Can this machine be rescued?
#231
29K58 AKA Barnacle Bill
I picked this up a month or so back and although it was a lot worse than I'd imagined I bought it anyway (very stupid). Turns out that it's something my dad and I can do together. He's enjoying my addiction too
[ATTACH=CONFIG]490307[/ATTACH]
It came with a stand, but I can't find the picture of that right now. I stripped the paint/japan off but it had been sitting outside and near the ocean for 15 years, so every part was rusted. The handwheel had a lot of rust! After paint removal my dad set to work freeing it all up. It's now very very smooth but not yet finished. I'll buy a set of waterslide decals shortly and she'll be ready to take on the world again.
Here's some machine scantiness (I'd removed nearly all the paint):
[ATTACH=CONFIG]490322[/ATTACH]
Since then we've treated the rust and there's some new paint (I'll probably add several more coats to make it like it should be) but the majority of the work was treating the mechanical parts. The manual is available free from Singer, and includes a section "for adjusters and mechanics" which has clear-ish diagrams of how to do just about everything. Very simple machine, and I'm looking forward to testing her out.
[ATTACH=CONFIG]490307[/ATTACH]
It came with a stand, but I can't find the picture of that right now. I stripped the paint/japan off but it had been sitting outside and near the ocean for 15 years, so every part was rusted. The handwheel had a lot of rust! After paint removal my dad set to work freeing it all up. It's now very very smooth but not yet finished. I'll buy a set of waterslide decals shortly and she'll be ready to take on the world again.
Here's some machine scantiness (I'd removed nearly all the paint):
[ATTACH=CONFIG]490322[/ATTACH]
Since then we've treated the rust and there's some new paint (I'll probably add several more coats to make it like it should be) but the majority of the work was treating the mechanical parts. The manual is available free from Singer, and includes a section "for adjusters and mechanics" which has clear-ish diagrams of how to do just about everything. Very simple machine, and I'm looking forward to testing her out.
#232
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
That's quite a project. Good to see your dad likes playing with them too. It's good to share an interest like this and it will keep him busy and out of trouble. I love the look of the 29s, not sure where I would put one but certainly wouldn't turn one down either. I can't wait to see the finished results.
Rodney
Rodney
#234
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
#236
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I just got to meet Cari today. She was really nice. She gifted me an old White Rotary that had spent some quality time outdoors. The finish is shot and it's going to need a complete teardown anyway just to get the rust off so I now have a candidate for a repaint. I haven't had to go too deeply on any of my machines yet so this one will be a really good learning experience. My daughter thinks a hot fuschia pink color would be a good choice. A little bright for my tastes. We'll see.
Rodney
Rodney
#237
Senior Member
Join Date: Apr 2009
Posts: 609
Hey hot pink or purple would look great. The japan finish on this one isn't too bad but the decals are a nice shade of icky silver. New waterslides and a nice polish of the japan and it should look pretty good.
Its funny how things work out. A couple weeks ago I found a really nice cabinet for $20, it came with a Singer Merritt that I'm not sure what I'm going to do with. After a little research I found the machine originally sold with this cabinet was a Singer 66. I've been on the lookout for one but couldn't find one I could even reasonably afford. With all the stuff that went on last week and a few emails back and forth I mentioned I had a stuck up rust bucket that I'd been trying to free up for 6 months. I was asked for a few pictures of a few key locations, I happily supplied these. I figured the answer coming back was that it was a lost cause and its only redeeming quality was it was made of iron and would make a fantastic boat anchor or door stop. Well shortly thereafter the pictures came back with some instructions of what to do and how to do it. My stuck up rust bucket was not a lost cause and with a bit of work would be a great machine. At this point I couldn't even remember what the machine was so I looked it up. Low and behold my stuck up rust bucket is a 66 just like what came in the cabinet I fell in love with. When I get finished I'll have an original machine and cabinet in great shape for less than $50 total. That is including the supplies to make it right again. Things worked out and I didn't even know it.
Its funny how things work out. A couple weeks ago I found a really nice cabinet for $20, it came with a Singer Merritt that I'm not sure what I'm going to do with. After a little research I found the machine originally sold with this cabinet was a Singer 66. I've been on the lookout for one but couldn't find one I could even reasonably afford. With all the stuff that went on last week and a few emails back and forth I mentioned I had a stuck up rust bucket that I'd been trying to free up for 6 months. I was asked for a few pictures of a few key locations, I happily supplied these. I figured the answer coming back was that it was a lost cause and its only redeeming quality was it was made of iron and would make a fantastic boat anchor or door stop. Well shortly thereafter the pictures came back with some instructions of what to do and how to do it. My stuck up rust bucket was not a lost cause and with a bit of work would be a great machine. At this point I couldn't even remember what the machine was so I looked it up. Low and behold my stuck up rust bucket is a 66 just like what came in the cabinet I fell in love with. When I get finished I'll have an original machine and cabinet in great shape for less than $50 total. That is including the supplies to make it right again. Things worked out and I didn't even know it.
Last edited by crocee; 09-04-2014 at 05:33 PM.
#238
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Its funny how things work out. My stuck up rust bucket was not a lost cause and with a bit of work would be a great machine. At this point I couldn't even remember what the machine was so I looked it up. Low and behold my stuck up rust bucket is a 66 just like what came in the cabinet I fell in love with. When I get finished I'll have an original machine and cabinet in great shape for less than $50 total. That is including the supplies to make it right again. Things worked out and I didn't even know it.
Cari
#239
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
I just got to meet Cari today. She was really nice. She gifted me an old White Rotary that had spent some quality time outdoors. The finish is shot and it's going to need a complete teardown anyway just to get the rust off so I now have a candidate for a repaint. I haven't had to go too deeply on any of my machines yet so this one will be a really good learning experience. My daughter thinks a hot fuschia pink color would be a good choice. A little bright for my tastes. We'll see.
Rodney
Rodney
Cari
#240
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I just unloaded mine. I brushed the dirt and spider webs off and put some oil on it, not that it's likely to do much any time soon. This one is stuck solid, including the motor. I need to catch up a couple other projects before I get serious with this one so the oil will have plenty of time to work. It might be a good candidate for the electrolysis tank.
Rodney
Rodney
Thread
Thread Starter
Forum
Replies
Last Post
Qatie
For Vintage & Antique Machine Enthusiasts
21
09-07-2016 06:21 AM
Skeat
General Chit-Chat (non-quilting talk)
4
09-29-2009 07:46 AM