Go Back  Quiltingboard Forums >
  • Main
  • Can't get started! >
  • Can't get started!

  • Can't get started!

    Old 01-16-2013, 08:09 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Nov 2012
    Location: Western Australia
    Posts: 9
    Default Can't get started!

    Anyone else really dislike cutting? I have so many ideas I want to try but my cutting is always so bad it puts me off! I bought a bunch of jelly rolls to try scrappy bargello, where you sew them all together in a tube and then cut them into 2.5 inch strips, but I am terrified of ruining an entire jelly roll with my awful cutting! I love sewing binding on by hand-anyone want to swap skills Haha!
    Fiona O'S is offline  
    Old 01-16-2013, 08:20 AM
      #2  
    Super Member
     
    Join Date: Jan 2012
    Location: The Colony, TX
    Posts: 3,364
    Default

    Too bad you aren't closer - I love cuting. What makes your cutting so bad - does your ruler slip? If so there are a couple of tricks, if you can keep your pinkie finger off the ruler but right next to it, it will keep your ruler from slipping to the left and don't forget the walking your hand up your ruler as you are cutting.

    The other thing I found (I use it mostly for odd shaped templates) is TrueCut Non-Slip Adhesive Rings that you can put on the back of your ruler to keep it from slipping. These are the best that I have found - I am not associated with them but love them.
    quiltstringz is offline  
    Old 01-16-2013, 08:22 AM
      #3  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    HI, I would see if you can take a beginning quilting class. One of the first skills they teach will be accurate cutting. How to keep your ruler from slipping, walking your hand up as you cut etc. Well worth the price of the class. Also, there are lots of cutting aids out there. The ones that come to mind are the June Tailor shape cutter rulers. It's a large piece of thick plastic with slots at intervals. Your cutter rides in the slots and helps you make a straight cut. I'm pretty sure you can get them there.
    PaperPrincess is offline  
    Old 01-16-2013, 08:40 AM
      #4  
    Member
    Thread Starter
     
    Join Date: Nov 2012
    Location: Western Australia
    Posts: 9
    Default

    The sad thing is that I have already done the beginner's course! I am okay cutting small pieces like a fat quarter, but if I try to strip cut a WOF fabric they always seem to be buckled and I don't really know why as I use all the sensible techniques I was taught about walking your hand up etc. I am always astounded when I watch tutorials and the tutor casually zips their rotary cutter over a huge length and stack of fabric and comes out with perfect pieces! For me the whole process is painfully slow and disappointing! I think I will investigate these cutting aids and non slip products as I suspect part of the problem is that I don't notice the tiny movement in the ruler.
    Fiona O'S is offline  
    Old 01-16-2013, 08:47 AM
      #5  
    Super Member
     
    Join Date: Jun 2010
    Location: England Alton Towers
    Posts: 6,673
    Default

    Do you have a close friend, husband partner teenage son who could help. If not accuquilt could help but expensive. Other way is to buy ready cut kits.
    DOTTYMO is offline  
    Old 01-16-2013, 08:56 AM
      #6  
    Super Member
     
    mike'sgirl's Avatar
     
    Join Date: May 2012
    Location: starke,Florida
    Posts: 2,025
    Default

    Is your fabric folded correctly? If your strips are buckled, try watching Leah Day's Youtube tute on folding fabric. She helped me get straight strips. The only thing that I do different, is after I get the first fold, I carefully press a crease and then fold it again, making sure that I have it hanging straight. If you watch her this will make sense. I also put little sandpaper dots on the back of my rulers to keep them from sliding. I don't know about the other product that quiltstringz suggested, but I'm sure it is close to the same thing.
    I also have a Shape cut ruler and it does help a lot, especially if I am cutting up a bunch of strips.
    I would also suggest practicing on a throw away fabric...cheap stuff that doesn't matter if you throw it away. Practice is the best thing.
    Good luck. Gina
    mike'sgirl is offline  
    Old 01-16-2013, 09:02 AM
      #7  
    Member
    Thread Starter
     
    Join Date: Nov 2012
    Location: Western Australia
    Posts: 9
    Default

    Wow! I have never heard of aqququilt, just watched a couple of youtube clips, looks fabulous but pricey! I am going to investigate these other videos and products you have vall very kindly suggested...fed up with wasting my pretty fabric!
    Fiona O'S is offline  
    Old 01-16-2013, 09:31 AM
      #8  
    Super Member
     
    Join Date: Jun 2010
    Location: Chapel Hill
    Posts: 1,086
    Default

    I agree with Mike's girl - check and see if your fabric is folded correctly. That is the most frequent cause of the "v" in the middle. Harriet Hargrave does a thorough job of explaining how to make sure your fabric is on grain and folded for accurate cutting. It does take some practice.

    Cheers, K
    CorgiNole is offline  
    Old 01-16-2013, 09:45 AM
      #9  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,481
    Default

    I find the easiest way to avoid V shapes in my strips or pieces is to use my large square to rotary cut against. When cutting with a regular ruler it is all to easy to shift the end one way or the other along the fold, that is what makes the V. I am going to try and show a picture of my 15 inch square on a piece of fabric ready to cut. My 15 inch square lets me lay it over regular twice folded 11 inch fabric (44in.)
    Attached Thumbnails Click image for larger version

Name:	image.jpg
Views:	798
Size:	307.4 KB
ID:	388426  
    Tartan is offline  
    Old 01-16-2013, 10:08 AM
      #10  
    Member
     
    Join Date: Sep 2011
    Posts: 98
    Default

    I've started using the Quilters Slidelock for cutting strips and I LOVE it! It holds the fabric and ruler in place and also protects your fingers from the blade. I think you can google Quilters Slidelock for more information.
    okie2tx is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Nokie
    Main
    41
    04-12-2012 08:40 AM
    vlrigdon
    Pictures
    60
    03-18-2012 08:35 PM
    justsojanie
    Main
    61
    10-31-2011 07:24 AM
    Mimito2
    Main
    7
    01-22-2011 04:03 AM
    tarib
    Main
    55
    07-29-2010 07:48 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter