I will never miter corners again!
#31
A couple weeks ago I posted my easy mitered border method. I had hated doing miters for just the reasons you've stated but decided there had to be a way and a way to match stripes at corners. This was my fist posting:
http://www.quiltingboard.com/t-159462-1.htm
http://www.quiltingboard.com/t-159494-1.htm
http://www.quiltingboard.com/t-159715-1.htm
Once I determined the method, I find that I can miter corners just as quickly and definitely with effective results ever single time. It always works. Give it a try and let me know what you think.
http://www.quiltingboard.com/t-159462-1.htm
http://www.quiltingboard.com/t-159494-1.htm
http://www.quiltingboard.com/t-159715-1.htm
Once I determined the method, I find that I can miter corners just as quickly and definitely with effective results ever single time. It always works. Give it a try and let me know what you think.
#32
A couple weeks ago I posted my easy mitered border method. I had hated doing miters for just the reasons you've stated but decided there had to be a way and a way to match stripes at corners. This was my postings:
http://www.quiltingboard.com/t-159462-1.htm
http://www.quiltingboard.com/t-159494-1.htm
http://www.quiltingboard.com/t-159715-1.htm
Once I determined the method, I find that I can miter corners just as quickly and definitely with effective results ever single time. It always works. Give it a try and let me know what you think.
http://www.quiltingboard.com/t-159462-1.htm
http://www.quiltingboard.com/t-159494-1.htm
http://www.quiltingboard.com/t-159715-1.htm
Once I determined the method, I find that I can miter corners just as quickly and definitely with effective results ever single time. It always works. Give it a try and let me know what you think.
#33
Super Member
Join Date: Jun 2010
Location: Bay Area near San Francisco
Posts: 1,213
Originally Posted by irishrose
I sat at the sewing machine with a Fons & Porter quilting book open on my lap when I did my first good mitered binding last winter. Now they are easy.
Mitered corners in the sashing may be a different problem. I've done one, but it was a print - now I have a piano key border that will have to mitered. Yikes!
Mitered corners in the sashing may be a different problem. I've done one, but it was a print - now I have a piano key border that will have to mitered. Yikes!
#34
Banned
Join Date: Aug 2010
Posts: 2,047
Originally Posted by almostfree
I am trying to make this cute "easy" table runner for fall, but these corners are a mess! I am almost in tears! I should have just put binding on it and forgotten the mitered border. Any pointers on mitering corners? :cry:
How to Make Mitered Corners
[ATTACH=CONFIG]276341[/ATTACH]
#36
Member
Join Date: Oct 2010
Posts: 27
Mitered binding or corners? Both are not hard to do, accuracy important.
Mitered corners are falling-off-a-log easy. There is no cutting, measuring or fussing until you have your miter sewn. I have a tutorial (very basic) on my outdated blog. All you need is a 1/4" mark on both directions, an iron and a couple of pins. Look to see if you can figure it out - if not, e-mail me and I'll walk you thru it! It really is easy!!
http://irishlakequilter.blogspot.com...d-corners.html
Mitered corners are falling-off-a-log easy. There is no cutting, measuring or fussing until you have your miter sewn. I have a tutorial (very basic) on my outdated blog. All you need is a 1/4" mark on both directions, an iron and a couple of pins. Look to see if you can figure it out - if not, e-mail me and I'll walk you thru it! It really is easy!!
http://irishlakequilter.blogspot.com...d-corners.html
#37
Originally Posted by qwltnfool
Mitered binding or corners? Both are not hard to do, accuracy important.
Mitered corners are falling-off-a-log easy. There is no cutting, measuring or fussing until you have your miter sewn. I have a tutorial (very basic) on my outdated blog. All you need is a 1/4" mark on both directions, an iron and a couple of pins. Look to see if you can figure it out - if not, e-mail me and I'll walk you thru it! It really is easy!!
http://irishlakequilter.blogspot.com...d-corners.html
Mitered corners are falling-off-a-log easy. There is no cutting, measuring or fussing until you have your miter sewn. I have a tutorial (very basic) on my outdated blog. All you need is a 1/4" mark on both directions, an iron and a couple of pins. Look to see if you can figure it out - if not, e-mail me and I'll walk you thru it! It really is easy!!
http://irishlakequilter.blogspot.com...d-corners.html
#38
I watched a "sewing with nancy" this past sat. (on PBS) and she had this really nifty little piece of plastic you lay on a corner of your fabric and it helps you make the most perfect (really, perfect!) mitred corner you ever saw! It can be used to make a really thin edge to one as deep as a a satin edge on a wool blanket.
I cannot remember the name :-( , but if you look up her sewing catalog I'm sure she sells it. ) sharet
I cannot remember the name :-( , but if you look up her sewing catalog I'm sure she sells it. ) sharet
#39
Member
Join Date: May 2011
Location: concord nc
Posts: 27
I found an easy way to make miter corners banding and really helped me understand and take the fear out for me. I will try to find the instructions or draw it out but do not know how to add it to this forum. you can send me a pm.
www.sew4home.com
look for bedding pillow sham. it is a pathwork with white flange. it is very good at understanding miters, flanges etc.
www.sew4home.com
look for bedding pillow sham. it is a pathwork with white flange. it is very good at understanding miters, flanges etc.
#40
Junior Member
Join Date: Dec 2010
Location: Longview, Tx
Posts: 153
I don't know if I can explain this well enough for anyone to understand but here is how I do my corners. after you have sewn the first edge of the border on I press then turn over then stitch almost to a corner -pull the binding at the corner straight in then fold over the stitched side then the other side and the it looks like a mitered corner-the sew around till you get to the next corner and repeat.
Heck--I don't know if I could follow those instructions or not. Sorry.
Heck--I don't know if I could follow those instructions or not. Sorry.
Thread
Thread Starter
Forum
Replies
Last Post
xraytechluvs2quilt
Main
6
01-02-2011 12:37 AM