miriam

Good news - I got the white off
Good news - no decals damaged
Bad news - it took off a lot of black
Bad news - there is a line around where the white WAS.
Bad news - dull place around that line

wilburness

glenn how did you figure out to use spray n wash? What would even make you think of that. my mind just boggles up on you knowledge on how to clean these ol' SM

Glenn

I think I heard this from my mother a long time ago and yes it does work. I learned a lot thru trial and error over many years and you only hear of the success not the failers LOL
Skip

Glenn

Miriam lightly sand the line a dull area with very fine wet or dry paper using a little turps as a lub, clean with naptha and then french polish the area to bring back the shine
PS the sanding will level the line out.

miriam

fine sand paper or steel wool?

Glenn

I never mentioned steel wool anywhere LOL Sand paper wet or dry, the sandpaper used on car finishes. I use 400 and 800 grit. I never use steel wool on the machine except the shiny metal parts.

miriam

just my blonde streak - makin' sure

Glenn

You are forgiven this time.

SteveH

I SO understand this. When I do shows with my Armor, I get lots of "wow, i tried like 4 or 5 times and couldn't get that right". I have started taking my box of failures showing the evolution of the attempts, 15 maybe 20 iterations to get it right... People are shocked that i failed so much. I said any "master" has...

My Great-Grandfather was a carpenter and used to tell my Grandfather that the only difference between a craftsman and a failure was quiting....

miriam

The only real failure is the failure to try.

Success is a lousy teacher. It seduces smart people into thinking they can't lose.