Go Back  Quiltingboard Forums > Tutorials
Quilted purses >

Quilted purses

Quilted purses

Old 03-15-2011, 10:58 AM
  #1  
Super Member
Thread Starter
 
ontheriver's Avatar
 
Join Date: Jan 2011
Location: Selma Alabama
Posts: 3,628
Default

Ok, here is tut on my quilted bags. It may be kinda long, sorry about that.

this take approx 3/4 yard for straps, lining, outer bag and approx. 1/2 yard for outer contrasting pockets.

Cut 2 pieces 21 1/2 x 16 of main fabric (this is the solid one I used that shows at the top and it will also be your lining)
Cut 2 pieces of batting the same size.

Lay fabric over batting and quilt as desired. Do both pieces. I usually just stipple cause I am a beginner at FMQ
[ATTACH=CONFIG]170212[/ATTACH]

here it is quilted
[ATTACH=CONFIG]170213[/ATTACH]

after quilting trim these pieces 14 1/2 x 20 1/2. I start larger and trim in case of slippage when quilting.
[ATTACH=CONFIG]170214[/ATTACH]

cut fabric for your straps 4 x 50. It is fine to piece strips to get right length. Iron strips in half wrong sides together. Then iron edges in to meet center . Place 1 in. strip in one of the folds. I use up scraps of batting this way and I have pieced scraps of batting together to do this.
[ATTACH=CONFIG]170215[/ATTACH]

Fold in, press, pin.
[ATTACH=CONFIG]170217[/ATTACH]

Sew down both sides of straps and set them aside for the moment.
[ATTACH=CONFIG]170218[/ATTACH]

Cut 2 pieces of your contrasting fabric, the one for the outside pocket, 14 1/2 x 16 1/2. Fold in half long ways wrong sides together. Press at fold then top stitch across the fold. Do both pieces.
[ATTACH=CONFIG]170219[/ATTACH]

Lay contrasting pieces on quilted panel with raw edge even with the bottom and folded edge towards the center. the center will be the top of both the bag and the lining. Pin in place.
[ATTACH=CONFIG]170222[/ATTACH]

Pin strap onto contrasting piece 3 1/2 to 4 inches from side. Curve it up and around and pin other end on other side of piece. Do this with both straps.
[ATTACH=CONFIG]170226[/ATTACH]

Sew straps along both edges that are over contrasting fabric.
[ATTACH=CONFIG]170229[/ATTACH]

I go from bottom edge up towards center then turn and go across short width and turn and go down the other side.
[ATTACH=CONFIG]170231[/ATTACH]

Now for open inside pockets. Cut piece of whatever fabric you want to use 14 1/2 x 16. Fold this long way right sides together so it is 14 1/2 x 6. Sew the 14 1/2 side. Turn right side out, press, top stitch folded side.
[ATTACH=CONFIG]170235[/ATTACH]

Sew to paned along edge to the bottom. Divide into thirds and sew from middle to bottom. Remember center is up so you want to sew the long seam at the bottom.
[ATTACH=CONFIG]170237[/ATTACH]

now for the zipper. this is how I have been doing it. I am not good a zippers and there may be a better, nicer way to do it, but I was going for simple. Cut fabric for this pocket10 1/2 x 10 1/2. Fold in half wrong sides together. Sew around 3 sides leaving opening for turning. Turn, press and sew opening shut. Turn under raw edges first. Place zipper across one long side. Sew zipper onto pocket piece.
[ATTACH=CONFIG]170238[/ATTACH]

Use a plastic zipper and cut to fit your pocket by sewing back and forth over the end several times and then cut. This way you do not have to worry about having the exact size zipper.
[ATTACH=CONFIG]170240[/ATTACH]

Lay pocket on panel with zipper to the middle. Mark top of zipper with a couple of pins.
[ATTACH=CONFIG]170241[/ATTACH]

Now flip pocket over so it is over the part with the straps making sure zipper pull in on the bottom.
[ATTACH=CONFIG]170242[/ATTACH]

Sew along very edge of the zipper. Then flip it back over.
[ATTACH=CONFIG]170243[/ATTACH]

After you flip pocket back over, finger press the zipper down and sew along it again. This will help it lay flat on the panel.
[ATTACH=CONFIG]170244[/ATTACH]

Now sew the three sides of the pocket to the panel.
[ATTACH=CONFIG]170245[/ATTACH]

Voila, zipper pocket is done. I know a lot of the zipper shows but I kinda like the color contrast. Maybe some day I'll figure out a better way, but for me this works.
[ATTACH=CONFIG]170246[/ATTACH]

Pin your straps out of the way or have Jack the Ripper handy.
[ATTACH=CONFIG]170247[/ATTACH]

Lay your 2 panels right sides together straps at the same end . Match straps together and sides of outer pockets together.
[ATTACH=CONFIG]170248[/ATTACH]

Sew around all sides leaving an opening for turning on side opposite of straps.
[ATTACH=CONFIG]170249[/ATTACH]

