Originally Posted by lee231
phyllis nm
Looking at your pics of the bobbin winder, I believe all the parts are there. I think the parts are assembled wrong, the part that pops when the bobbin is full is under where the bobbin is mounted, it needs to be above the bobbin. HTH's
edit, I think the two parts need to be switch around, bobbin wheel (tire) on the bottom screw and shoe on the top screw.
I loosen the bottom screw and swung the “hook” on top of where I think it should be, it is on top of the black part of the Japan part of the wheel. But it will not release, won’t move at all. I can not switch the top and bottom screws, the bottom screw hole has a small hole that the spring fits in. I took the whole thing off, and tried different set ups. The way it is now I will have to leave the top screw loose to engage to the hand wheel to wing the bobbin. Something is still off.
before
[ATTACH=CONFIG]210260[/ATTACH]
after switching to no move placement
[ATTACH=CONFIG]210261[/ATTACH]