give her a good home.
sewgull is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
icentropy
For Vintage & Antique Machine Enthusiasts
20
04-03-2014 08:13 PM
miriam
For Vintage & Antique Machine Enthusiasts
154
03-12-2014 07:43 AM
Buzzy Bee
For Vintage & Antique Machine Enthusiasts
2
07-21-2011 02:09 PM
DianaSwi
Main
4
02-15-2011 02:24 PM
acesgame
For Vintage & Antique Machine Enthusiasts
8
08-01-2010 06:14 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter