Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Cleaning and repairing the shellac clear coat on vintage sewing mcahines >

Cleaning and repairing the shellac clear coat on vintage sewing mcahines

Cleaning and repairing the shellac clear coat on vintage sewing mcahines

Old 04-18-2012, 05:30 PM
  #1  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default Cleaning and repairing the shellac clear coat on vintage sewing mcahines

Supplies needed: Shellac
Denatured alcohol
Linseed oil (boiled)
Rags (old t-shirts or old tighty whites)

1. Clean the head with you favorite method to remove dirt and grime.
2. Wrap you finger with a couple of layers with the t-shirt.
3. dip finger in alcohol and place a few drops of linseed oil on the finger
4. now start rubbing the bed with light circular motions, add more oil if finger sticks to the finish.

We are now melting the old shellac into a smooth coating trying to eliminate the dull brown spots of old shellac.
5.Now go from left to right in a straight line ligthly lifting the finger and the repeat. you can also go from right to left if you like. Now we are trying to get rid of any swirl marks that were left by the rag.

Stay away of the decals at this time. Cont this tech until you have a smooth finish on the entire head.

When you hav a smooth and clear finish on the head(as clear as it will get and you will know)

6. Now go over the the decals with the same method above very lightly.

7. Let this cure for about a day then with new rag on finger dip it in shellac and place a few drops of oil and with a circular motion go over the decals and the head. Cont. dipping finger in shellac and a few drops of linseed oil and do this over the entire head and decals. this is adding more clean shellac to protect the decals and the japan coating. Always ending in the straight line finishing to get rid of the swirl marks made by the rag.

8. Do this until it looks good to you and smooth and shiny. Let cure for a week and then wax if you want. You favorite brand of wax is okay although it is not needed now.

Please note: I recommend you practice this french polish method on an old machine first so you can get the hang of it. Please do not hesitate to ask questions anytime. I am always here to help.
Glenn is offline  
Old 04-18-2012, 05:43 PM
  #2  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default Before and after treatment

Here you can see the before and after treatment. The last photo is an old used singer oil bottle I load with linseed oil and the little mouthwash bottle is full of denatured alcohol. Makes it easier to but on the finger rag.
Attached Thumbnails shellac-repair-machines-003.jpg   shellac-repair-machines-005.jpg   shellac-repair-machines-006.jpg   shellac-repair-machines-004.jpg  
Glenn is offline  
Old 04-18-2012, 05:55 PM
  #3  
Super Member
 
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Default

Thank you, Glenn, for putting this in one thread.
irishrose is offline  
Old 04-18-2012, 06:08 PM
  #4  
Senior Member
 
Bennett's Avatar
 
Join Date: Jul 2011
Location: North TX
Posts: 764
Default

Thanks for the info! This was probably asked before, but I am assuming the linseed oil is to keep the shellac from drying too quickly and give you more working time? This sounds very much like what I've done with a couple of pieces of furniture to "revive" the shellac finish.
Bennett is offline  
Old 04-18-2012, 06:12 PM
  #5  
Super Member
 
AZ Jane's Avatar
 
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 2,877
Default

I have a little FW with some of the decals already rubbed off. Would you recommend this method?
AZ Jane is offline  
Old 04-18-2012, 06:15 PM
  #6  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by Bennett View Post
Thanks for the info! This was probably asked before, but I am assuming the linseed oil is to keep the shellac from drying too quickly and give you more working time? This sounds very much like what I've done with a couple of pieces of furniture to "revive" the shellac finish.
Yes you are correct the oil gives you more working time and to prevent the rag from sticking to the finish. It is the same tech we use when restoring furniture and French polishing finish.
Glenn is offline  
Old 04-18-2012, 06:17 PM
  #7  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by AZ Jane View Post
I have a little FW with some of the decals already rubbed off. Would you recommend this method?
This method will not restore the missing decals but will protect the decals that are left. I recommend this on any vintage machine to improve the appearance.
Glenn is offline  
Old 04-18-2012, 06:30 PM
  #8  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

You may want to add naptha or lighter fluid to the supplies. The naptha is used to wipe the the head to get rid of any oil or cleaning agents used to get the dirt off. Just one wipe down with naptha and a clean rag will do it.
Skip
Glenn is offline  
Old 04-18-2012, 06:36 PM
  #9  
Power Poster
 
Join Date: Jun 2009
Location: Perth, Western Australia
Posts: 10,357
Default

My machine has precious little of the decorative decals left....is it madness to completely strip them off? I am not intending to re-sell or anything...
earthwalker is offline  
Old 04-18-2012, 06:41 PM
  #10  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by earthwalker View Post
My machine has precious little of the decorative decals left....is it madness to completely strip them off? I am not intending to re-sell or anything...
This is a matter of personal choice, I would not if it was my choice. I would just clean it up and use it like it is.
Glenn is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
712
12-02-2023 10:04 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Debbie C
General Chit-Chat (non-quilting talk)
9
04-28-2015 05:58 PM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter