Did I ruin my machine?
#1
Member
Thread Starter
Join Date: Feb 2011
Location: Michigan
Posts: 54
![Default](/images/icons/icon1.gif)
Today, knowing that I was going to try out the ruffler and practice for a Christening gown I'm working on, I oiled my Singer 301. So, I'm looking at the instructions, take off the bottom, drip oil all over, take off the top, look at all the arrows, and when I'm done I take a closer look at the written instructions.
Do not ever oil the gears. Oops. I oiled the gears. You are supposed to use "lubricant", which apparently is a different species from oil.
I did set up the ruffler and try it out. What do I do?
Do not ever oil the gears. Oops. I oiled the gears. You are supposed to use "lubricant", which apparently is a different species from oil.
I did set up the ruffler and try it out. What do I do?
#3
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,461
![Default](/images/icons/icon1.gif)
The lubricant that goes onto the gears on my machine is a thicker kind of goopy stuff. Machine oil will probably disolve the lubricant if there was some on the gears. I don't think it will do any damage but the gears will have to be re-lubricated to prevent wear on the gears? I am not a machine expert so I am just guessing.
#6
![Default](/images/icons/icon1.gif)
Singer lube is getting harder to find. Jenny has it at Sew Classic, and most shops should be able to order it, but you may have to buy 6 tubes at a time (minimum order for most dealers, here in Canada at least, so YMMV)
This is what Singer recommends for the gears. It's thicker, stays in place, and doesn't "liquify" as fast when it gets warm, hence why we also use it in the Singer motors that require it.
That said, I've heard of people using all sorts of grease on the gears (the motor must have the Singer lube, so it doesn't hurt to buy it and use it for the gears too) - TriFlow's grease product, Vaseline, axle grease, etc.
And no, you didn't ruin your machine.
You just aren't finished the maintenance.
This is what Singer recommends for the gears. It's thicker, stays in place, and doesn't "liquify" as fast when it gets warm, hence why we also use it in the Singer motors that require it.
That said, I've heard of people using all sorts of grease on the gears (the motor must have the Singer lube, so it doesn't hurt to buy it and use it for the gears too) - TriFlow's grease product, Vaseline, axle grease, etc.
And no, you didn't ruin your machine.
![Smile](https://cdn.quiltingboard.com/images/smilies/smile.png)
#8
![Default](/images/icons/icon1.gif)
I don't think I'd ever use it personally. I've heard of it, but I don't think I've ever had a "Grease emergency" where I'd need something that quickly. There are so many good greases out there for gears that there's not a lot of reason for it.
I wouldn't mind seeing the site you mentioned...?
I wouldn't mind seeing the site you mentioned...?
#9
Super Member
Join Date: Feb 2012
Posts: 8,091
![Default](/images/icons/icon1.gif)
Go to Sew-Classic and buy a tube of TRI-FLOW grease and oil. Lube the gears with the grease and everything else with the oil. The T-F grease is superior to the Singer Lube for gears and works wonders on them. You should also pick up a couple tubes of the Singer Lube for the motors that use it too.
You didn't hurt the machine but the oil you put on the gears will not lube them for long.
Joe
You didn't hurt the machine but the oil you put on the gears will not lube them for long.
Joe
#10
![Default](/images/icons/icon1.gif)
Today, knowing that I was going to try out the ruffler and practice for a Christening gown I'm working on, I oiled my Singer 301. So, I'm looking at the instructions, take off the bottom, drip oil all over, take off the top, look at all the arrows, and when I'm done I take a closer look at the written instructions.
Do not ever oil the gears. Oops. I oiled the gears. You are supposed to use "lubricant", which apparently is a different species from oil.
I did set up the ruffler and try it out. What do I do?
Do not ever oil the gears. Oops. I oiled the gears. You are supposed to use "lubricant", which apparently is a different species from oil.
I did set up the ruffler and try it out. What do I do?
Thread
Thread Starter
Forum
Replies
Last Post
runninL8
For Vintage & Antique Machine Enthusiasts
25
10-24-2013 06:09 AM
trupeach1
General Chit-Chat (non-quilting talk)
26
07-09-2010 05:27 PM