|
Freezer Paper Applique' using glue.
7 Attachment(s)
Please be patient with me I have a lot o' picts for this tute, I'll probably have ta post 'em in several different posts. I put a star on the back & Tx on the front of a pot holder. Most o' this tute will focus on the star but I will show a few o' the TX also.
(Mental note: Don't ever Satin Stitch through 5 layers o' fabric & 2 washrags again!) (1) Cut out the shape out o' the freezer paper. (2) Press it ta the wrong side of the fabric. [ATTACH=CONFIG]346267[/ATTACH] (3) Cut out the seam allowance about a 1/4" from the freezer paper. [ATTACH=CONFIG]346269[/ATTACH] [ATTACH=CONFIG]346270[/ATTACH] [ATTACH=CONFIG]346271[/ATTACH] I cut straight across the tip & then clipped the tiny corners. [ATTACH=CONFIG]346272[/ATTACH] [ATTACH=CONFIG]346274[/ATTACH] (I still have quit a few ta post.) Why can't I git rid o' this last pict that goes somewhere else? |
4 Attachment(s)
(4) Clip the curved places & corners o' the star.
(note; don't clip all o' the way ta the paper, just almost.) [ATTACH=CONFIG]346275[/ATTACH] [ATTACH=CONFIG]346276[/ATTACH] [ATTACH=CONFIG]346277[/ATTACH] [ATTACH=CONFIG]346278[/ATTACH] |
(5) Use either Roxanne's Basting Glue or Washable (as in water soluble) School Glue. I actually have the school glue in an old Roxanne's bottle. Put tiny drops o' glue in several places o' the seam allowance.
[ATTACH=CONFIG]346280[/ATTACH] [ATTACH=CONFIG]346280[/ATTACH] [ATTACH=CONFIG]346284[/ATTACH] (6) Carefully fold the very top over the point, & hold it down. [ATTACH=CONFIG]346285[/ATTACH] (7) Then fold the sides on each side over. [ATTACH=CONFIG]346286[/ATTACH] |
(8)As ya git both sides folded over hold 'em tight, & then press the tip.
[ATTACH=CONFIG]346287[/ATTACH] [ATTACH=CONFIG]346288[/ATTACH] [ATTACH=CONFIG]346289[/ATTACH] |
Freezer Paper Applique' using glue.II
3 Attachment(s)
(9)After ya git 2 points glued ya start in the sides. Put tiny dots o' glue on each side then one at the very corner.
[ATTACH=CONFIG]346298[/ATTACH] [ATTACH=CONFIG]346299[/ATTACH] [ATTACH=CONFIG]346300[/ATTACH] Oops I just realized the time & I've got ta go & feed my MIL. I'll be back in a min. |
6 Attachment(s)
(10) Pinch the inside corner of the star w/your thumbnail & press.
[ATTACH=CONFIG]346323[/ATTACH] [ATTACH=CONFIG]346327[/ATTACH] [ATTACH=CONFIG]346328[/ATTACH] Again I can't git rid o' these extra picts. |
5 Attachment(s)
When i printed the TX I forgot ta do it mirror image, so I thought I'd show how ta do it on the right side o' the fabric.
(11) Iron the shape onto the right side o' the paper, & cut out around it about 1/4" all around. [ATTACH=CONFIG]346371[/ATTACH] (12)Clip the seam allowances. [ATTACH=CONFIG]346373[/ATTACH] [ATTACH=CONFIG]346374[/ATTACH] [ATTACH=CONFIG]346375[/ATTACH] [ATTACH=CONFIG]346376[/ATTACH] |
5 Attachment(s)
[ATTACH=CONFIG]346377[/ATTACH]
[ATTACH=CONFIG]346378[/ATTACH] [ATTACH=CONFIG]346379[/ATTACH] [ATTACH=CONFIG]346380[/ATTACH] [ATTACH=CONFIG]346381[/ATTACH] |
6 Attachment(s)
(13) On the back side, in the seam allowance, put some glue, fold over the corners & press.
[ATTACH=CONFIG]346383[/ATTACH] [ATTACH=CONFIG]346384[/ATTACH] [ATTACH=CONFIG]346385[/ATTACH] [ATTACH=CONFIG]346386[/ATTACH] [ATTACH=CONFIG]346388[/ATTACH] |
4 Attachment(s)
(14) Do the next corner, then the in between & press.
[ATTACH=CONFIG]346389[/ATTACH] [ATTACH=CONFIG]346390[/ATTACH] [ATTACH=CONFIG]346391[/ATTACH] [ATTACH=CONFIG]346392[/ATTACH] |
| All times are GMT -8. The time now is 12:01 AM. |