This part makes me cringe. Cut up what I just worked so hard to put together, but anyways, cut out a 1 1/2 in square from each corner.
[ATTACH=CONFIG]170250[/ATTACH]

Open corners and match seams. Called boxing the corners.
[ATTACH=CONFIG]170254[/ATTACH]

Sew across the corners, all 4 of them.
[ATTACH=CONFIG]170255[/ATTACH]

Will look like this.
[ATTACH=CONFIG]170256[/ATTACH]

turn it right side out. May take a bit of wrestling but it can be done. Then unpin the straps.
[ATTACH=CONFIG]170257[/ATTACH]

turn raw edges of opening and whip stitch closed.
[ATTACH=CONFIG]170258[/ATTACH]

Fold at the middle and kinda work the lining down into place. Make sure corner line up with each other. You just kinda have to play with it to get it into shape.
[ATTACH=CONFIG]170259[/ATTACH]

After you have lining in place the way you want it sew around the top of the bag to keep it in place.
[ATTACH=CONFIG]170260[/ATTACH]

And your all done. One quilted bag. On some of mine I put snaps as a closure. I use the kind that goes on like a grommet. Hope you all understand, any questions just PM me.
[ATTACH=CONFIG]170261[/ATTACH]

My quilt police has been with me the whole time I have been posting this and is now tired and lying down for a nap.
[ATTACH=CONFIG]170262[/ATTACH]
Attached Thumbnails attachment-170207.jpe   attachment-170208.jpe   attachment-170209.jpe   attachment-170210.jpe   attachment-170212.jpe  

attachment-170213.jpe   attachment-170214.jpe   attachment-170217.jpe   attachment-170221.jpe   attachment-170224.jpe  

attachment-170226.jpe   attachment-170230.jpe   attachment-170232.jpe   attachment-170233.jpe   attachment-170235.jpe  

attachment-170236.jpe   attachment-170237.jpe   attachment-170238.jpe   attachment-170239.jpe   attachment-170240.jpe  

attachment-170241.jpe   attachment-170242.jpe   attachment-170243.jpe   attachment-170244.jpe   attachment-170245.jpe  

attachment-170249.jpe   attachment-170250.jpe   attachment-170251.jpe   attachment-170252.jpe   attachment-170253.jpe  

attachment-170254.jpe   attachment-170255.jpe   attachment-170256.jpe   attachment-170257.jpe  
ontheriver is offline  
Old 03-15-2011, 11:28 AM
  #2  
Super Member
 
Join Date: Jan 2010
Location: western ny
Posts: 1,533
Default

Thanks for the tut!! Will bookmark and try soon!!!
bstock is offline  
Old 03-15-2011, 12:06 PM
  #3  
Junior Member
 
Nanny J's Avatar
 
Join Date: Mar 2011
Location: Flint Hills of Kansas
Posts: 118
Default

I will be making one this weekend! Great tut!!
Nanny J is offline  
Old 03-15-2011, 12:08 PM
  #4  
Super Member
 
Beachbound's Avatar
 
Join Date: Jan 2010
Location: Mount Dora Florida
Posts: 1,235
Default

Nicely wrote & explained! I am going to have to give this a try. Thanks!
Beachbound is offline  
Old 03-15-2011, 12:18 PM
  #5  
Super Member
 
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Default

Thanks for the great tutorial.
pocoellie is offline  
Old 03-15-2011, 12:22 PM
  #6  
Senior Member
 
kwendt's Avatar
 
Join Date: Dec 2010
Location: Coastal Florida
Posts: 946
Default

Great! Thanks... simple is good for me! I can do this! I'll use my own quilt inspectors for the final approval...... <grin>
kwendt is offline  
Old 03-15-2011, 12:44 PM
  #7  
Super Member
 
AngieS's Avatar
 
Join Date: Sep 2010
Location: Western Kentucky
Posts: 3,209
Default

You did a fantastic job! Thank you!!! :thumbup: Can't wait to try it!!
AngieS is offline  
Old 03-15-2011, 01:30 PM
  #8  
Super Member
 
AlwaysQuilting's Avatar
 
Join Date: Nov 2008
Posts: 1,665
Default

Thanks for the tutorial. I'm going to make one this weekend.
AlwaysQuilting is offline  
Old 03-15-2011, 01:48 PM
  #9  
Super Member
 
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,207
Default

You did a wonderful job on this with all the pics and directions. Thanks so much. I have heard(?)that stores are soon going to quit using plastic bags so perhaps we will need many of these for shopping.
SandyinZ4 is offline  
Old 03-15-2011, 01:59 PM
  #10  
Super Member
 
Join Date: Nov 2010
Location: Illinois
Posts: 3,915
Default

WOW. thank you very much
craftymatt2 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lyncat
Pictures
14
11-27-2012 08:10 PM
barnbum
Pictures
62
07-09-2010 05:36 AM
sewnsewer2
Pictures
30
06-28-2010 02:31 PM
ScrapQuilter
Pictures
54
06-21-2010 08:18 AM
salisaquilter
Main
14
07-09-2008 12:09 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter