Quiltingboard Forums - Leam length help

Quiltingboard Forums (https://www.quiltingboard.com/)

- Pictures (https://www.quiltingboard.com/pictures-f5/)

- - Leam length help (https://www.quiltingboard.com/pictures-f5/leam-length-help-t152847.html)

Quote:

Originally Posted by grammy17

Quote:

Originally Posted by paulswalia

Quote:

Originally Posted by mathteacher

I wonder if your edges don't match because of the natural push of the presser foot on the top fabric. If you pin at small intervals, that should help.

That's what I was wondering. If you have one piece a little bigger than another, always put the bigger one on the bottom and the feed dogs help you to ease them together. So maybe this is because you have too much pressure on the presser foot and it's pushing the top through faster than the bottom.

Well...not exactly perfect. Lowering the pressure was not the fix.
Problem was in the cutting. Took all the stitching out and restitched using the 1/4" foot, medium pressure and putting the larger block on the bottom. Got it done--again. It fits.

Now when I join these block to the nex ones there will be a lot of breath holding.
THANK YOU!

I lessened the pressure and it is perfect!!!!!!

Quote:

Originally Posted by paulswalia

Quote:

Originally Posted by mathteacher

I wonder if your edges don't match because of the natural push of the presser foot on the top fabric. If you pin at small intervals, that should help.

This is the case so...in joining the next four together, I'm beginiing at the center point and working toward the edge with the larger block on the bottom. Still getting a small amount to trim. You can see it on the yellow.