Originally Posted by
ArchaicArcane
Sometimes the issue with the stitch width selector is at the needlebar side of things. At the top of the needlebar with the "door" open, if you push it to the right, it should move about 1/4" to the right, then move back when you release it. If this is gummed up, like the 401A I worked on, it will cause issues at the other end as well. TriFlow is your best friend as usual.
yeah what I tried to say - the other end too - if you do one do them both - some kinds of dried up goo take solvent - most often T-F will do the job
I got that machine sewing but it seems like it is still a little slow - I'm running out of goo to un-goo