Go Back  Quiltingboard Forums >
  • Links and Resources
  • Frustrated with fabric movement when cutting strips and pieces? >
  • Frustrated with fabric movement when cutting strips and pieces?

  • Frustrated with fabric movement when cutting strips and pieces?

    Old 08-27-2014, 03:53 PM
      #1  
    MCH
    Junior Member
    Thread Starter
     
    MCH's Avatar
     
    Join Date: Nov 2006
    Location: San Francisco Bay area
    Posts: 223
    Default Frustrated with fabric movement when cutting strips and pieces?

    For most of us, anything that can lessen or eliminate a frustration, be it big or small, when we're in the process of creating a quilt is welcome. In my case, I had some frustration cutting strips and pieces, but "chalked it up" to some level of incompetence or lack of paying attention. I was sure I was holding the ruler securely against the cutter, but there was always that gnawing doubt in the back of my mind. When I would sew all the block pieces together, confirm that my seam allowance was correct, etc., frequently the block would still be a bit wonky.

    Disclaimer: I've been sewing since I was 10 and to give you an idea of how long ago that was, I watched the original TV broadcasts of Hopalong Cassidy and the the opening of the the original Disneyland on a 12" black and white TV.

    Anyway, something was "haywire"...and I couldn't quite put my finger on it.

    Well, I've put my fingers on the Slidelock tool. Folks, if all your budget will allow, buy at least the smaller one. You will not be disappointed. I recently finished piecing a quilt top for a grand niece. That quilt top is perfectly square. No tugging, pulling, or "fussing". Every side aligned, no matter how I folded the quilt top.

    The only thing different about the process of making this latest top was that I cut the pieces using the Slidelock. It's my "go to" tool, now.

    As the saying goes, "The first cut is the hardest." Not anymore. I align the tool and my ruler on the fabric according to the directions that come with the Slidelock and the first cut is easy and accurate...and all those that follow are just as easy and accurate.

    There's no need to push down with any real force to cause the tool to stabilize the fabric. Just rest your open hand on it and it does the rest. The tool is an example of a simple solution (makes perfect sense) to a quilting vexation and frustration..

    Check it out here: http://quiltersslidelock.com/

    Happy stripping...er, cutting. (Giggle)
    MCH is offline  
    Old 08-27-2014, 04:24 PM
      #2  
    Senior Member
     
    Join Date: Oct 2010
    Location: in my stash mostly
    Posts: 882
    Default

    Thanks for this info!!

    delma
    delma_paulk is offline  
    Old 08-27-2014, 04:47 PM
      #3  
    Super Member
     
    Dolphyngyrl's Avatar
     
    Join Date: Jan 2009
    Location: Southern California
    Posts: 6,254
    Default

    The craftsy class cut to it is a big help for me, really showed me new techniques for cutting
    Dolphyngyrl is offline  
    Old 08-27-2014, 04:50 PM
      #4  
    Member
     
    Join Date: Jul 2012
    Posts: 14
    Default

    I've watched the video but can't figure out how it keeps from sliding when you are cutting.
    lisadams is offline  
    Old 08-27-2014, 05:06 PM
      #5  
    Senior Member
     
    Jennie and Me's Avatar
     
    Join Date: Jul 2011
    Location: N.W. Missouri
    Posts: 858
    Default

    I recently bought both sizes and they are fantastic. Would definitely recommend these. Yes, a tad pricey, but so worth it. Your fabric won't slip!
    Jennie and Me is offline  
    Old 08-28-2014, 04:10 AM
      #6  
    Senior Member
     
    Up4BigChal's Avatar
     
    Join Date: Apr 2010
    Location: Shakopee MN
    Posts: 498
    Default

    Sounds like you found a solution. I'm average height and I've got my cutting table at a height that is comfortable for Me! I've watched my mom who is a good 5 inches + shorter then me try to cut on a table that is not correct height for her and I can see why she is have trouble cutting!! if it's to high she is arching her hands and then the rotary cutter isn't cutting because she is at a weird angle. I think to be successful all things should be considered. Get your cutting area at the right height make sure you can comfortably use the rotarty cutter with out arching you hand relax and stop forcing it.
    Up4BigChal is offline  
    Old 08-28-2014, 04:14 AM
      #7  
    Senior Member
     
    Join Date: Jan 2011
    Location: Pine Grove, PA
    Posts: 466
    Default

    I use small pieces of shelf liner under my ruler. Stays put every time. But I may just look into buying this ruler! Love new helpful things.
    Ellageo is offline  
    Old 08-28-2014, 04:45 AM
      #8  
    Junior Member
     
    Join Date: Aug 2014
    Location: New Jersey
    Posts: 155
    Default

    MCH, Thank you for the great info, I can't afford one right now, but sure going to put this Slidelock on my wish list. :-)
    I need all the help I can get LOL Thank you so much for the informative video.
    Also, Dolphyngyrl: where did you find the cutting class? I am a beginner and I think that would help me immensely to take a cutting class. Thank you have a great day everyone. Rachel
    shayarene is offline  
    Old 08-28-2014, 07:01 AM
      #9  
    Senior Member
     
    ladydukes's Avatar
     
    Join Date: Apr 2012
    Location: Richmond, Texas
    Posts: 846
    Default

    I've had a Slide-Lock ruler for a couple of years and LOVE IT! No more slipping. I have the large one but need to purchase the smaller one...some day!! It is one of the best tools I own, if not THE best!
    ladydukes is offline  
    Old 08-28-2014, 10:46 AM
      #10  
    Super Member
     
    Join Date: Mar 2012
    Location: Kenai, Alaska
    Posts: 1,150
    Default

    I have the large and small and keep wondering why did I buy these when I could use two rulers instead and then--VOILA! I remember how much I like them as they keep the fabric from moving. Wouldn't cut without them now.
    MarleneC is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    MamaDonna
    Main
    14
    11-03-2013 02:52 AM
    nanabirdmo
    Pictures
    177
    01-05-2012 05:47 PM
    Holice
    Main
    131
    08-22-2011 09:55 AM
    Snorky Lvs2Quilt
    Main
    16
    04-21-2011 09:57 PM
    wildyard
    Main
    104
    02-10-2011 09:32 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter