Go Back  Quiltingboard Forums >
  • Main
  • A very easy way to make ruffles..... >
  • A very easy way to make ruffles.....

  • A very easy way to make ruffles.....

    Old 10-31-2012, 07:12 AM
      #1  
    Senior Member
    Thread Starter
     
    kellen46's Avatar
     
    Join Date: Aug 2010
    Posts: 811
    Lightbulb A very easy way to make ruffles.....

    I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed. I recently needed to add ruffles to a curved hem on aprons, this worked great. I just pinned at the center and ends of the seam and adjusted the ruffles as I pinned along the perimeter. Of course this is basically a basting stitch so you do need to over sew the gathers with a regular stitch length and tension. I have a ruffling-foot and a gathering foot but I found this a very easy solution to how to get the gathers to fit in the seam you are trying to match it with. If anyone has a link to the You Tube video on the gathering technique please post it so they can get credit for this idea.
    Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.
    kellen46 is offline  
    Old 10-31-2012, 07:18 AM
      #2  
    Super Member
     
    Join Date: Apr 2011
    Location: Bosque County, Texas
    Posts: 2,709
    Default

    Check your instructions on your serger. My serger will make ruffles. That would have been the easiest of all.
    TanyaL is offline  
    Old 10-31-2012, 08:05 AM
      #3  
    Super Member
     
    GrannieAnnie's Avatar
     
    Join Date: Aug 2010
    Location: S. W. Indiana
    Posts: 7,484
    Default

    Originally Posted by kellen46
    I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed. I recently needed to add ruffles to a curved hem on aprons, this worked great. I just pinned at the center and ends of the seam and adjusted the ruffles as I pinned along the perimeter. Of course this is basically a basting stitch so you do need to over sew the gathers with a regular stitch length and tension. I have a ruffling-foot and a gathering foot but I found this a very easy solution to how to get the gathers to fit in the seam you are trying to match it with. If anyone has a link to the You Tube video on the gathering technique please post it so they can get credit for this idea.
    Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.

    I don't change my tension but that is the way I've made ruffles the 60 +/- years I've been sewing.
    GrannieAnnie is offline  
    Old 10-31-2012, 08:15 AM
      #4  
    Super Member
     
    Join Date: Mar 2012
    Location: Texas, USA
    Posts: 5,896
    Default

    I was taught to do two rows of basting (similar to this method), for gathering. Pin each end, to seam line. Then fold to center of ruffle, matching center of seam line. Pin. Then fold to center of each piece, between pins. Match and pin. Depending upon the expanse to be sewn, this may be done several more times, before adjusting ruffles and sewing together. Been sewing over 50 years.
    Neesie is offline  
    Old 10-31-2012, 08:16 AM
      #5  
    Super Member
     
    Join Date: Jan 2011
    Posts: 6,006
    Default

    When my kids were little and I sewed a lot of clothes that was the way I made ruffles!
    Grandma Bonnie is offline  
    Old 10-31-2012, 08:45 AM
      #6  
    Super Member
     
    Join Date: Nov 2010
    Location: Cadillac, MI
    Posts: 6,487
    Default

    I second the two rows of stitching. I have done this nearly 60 years. I've even used three rows on very full garments. I would never use a single row on anything.
    irishrose is offline  
    Old 10-31-2012, 09:37 AM
      #7  
    Junior Member
     
    Join Date: Oct 2010
    Posts: 255
    Default

    Ditto everything Neesie said. I also still use many of those techniques we had to master in junior high home-ec class to get a decent grade.
    peacebypiece is offline  
    Old 10-31-2012, 11:50 AM
      #8  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,232
    Default

    I'm with Neesie. I was taught this way of making ruffles and that is the only way I would do it. One thread only
    is likely to break then you have to start over. I never adjusted the tension, just used the longest stitch the machine had. I have been sewing 52 years. Some tips are good and sometimes the old ways work better.
    Jingle is offline  
    Old 10-31-2012, 01:06 PM
      #9  
    Super Member
     
    LivelyLady's Avatar
     
    Join Date: Dec 2010
    Location: Western MA
    Posts: 2,720
    Default

    Originally Posted by TanyaL
    Check your instructions on your serger. My serger will make ruffles. That would have been the easiest of all.
    That's how I make my ruffles, too.
    LivelyLady is offline  
    Old 10-31-2012, 01:55 PM
      #10  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,361
    Default

    The way I have used recently is to zig zag over a thick piece of thread (some recommend dental floss) without catching it and then gather to desired length and when done sewing, pull out the thick thread/floss.
    Stitchnripper is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    carolaug
    Links and Resources
    32
    03-02-2011 05:26 AM
    Airwick156
    Pictures
    23
    01-27-2011 08:50 AM
    Sue Fish
    General Chit-Chat (non-quilting talk)
    18
    12-20-2010 03:25 PM
    calicocat
    Main
    20
    05-09-2010 10:09 PM
    sondray
    Links and Resources
    0
    01-24-2009 05:53 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter