Go Back  Quiltingboard Forums > Tutorials
How to make a drawstring, two pocket bag using 2 squares >

How to make a drawstring, two pocket bag using 2 squares

How to make a drawstring, two pocket bag using 2 squares

Old 08-01-2011, 10:27 AM
  #1  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

This is a really cute bag that is super easy to make. You need two 18 inch squares of fabric, 1 1/2 yards of cording, and your normal sewing supplies.

My original bag
[ATTACH=CONFIG]234886[/ATTACH]
Attached Thumbnails attachment-234880.jpe  
np3 is offline  
Old 08-01-2011, 10:30 AM
  #2  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Try to pick contrasting fabrics. You want the pocket to be a noticeable surprise! FQs work well and waste less fabric since you are making an 18 inch square.
Attached Thumbnails attachment-234886.jpe  
np3 is offline  
Old 08-01-2011, 10:34 AM
  #3  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

You want a nice 18 inch square for this tutorial but you can increase or decrease the size of your bag. You just need to do the math on where to measure on the sides. That will make more sense later.

Stitch around using 1/4 inch seam allowance. You will leave an opening for turning, about 3or 4 inches.
[ATTACH=CONFIG]234897[/ATTACH]
Attached Thumbnails attachment-234890.jpe   attachment-234891.jpe  
np3 is offline  
Old 08-01-2011, 10:38 AM
  #4  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

The next step is simple. You are going to clip the corners, turn it right sides out making sure you get your points nice and "pointy". Then you are going to slip stitch the opening closed and give it a good pressing.

Don't try to rush the process and skip the ironing. It is key to the folding process later.
Attached Thumbnails attachment-234893.jpe   attachment-234894.jpe   attachment-234895.jpe  
np3 is offline  
Old 08-01-2011, 10:44 AM
  #5  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Now you are going to measure down 6 inches on both sides of one corner. Do the same for the opposite side corner. See photo below.

Mark
[ATTACH=CONFIG]234905[/ATTACH]

Fold
[ATTACH=CONFIG]234906[/ATTACH]

Pin but don't catch the bottom piece in!!
[ATTACH=CONFIG]234907[/ATTACH]
Attached Thumbnails attachment-234899.jpe   attachment-234900.jpe   attachment-234901.jpe  
np3 is offline  
Old 08-01-2011, 10:46 AM
  #6  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Stitch the piece that you just pinned.
Attached Thumbnails attachment-234902.jpe   attachment-234903.jpe  
np3 is offline  
Old 08-01-2011, 10:51 AM
  #7  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Now you are ready for the center stitch line. I know this looks strange but it is necessary. It forms the bottom of the two pockets and keeps the fabrics together.

Draw line, I used a frixion pen
[ATTACH=CONFIG]234915[/ATTACH]

still see the black line
[ATTACH=CONFIG]234916[/ATTACH]

iron it and the line is gone!
[ATTACH=CONFIG]234917[/ATTACH]
Attached Thumbnails attachment-234909.jpe   attachment-234910.jpe   attachment-234911.jpe  
np3 is offline  
Old 08-01-2011, 10:58 AM
  #8  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Now you are ready for the casing for the cording.

Fold down 1 inch on each side. You are going to draw a line from edge to edge. Then mark another line 5/8 inch from that one (closer to the fold).

Stitch the two marked lines on both sides of your bag.
Attached Thumbnails attachment-234916.jpe   attachment-234917.jpe   attachment-234918.jpe  
np3 is offline  
Old 08-01-2011, 11:05 AM
  #9  
Senior Member
 
barking-rabbit's Avatar
 
Join Date: Oct 2010
Location: east of Seattle
Posts: 430
Default

I feel like you need to continue this. I don't see how it turns into a bag. Maybe just me.
barking-rabbit is offline  
Old 08-01-2011, 11:09 AM
  #10  
np3
Power Poster
Thread Starter
 
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Default

Now you are ready to sew the sides together. It is easier than it sounds or looks so don't get discouraged!

Fold the right sides together. The right side is the side with the pocket. So you are folding the pockets together. You want to be sure and pull the pocket flaps out of the way so that you don't accidentally catch them in the stitching.

Pin from the one inch line all the way to the bottom on both sides. Stitch very close to the edge. You don't want any seam allowance or any extra bulk. Just make sure that you catch both sides or you will have a hole in the side of your bag.
Attached Thumbnails attachment-234927.jpe   attachment-234928.jpe   attachment-234929.jpe  
np3 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
np3
Tutorials
33
10-09-2011 08:11 AM
craftybear
Links and Resources
1
08-08-2011 10:16 AM
craftybear
Links and Resources
3
11-30-2010 05:01 AM
sondray
Links and Resources
0
12-08-2009 10:09 AM
sondray
Links and Resources
2
07-22-2009 06:42 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter