301 cabinet desirable?
#1
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,830
301 cabinet desirable?
I mentioned buying a 15-91 a couple of months ago. I took the cabinet from my 600 machine and put the 15-91 in it. Then, I put the 600 in the 15-91 cabinet. There is not enough space for the 600 to go down in the 15-91 cabinet. It fits in the cut out but the cabinet is not deep enough to drop the machine head.
Once I realized that, I checked the cabinet again. The original 15-91 cabinet had the clips for a 301. I have an extra cradle for a 301. Is it desirable as a 301 cabinet without a machine? I have a really ugly, messy 301, which should be a parts machine. However I have a 15-91 in good shape I could put in the cabinet and sell it like that.
What do you suggest, as I need to get rid of some of my machines for space.
bkay
Once I realized that, I checked the cabinet again. The original 15-91 cabinet had the clips for a 301. I have an extra cradle for a 301. Is it desirable as a 301 cabinet without a machine? I have a really ugly, messy 301, which should be a parts machine. However I have a 15-91 in good shape I could put in the cabinet and sell it like that.
What do you suggest, as I need to get rid of some of my machines for space.
bkay
Last edited by bkay; 09-27-2021 at 08:05 AM. Reason: correction
#4
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,444
#5
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822
If you're not going to fix up your messy 301 maybe set up the table to hold the 301, drop in the 301 and sell it as is? I've been looking for a 301, just because I've never had one, and I think priced right it would go quickly. Plus you move a machine and a table out!