dresden plate help
#12
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,131
I agree with Prism99. If you made an accurate template without seam allowances cut of light cardboard, I think you may spot your problem. If you are just off the width of a needle, it all adds up very quickly. Sewing on the bias is so critical that is why I try to avoid it.
Quiltedsunshine, your blocks are beautiful!
Quiltedsunshine, your blocks are beautiful!
#13
Super Member
Join Date: Jan 2011
Location: Cottage Grove, MN
Posts: 2,809
mrodarme: Thanks for asking this question. I am having the same problem with one of my 1/2 plates. It also isn't quite a full 1/2 circle. I may need to redo a few seams.
I like the ideas and the YouTube video. Thanks to everyone that takes the time to answer questions so we can all learn.
Happy New Year!
Connie
I like the ideas and the YouTube video. Thanks to everyone that takes the time to answer questions so we can all learn.
Happy New Year!
Connie
#14
Junior Member
Thread Starter
Join Date: Jul 2012
Location: sc
Posts: 115
i have gone back & done a lot of what was suggested, but couldnt find one specific thing throwing off the pattern..i appreciate all the suggestions, but this has been a lot of work...one more question -
do you press open the back seams, between the blades or around the circle in one direction...ive tried both, & like the all one way...but that seems to add to the nudging of the fabric going off...im not using any steam, but am starching...
thanks to all, i had an idea of these as wreath candle mats for xmas next year...i may rethink that...
do you press open the back seams, between the blades or around the circle in one direction...ive tried both, & like the all one way...but that seems to add to the nudging of the fabric going off...im not using any steam, but am starching...
thanks to all, i had an idea of these as wreath candle mats for xmas next year...i may rethink that...
#15
If you are considering making candle mats (small projects, I LOVE them!), try sewing the blades right onto the backing fabric? Or even do a quarter circle, leaving a cross of fabric between 4, so it's a "focus" for the candle. No one need know that you had any problem at all! It would be unique and you could make a load of them in sequence, with minimal fuss and headache! As a matter of fact, hmmmmm, I think I might try one later today! LOL, now you've gone and done it!
Happy New Year!
Happy New Year!
#16
you may have to lay it out upside down (wrong side up) and then pin the seams a bit starting from the inner circle area. just a bit. may only take a few to help it look better. then stitch one and lay out and so on until they look nice. starch does wonders, so for next cuts do that first.. Good luck.
#18
Super Member
Join Date: Jan 2012
Location: NE Missouri
Posts: 6,418
Are you sewing from the center out or from the outside in? I have made several DP and a lot of stack n whack circles and had this problem sometimes. My home ec teacher taught us to "pet the kitty" and if it rubbed the ends of the fabric wrong, you should sew the other day. I think the instructions said to sew from the center out. Following the kitty analogy, this would be wrong. Well, I finally tried it the other way, and the results and difference have been astonishing. I am now sewing from the center out. Don't know what difference is, but working so much better. I don't know whether starting in the center distorts less since you have fabric to guide or what. When you go the other way, it gets down to a sliver and it is very easy to pull or relax so you don't get your fingers caught.
#19
I have made literally hundreds of these. Here's what works for me. First, I never prewash my fabric. Press with Best Press starch alternative before cutting. Cut strip of fabric to size of wedge. Never cut more than four layers at once and use a new rotary blade. When sewing together, start at the wide end. Start sewing down from the top about the width of two or three stitches and then backstitch to the top, then continue to the bottom narrow end of the blade. Do NOT chain piece. The backstitch serves a couple purposes... It lets the feed dogs have fabric to start on, which avoids distortion, and it also hides the thread tails inside the plate. (Always give the dogs a bite!.) I use a stiletto to keep the bottoms lined up. As others said, sew in pairs, then add one more blade between two pairs to make a group of five wedges. Make four sets of five wedges. Sew into half circles, then combine the halves. If they are warping at the bottom, I'd bet a dollar to a donut that either your seams are slipping or you may be pushing or pulling when sewing. Let the feed dogs do all the work. Other than that, when you sew two wedges, remove from machine and check your seam on the under side to be sure nothing has shifted. Just go slow and you'll get the hang of it. If you are one that normally prewashes, don't, then when your quilt is done add a couple Color Catcher sheets to the wash. Oh and my preference is to press all the seams in the same direction from the back side, then I turn it over and press the front, using a little Best Press. This is the method that works for me. Hope it helps you. Jan
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
03-18-2011 06:03 PM
craftybear
Links and Resources
1
03-11-2011 07:23 AM