Cleaning and repairing the shellac clear coat on vintage sewing mcahines
04-24-2012, 11:44 AM
#51
Member
Join Date: Apr 2012
Posts: 6
I have a question. I have a 1952 singer 201 that I have recently brought back from our other house. In my enthusiaum to clean it, I have removed what I assume to be the shellac. So now is it better to remove the rest of it or to do as the tutorial here in this forum suggests? I only ask because I saw directions on how to remove it and wondered if it was better to remove it and start over or just start with what little is left? Any thoughts would be appreciated.
04-24-2012, 03:14 PM
#52
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Originally Posted by CynthiaG
I have a question. I have a 1952 singer 201 that I have recently brought back from our other house. In my enthusiaum to clean it, I have removed what I assume to be the shellac. So now is it better to remove the rest of it or to do as the tutorial here in this forum suggests? I only ask because I saw directions on how to remove it and wondered if it was better to remove it and start over or just start with what little is left? Any thoughts would be appreciated.
04-24-2012, 06:33 PM
#53
Member
Join Date: Apr 2012
Location: Seattle
Posts: 15
Thank you Glenn! I just spent some time reading up on shellac and am going to try your tutorial method.
Shellac is an animal product, a resin secreted from the Coccus lacca (lac beetle), a scale that feeds on certain trees in India and southern Asia.After hatching, the nifty little bug snoops around for a place to eat, selecting a stem or leaf as its breakfast counter. It has a sharp teensy beak, and it uses that to puncture the tissue of the plant, and settle in for a lifetime of sucking nourishment.
After feeding, the insect secretes a resin, which dries and hardens into a protective covering called lac. The lac is collected, crushed, washed, and dried. After cleaning and heating, it is drawn into thin sheets of finished shellac.
The level of refinement, the timing of harvest, and source of the lac, determine the specification color that comes to you, the happy woodworker.
Something kind of magical about spreading bug juice on a sewing machine too!
Shellac is an animal product, a resin secreted from the Coccus lacca (lac beetle), a scale that feeds on certain trees in India and southern Asia.After hatching, the nifty little bug snoops around for a place to eat, selecting a stem or leaf as its breakfast counter. It has a sharp teensy beak, and it uses that to puncture the tissue of the plant, and settle in for a lifetime of sucking nourishment.
After feeding, the insect secretes a resin, which dries and hardens into a protective covering called lac. The lac is collected, crushed, washed, and dried. After cleaning and heating, it is drawn into thin sheets of finished shellac.
The level of refinement, the timing of harvest, and source of the lac, determine the specification color that comes to you, the happy woodworker.
Something kind of magical about spreading bug juice on a sewing machine too!
04-24-2012, 06:41 PM
#54
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Shellac is a green product and glad you spent some time learning about it. It has been used in the the furniture industry for centuries and is use in antique restoration. BTW did you know it is food safe after curing and used on salad bowls etc.
04-25-2012, 08:39 AM
#55
Member
Join Date: Apr 2012
Posts: 6
Originally Posted by Glenn
No you don't have to remove all the shellac. you can add more and even out the finsih by using the istructions in the thread I started.
Thank you, I should have left it alone. Hopefully I can semi-repair the damage and make her beautiful again.
12-15-2012, 07:39 AM
#57
Junior Member
Join Date: Oct 2012
Location: Warwickshire, UK
Posts: 168
Thank you Glenn for this tutorial.
I recently homed a 111 year old 28k who was quite dirty, I cleaned her up with sewing machine oil until she looked respectable again and then I waxed her - oh no! disaster! I used the same wax (Simoniz car wax) that I used on a 201k and 99k with good results on both, I even did a test patch on the 28k which looked good too, then I whacked on the wax all over and within minutes most of the machine looked like it was covered in a dark brown fine crackle glaze, I was gutted. I decided to give her up and popped her into the garage so that she was out of sight, then I re-read your tutorial and realised I had a chance to put right my mistake. I am delighted with the results and would never have believed I could have done it (well I couldn't have done it without your help) she looks lovely again. I've also cleaned up her case using your wood recipe and tutorial. Now I just have to keep my hands off her for a week while she cures.
Clare
I recently homed a 111 year old 28k who was quite dirty, I cleaned her up with sewing machine oil until she looked respectable again and then I waxed her - oh no! disaster! I used the same wax (Simoniz car wax) that I used on a 201k and 99k with good results on both, I even did a test patch on the 28k which looked good too, then I whacked on the wax all over and within minutes most of the machine looked like it was covered in a dark brown fine crackle glaze, I was gutted. I decided to give her up and popped her into the garage so that she was out of sight, then I re-read your tutorial and realised I had a chance to put right my mistake. I am delighted with the results and would never have believed I could have done it (well I couldn't have done it without your help) she looks lovely again. I've also cleaned up her case using your wood recipe and tutorial. Now I just have to keep my hands off her for a week while she cures.
Clare
12-16-2012, 06:39 AM
#58
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Originally Posted by Littlebearquiltingboard
Thank you Glenn for this tutorial.
I recently homed a 111 year old 28k who was quite dirty, I cleaned her up with sewing machine oil until she looked respectable again and then I waxed her - oh no! disaster! I used the same wax (Simoniz car wax) that I used on a 201k and 99k with good results on both, I even did a test patch on the 28k which looked good too, then I whacked on the wax all over and within minutes most of the machine looked like it was covered in a dark brown fine crackle glaze, I was gutted. I decided to give her up and popped her into the garage so that she was out of sight, then I re-read your tutorial and realised I had a chance to put right my mistake. I am delighted with the results and would never have believed I could have done it (well I couldn't have done it without your help) she looks lovely again. I've also cleaned up her case using your wood recipe and tutorial. Now I just have to keep my hands off her for a week while she cures.
Clare
I recently homed a 111 year old 28k who was quite dirty, I cleaned her up with sewing machine oil until she looked respectable again and then I waxed her - oh no! disaster! I used the same wax (Simoniz car wax) that I used on a 201k and 99k with good results on both, I even did a test patch on the 28k which looked good too, then I whacked on the wax all over and within minutes most of the machine looked like it was covered in a dark brown fine crackle glaze, I was gutted. I decided to give her up and popped her into the garage so that she was out of sight, then I re-read your tutorial and realised I had a chance to put right my mistake. I am delighted with the results and would never have believed I could have done it (well I couldn't have done it without your help) she looks lovely again. I've also cleaned up her case using your wood recipe and tutorial. Now I just have to keep my hands off her for a week while she cures.
Clare
Nancy
12-16-2012, 07:51 PM
#60
Junior Member
Join Date: Aug 2011
Location: Elkhart IN
Posts: 226
Thank you for this information and for the photos! I have been desperately searching for a way to clean up my White Rotary. Some of the decals have already been silvered and I want to preserve the rest. I will try this!
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
714
04-15-2024 05:25 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM
