Go Back  Quiltingboard Forums >
  • Main
  • 8 1/2" Nine Patch Block >
  • 8 1/2" Nine Patch Block

  • 8 1/2" Nine Patch Block

    Old 02-16-2013, 03:45 PM
      #1  
    Super Member
    Thread Starter
     
    chickadeee55's Avatar
     
    Join Date: Oct 2010
    Location: Waupaca Wisconsin
    Posts: 1,302
    Default 8 1/2" Nine Patch Block

    Hi,

    Can anyone tell me what size blocks I would need to make a finished 8 1/2" nine patch block. If possible I will try to use strips, but I can't figure out what the width of the strips need to be to get a finished 8 1/2" block after sewn together.

    The closest I came up with was 3 inch strips, three sewn together would give me a finished 8" block, I am not sure that is correct.
    chickadeee55 is offline  
    Old 02-16-2013, 04:03 PM
      #2  
    Senior Member
     
    fatquarters's Avatar
     
    Join Date: Sep 2010
    Posts: 833
    Default

    I think 3-3' would give you a 71/2 "....3- 3 1/2" would give you 9"...3 - 3 1/4 would give you 8 1/4. Soooo ....maybe 3 3/8????


    I might do the 3 1/2 and trim????
    fatquarters is offline  
    Old 02-16-2013, 04:14 PM
      #3  
    Super Member
     
    Join Date: Sep 2010
    Location: Keller, TX
    Posts: 7,417
    Default

    3 5/16 is what EQ7 says. Make a test one first to be sure.
    lfstamper is offline  
    Old 02-16-2013, 04:16 PM
      #4  
    Senior Member
     
    nvb50's Avatar
     
    Join Date: Sep 2012
    Location: Kankakee County in Illinois
    Posts: 494
    Default

    Each strip would need to be 3.3333 inch. If I calculated correctly. 8.5 plus .25 time 2 for each block equals 10 inches.
    10 divided by 3 equals 3.33333333333333333333333333
    nvb50 is offline  
    Old 02-16-2013, 04:25 PM
      #5  
    Super Member
     
    Join Date: Feb 2011
    Location: S. Texas
    Posts: 2,337
    Default

    Just do 3.33333333 and sew a scant bigger seam
    mucky is offline  
    Old 02-16-2013, 05:08 PM
      #6  
    Super Member
     
    Join Date: Feb 2011
    Location: S. Texas
    Posts: 2,337
    Default

    Trimming would make only the outside squares smaller
    mucky is offline  
    Old 02-16-2013, 05:13 PM
      #7  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,163
    Default

    3 1/3 is correct, but are you sure you want the block to be 8.5" finished? You mentioned that you thought three 3" strips would give you 8" finished, but that's incorrect; each 3" strip would be 2.5" finished, so you would get a 7.5" finished block, 8" unfinished.

    For any FINISHED block size, if you want a 9-patch you need to divide the FINISHED block size by 3, then add 1/2 to get the strip size. Conversely, for any strip size, subtract 1/2 and then multiply by 3 to get the FINISHED 9-patch block size. For instance, for an 9" FINISHED block you need to divide 9 by 3 (giving 3) and add 1/2 (giving 3 1/2).

    8.5 is a very unusual size for a finished block. Nothing really goes into 8.5 very nicely. If you look at Marcia Hohn's Quilter's Cache site, you won't see any blocks that are 8.5".
    dunster is offline  
    Old 02-16-2013, 05:14 PM
      #8  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,163
    Default

    Originally Posted by mucky
    Just do 3.33333333 and sew a scant bigger seam
    Don't sew a bigger seam, because you really do want the strips to be exactly 3 1/3 inches, using 1/4" seams, to get a block that is 8.5" finished.
    dunster is offline  
    Old 02-26-2013, 07:28 PM
      #9  
    Member
     
    Join Date: Feb 2011
    Location: Sun Lakes, AZ
    Posts: 35
    Red face

    This was IMMENSLY helpful and timely for me! Thank you all, especially dunster! The reason I require the oddball 8.5" finished nine-patch block, is that I'm cutting multiple fat quarters into four 9" square blocks which will be alternated with nine-patch blocks to make a patchwork-looking picnic blanket. Thanks to you all...

    Last edited by kaleda; 02-26-2013 at 07:29 PM. Reason: clarification
    kaleda is offline  
    Old 02-26-2013, 08:21 PM
      #10  
    Junior Member
     
    Join Date: Feb 2013
    Location: Central Maryland
    Posts: 230
    Default

    Dunster - thank you so much. I am a little rusty in my 'quilter's math' and that last block I made, I had to draw it out to make sure that I had the correct block size for a donation block. I was thinking of making some 9 patches next and your directions were very timely

    Sylvia
    MothrNatr is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    bearisgray
    General Chit-Chat (non-quilting talk)
    65
    02-01-2024 09:04 AM
    vjohn1006
    Pictures
    111
    07-26-2014 03:14 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter