Go Back  Quiltingboard Forums >
  • Main
  • Starch/Sizing - >
  • Starch/Sizing -

  • Starch/Sizing -

    Old 10-20-2012, 08:56 AM
      #1  
    Power Poster
    Thread Starter
     
    Join Date: May 2008
    Location: MN
    Posts: 24,474
    Default Starch/Sizing -

    For most projects, I avoid using it.

    The one or two times I did, my pieces stretched a lot!

    Is there a trick to 'using it properly'?

    I've come to the conclusion that soaking the fabric, and trying to iron/press it dry is NOT the right way to do it.
    bearisgray is offline  
    Old 10-20-2012, 08:58 AM
      #2  
    Senior Member
     
    Join Date: Mar 2012
    Location: Harrisburg, OR
    Posts: 443
    Default

    I used spray heavy duty starch for my current quilt and it's been a life saver. My pieces are 1.5" squares and it keeps them nice even. I just spray it on and then iron away. I'm using bounce sorry for my current quilt nd like it too.
    misskira is offline  
    Old 10-20-2012, 09:10 AM
      #3  
    Super Member
     
    Join Date: Sep 2010
    Location: Live Oak, Texas
    Posts: 6,133
    Default

    I don't know how others do it but I never try to press it when it is very wet. I roll mine up in up in something and get a lot of the water out then press it on the ironing board with my hands and smooth it as much as I can then lift my iron up and down to press never moving the iron on the fabric as that will stretch it. I hope this helps you.
    crafty pat is offline  
    Old 10-20-2012, 09:28 AM
      #4  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,458
    Default

    I starch, let it soak overnight in a plastic bag in the refrigerator.
    Next day, if it's yardage, I spin it and half dry in the dryer. Then it's easy to iron.
    For fat quarters and anything smaller, I put them between layers of towels and
    let it absorb most of the water. You want the fabric slightly damp but definitely
    not soaking wet. Then I put a big old towel on my ironing board, and cover
    the fabric with a piece of muslin and press. When it's 99% dry I remove
    the muslin and continue pressing. There might be a slight distortion but that
    doesn't bother me. At least the fabric doesn't fray or stretch while I'm sewing.

    Last edited by EasyPeezy; 10-20-2012 at 09:30 AM.
    EasyPeezy is offline  
    Old 10-20-2012, 09:50 AM
      #5  
    Super Member
     
    Scissor Queen's Avatar
     
    Join Date: Jul 2009
    Location: Southwest Kansas
    Posts: 4,820
    Default

    I use Best Press and spray and iron the fabric before I cut it. I don't use enough to get the fabric wet. Then I don't use it at all after that.
    Scissor Queen is offline  
    Old 10-20-2012, 10:03 AM
      #6  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,481
    Default

    ​I just spritz and iron my fabric. If I needed a fabric really stiff for appliqué or embroidery, I think I'd just use stabilizer.
    Tartan is offline  
    Old 10-20-2012, 10:14 AM
      #7  
    Super Member
     
    JudyTheSewer's Avatar
     
    Join Date: Aug 2011
    Location: Sparks, NV
    Posts: 1,243
    Default

    I soak a piece of fabric in a mixture of 50% blue liquid starch and 50% water. I squish out as much moisture as I can; I never wring it though. I hang it somewhere to dry (usually my pieces are 20" X 20" or less so I hang them over the edge of my ironing board) and put something to absorb the drips underneath. When it is totally dry I iron with the grain of the selvage. I don't notice any stretching or distortions of the fabric. Trying to iron the fabric dry when the fabric is wet has not worked for me - the starch scorches.
    JudyTheSewer is offline  
    Old 10-20-2012, 11:32 AM
      #8  
    Super Member
     
    GrannieAnnie's Avatar
     
    Join Date: Aug 2010
    Location: S. W. Indiana
    Posts: 7,484
    Default

    Originally Posted by bearisgray
    For most projects, I avoid using it.

    The one or two times I did, my pieces stretched a lot!

    Is there a trick to 'using it properly'?

    I've come to the conclusion that soaking the fabric, and trying to iron/press it dry is NOT the right way to do it.

    I use half way heavy Sta-Flo and it makes piecing---------actually any sewing--------so much easier.
    GrannieAnnie is offline  
    Old 10-20-2012, 11:33 AM
      #9  
    Super Member
     
    GrannieAnnie's Avatar
     
    Join Date: Aug 2010
    Location: S. W. Indiana
    Posts: 7,484
    Default

    Originally Posted by JudyTheSewer
    I soak a piece of fabric in a mixture of 50% blue liquid starch and 50% water. I squish out as much moisture as I can; I never wring it though. I hang it somewhere to dry (usually my pieces are 20" X 20" or less so I hang them over the edge of my ironing board) and put something to absorb the drips underneath. When it is totally dry I iron with the grain of the selvage. I don't notice any stretching or distortions of the fabric. Trying to iron the fabric dry when the fabric is wet has not worked for me - the starch scorches.

    I just spray----------don't wet the fabric, just dampen.
    GrannieAnnie is offline  
    Old 10-20-2012, 11:56 AM
      #10  
    Super Member
     
    Join Date: Apr 2010
    Location: Illinois
    Posts: 9,312
    Default

    Originally Posted by JudyTheSewer
    I soak a piece of fabric in a mixture of 50% blue liquid starch and 50% water. I squish out as much moisture as I can; I never wring it though. I hang it somewhere to dry (usually my pieces are 20" X 20" or less so I hang them over the edge of my ironing board) and put something to absorb the drips underneath. When it is totally dry I iron with the grain of the selvage. I don't notice any stretching or distortions of the fabric. Trying to iron the fabric dry when the fabric is wet has not worked for me - the starch scorches.
    I use this method as well. Soak , air dry, then iron. Best advice ... let the starch dry prior to pressing/ironing. Depending on the project ..I will alter the strenght of the starch . Currently work ing a log cabin with skinny strips..some one inch. Other than paper piecing , this( starch) is the best method for accuracy.
    I especially like to starch scrappy projects as the grain ( lenght or cross) is not quickly determined on bits of scraps. starching keeps them all behaving and playing well together.
    Lori S is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    QUILTNUT
    Main
    3
    01-11-2011 12:19 AM
    lorli
    Main
    8
    01-03-2010 01:43 PM
    diogirl
    Main
    14
    11-02-2009 06:36 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter