Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
1916 Singer Motor/foot pedal question >

1916 Singer Motor/foot pedal question

1916 Singer Motor/foot pedal question

Old 02-15-2013, 03:20 PM
  #1  
Senior Member
Thread Starter
 
Quercus Rubra's Avatar
 
Join Date: Sep 2012
Location: Mid-Michigan
Posts: 368
Default 1916 Singer Motor/foot pedal question

Hello Y'all!! I have a question that I hope that someone here can help me with.

I was given a "Redeye" 1916 Singer and for the most part I have no problems with "Charlie". The only thing is Charlie has a 1 amp motor (is that the right word?) and the foot pedal that is currently on it is a 1/2 amp. If I use Charlie for any real length of time the footpedal can get extremily HOT!!

I don't know how to fix this and really don't want to give up on Charlie since this would my quilting machine. Any help would be very helpful but I'm hoping for a free or super cheap fix if there is such a critter since I don't have any funds to do a major or even a minor repair bill. I am also looking for any of manuals including one that would tell me about maintence that I would have to do on him.

Could someone please help me. TIA
Tricia
Quercus Rubra is offline  
Old 02-15-2013, 05:46 PM
  #2  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Your machine will have a resistance type foot controller. All resistance type foot controllers will get warm, some get hot. The slower you go, the hotter they will get as the electrical current is dissipated as heat.

You can install a modern resistance or electronic foot controller and that will take care of the problem.

If you sew slow a lot then an electronic controller such as Sew-Classic sells will do the trick.

I have one that I use and it works quite well. The only thing I don't like about it is it's made out of lightweight plastic and there's no substance to it. It has a tendency to scoot all over the place.


Joe
J Miller is offline  
Old 02-15-2013, 05:47 PM
  #3  
Super Member
 
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Default

Hi Quercus,

A foot pedal controller rated for .5 amp is pretty light duty. Safest thing is to get a new controller for $10 or $20. If your near a vintage sewing machine enthusiast they might be able to get you a used controller for cheap or free. Best of Luck.

Jon

Last edited by QuiltnNan; 02-16-2013 at 01:54 PM. Reason: remove advertising
jlhmnj is offline  
Old 02-15-2013, 08:17 PM
  #4  
Senior Member
 
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
Default

Your foot control should be at LEAST the same amperage as your motor...or more.
path49 is offline  
Old 02-16-2013, 01:43 PM
  #5  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Tricia ,
Another thought on your controller. Take the cover or housing off of it and clean it good. Make sure the contacts are clean and the wire connections tight.
Dirt, corrosion, burned contacts all will increase resistance and therefore heat.


Pat,
Just for curiosity sake I checked 3 controllers this morning. An electronic from Sew-Classic was rated at 1.2 amps, and two that came with Japanese machines were rated at 1 amp. The motor on the machine with the 1 amp controller does not list the amps, just the watts, 140.

I have several with motors like this. Is there a conversion method to determine how many amps 140 watts is?


Joe
J Miller is offline  
Old 02-16-2013, 08:37 PM
  #6  
Senior Member
 
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
Default

Joe, I just did a search & found this http://www.ehow.com/how_4925656_convert-watts-amps.html
path49 is offline  
Old 02-17-2013, 05:33 AM
  #7  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Pat,

Thanks for the formula link. I bookmarked it.

Using the 140 Watts and 110 volts that motor comes out at 1.27 Amps.

I'm thinking that most of the motor / controller combos will be similar to this. I'll be checking them for sure just to see.

Joe
J Miller is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SherB
For Vintage & Antique Machine Enthusiasts
11
08-22-2018 06:47 AM
crisscross
For Vintage & Antique Machine Enthusiasts
27
01-28-2016 04:26 PM
cminor
Main
56
05-21-2013 11:16 AM
hazelnut
For Vintage & Antique Machine Enthusiasts
18
11-22-2011 01:34 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter