Those pesky points!!!!
#21
Here's what I found works for me....check the quarter in. measurement from needle to seam. Done! Next, I began using Aurofil thread. It's visibly thinner than the old Coats and Clark and Mettler 50 wt.. That change alone made a tremendous difference. But, the coup d'etat on precision came from two things. Sister Marie Clare told us (40 years ago) that our iron was the most important tool we had when sewing. I believed her and I make sure everything is pressed properly open, etc. And then (drum roll.....) the ever popular Elmers School Glue. A drop on the nested seam, NO iron necessary. Just press closed with fingers and sew. BINGO! perfect points. If gluing a row of blocks together, I hit each seam with Elmers, pinch together and place a pin somewhere to hold the place until ready to sew. I then proceed to the next block. I cannot tell you what doing the above has meant for reduction of eye twitches when I look at my work. I'd say 98% of all my seams are breathlessly perfect. The other 2% were usually gross piecer error and I need to stay humble so I rip. Hope you try these things and live happily ever after!
#22
Power Poster
Join Date: Feb 2011
Location: Lowell, MA
Posts: 14,083
I have found that if a pattern calls for 4 7/8" pieces, I round that up to 5", then piece the HST's and then trim to the proper size. To me, it's just faster and easier to trim the HST's to size, and I know the block will come together easier and be less troublesome to piece, leading to more accurate blocks in my quilts.
#24
Super Member
Join Date: Aug 2010
Location: Upstate New York
Posts: 1,231
..I was going to say that I use school glue...it works better than anything I've ever tried. I run a line of school glue, put my pieces together, then flip back on piece to approx. where the 1/4" seam would be..if it lines up perfectly, i pinch it to sort of "set it"...if not, the school glue allows you to slide the fabric left or right, up or down...till it looks perfect! I cannot express how much I love school glue sticks!!!
#25
Senior Member
Join Date: Aug 2012
Posts: 421
I would suggest buying a 1/4inch with guide presser foot. I bought one for all of my sewing machines. I find it makes perfect 1/4 inch seams. I also found on e-Bay a small ruler for accurate seams. It was inexpensive, just a thought to make your seaming easier.
Thread
Thread Starter
Forum
Replies
Last Post
kitsykeel
General Chit-Chat (non-quilting talk)
6
08-12-2012 04:30 PM
Charlee
For Vintage & Antique Machine Enthusiasts
6
07-26-2012 10:05 AM
emsgranny
General Chit-Chat (non-quilting talk)
31
11-14-2010 03:45 AM