Go Back  Quiltingboard Forums > Tutorials
Heavy duty design wall >

Heavy duty design wall

Heavy duty design wall

Old 05-12-2016, 03:59 AM
  #1  
Super Member
Thread Starter
 
Join Date: Jan 2008
Location: Winchester, VA
Posts: 1,552
Default Heavy duty design wall

I purchased, several years ago, the largest "collapsable" design wall I could find, and found it terribly frustrating. Pieces would not stay on the flannel...it was wobbly, flimsy, etc......so for the past 2+ years I have used my floor as the design wall. Needless to say, this was not optimum, but certainly was better than what I had.

Fast forward to a visit with my neighbor, and spied her design wall (she does small quilts and wall hangings)....She had a strip of powder coated metal 6 feet long by 2.5 inches wide fastened to her wall with dry wall screws.....very un-obtrusive. She had heavy duty magnets that were shaped like push pins ( from KJM Magnets ) that held her batting to the metal........When I oohed and ached....,she said if I wanted one, she would get her husband to do it for me!!


I wanted a metal strip 120" long ( I make king and queen sized quilts mainly ) mounted at the top of the wall, abutting the ceiling. Ron provided website for the magnets (delivered day after I ordered them) and showed up to install the metal strip. (Metal strip is pre-drilled every 6", and comes in various lengths...sold by Lowes, Home Depot,. etc.)

Since I was in a hurry to start using it, I opened a package of the Dream Green batting, and fastened it up to the bar with my new magnets ( I got 18 so I could hang something heavy on the 120 inch width)....and started adding my units........the fabric sticks to this batting just like it had been sprayed with 505!! I had 11 rows of 12 pieces each row up on this, re-arranging, and not one piece fell off!!

Since I had this mounted at the top of the wall, when the batting, etc is off, you do not even notice the bar! Since Ron had said how strong the magnets were (warning to keep away from computerized machines, cell phones, credit cards, etc)...I tried hanging a full size finished quilt........and it stayed up with no sagging!!! So I can use this to "hang" a quilt to decorate my sewing room when I am not using it as a design wall.

After reading a post that said chenille squares would not stay up on member's design wall, I thought I would post this...........This one will hold just about anything if you have a sufficient number of the magnets......and with their shape, they are easy to remove as well.
Shorebird is offline  
Old 05-12-2016, 04:23 AM
  #2  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

Great idea! Even though the metal strip is unobtrusive, you could paint it to match your wall.
I also used a 'design floor' and was amazed at how much better my quilts were when I finally got a vertical display. I do a lot of scrappy quilts and it makes it much easier to distribute the colors.
PaperPrincess is offline  
Old 05-12-2016, 04:41 AM
  #3  
Power Poster
 
Join Date: Jun 2011
Location: Southern California
Posts: 19,131
Default

I am in an apt so I couldn't use that but it works for you, that is terrific. I still use the 1" insulation covered with flannel. It has worked for me for over 15 years.
ManiacQuilter2 is offline  
Old 05-12-2016, 05:24 AM
  #4  
Senior Member
 
Join Date: Nov 2012
Posts: 903
Default

I love this idea - Does the batting just hang from one bar at the top?
maminstl is offline  
Old 05-12-2016, 05:43 AM
  #5  
Super Member
 
BluegrassGurl's Avatar
 
Join Date: Jan 2011
Location: Kentucky
Posts: 1,522
Default

What a great idea!!! Thank you for sharing.
BluegrassGurl is offline  
Old 05-12-2016, 06:53 AM
  #6  
Member
 
FairviewFarm's Avatar
 
Join Date: May 2013
Location: Wisconsin
Posts: 39
Default

Please post a picture or two.
FairviewFarm is offline  
Old 05-12-2016, 06:59 AM
  #7  
Junior Member
 
UncleGravy's Avatar
 
Join Date: Mar 2016
Posts: 181
Default

Originally Posted by ManiacQuilter2 View Post
I am in an apt so I couldn't use that but it works for you, that is terrific. I still use the 1" insulation covered with flannel. It has worked for me for over 15 years.
I use insulation board too, but I really link the idea of magnetic push pins. Do they just hold the batting? And the pieces are held to the batting with 505?
UncleGravy is offline  
Old 05-12-2016, 07:14 AM
  #8  
Super Member
 
Join Date: Apr 2016
Location: Blue Ridge Mountians
Posts: 7,076
Default

a picture would help
Jane Quilter is offline  
Old 05-12-2016, 08:43 AM
  #9  
Super Member
 
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,427
Default

Originally Posted by ManiacQuilter2 View Post
I am in an apt so I couldn't use that but it works for you, that is terrific. I still use the 1" insulation covered with flannel. It has worked for me for over 15 years.
I use the same. If things are a bit heavy or the a/c blows them off, I just stick a pin in them. I've made 2 of them and can put them side by side if I need a larger space. When not being used, they can be stored one in the front of the other or one can go in the other room. I've also used mine for nearly 15 years.
cashs_mom is offline  
Old 05-12-2016, 09:40 AM
  #10  
Senior Member
 
Join Date: May 2015
Posts: 383
Default

Could you please post a pic? thanks!
Neuras is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Susan in Texas
Introduce Yourself
37
11-10-2018 07:34 AM
Hockeyrabbit
Main
6
05-16-2010 06:44 PM
butterflywing
Links and Resources
23
03-29-2010 02:28 AM
dottientx
Main
4
12-03-2009 09:06 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter