FMQ using vintage/antique machines.
#1
FMQ using vintage/antique machines.
Hello to all,
Having collected machine and as of January this year started using them for quilting, I have a question on FMQ. I am putting the finishing touches of a third quilt for the Murphy bed that is also near completion for my granddaughter. I am also attaching the backing on 4 French Bread table runner and may employ FMQ on them. I fabricated a dog cover plate that seems that it may work on all my Singers and with a further refinement will fit on my late 1800's Standard treadle. What do those of you that do FMQ think of my cover plate? Will it work or do you see a problem?? Any info is greatly appreciated.
Thanks
Rodney in Ponchatoula, La.
Having collected machine and as of January this year started using them for quilting, I have a question on FMQ. I am putting the finishing touches of a third quilt for the Murphy bed that is also near completion for my granddaughter. I am also attaching the backing on 4 French Bread table runner and may employ FMQ on them. I fabricated a dog cover plate that seems that it may work on all my Singers and with a further refinement will fit on my late 1800's Standard treadle. What do those of you that do FMQ think of my cover plate? Will it work or do you see a problem?? Any info is greatly appreciated.
Thanks
Rodney in Ponchatoula, La.
#2
The only problem I have encountered using a cover plate - was that the clearance of the hopping foot at full "hop" was decreased by about half, and it interfered with easy motion of the fabric, particularly over seams. Ticked me off enough I only did a bit before I switched over to the 301. On my 15 - the foot is about 3/16" off the bed at it's highest "hop" and with the cover plate I was using (think it was a Singer 328) it cut it down to under 1/8" and that wasn't enough.
Since I was doing it just to see how the machine would handle it, I wasn't willing to modify the foot to see if I could get more height out of it.
Since I was doing it just to see how the machine would handle it, I wasn't willing to modify the foot to see if I could get more height out of it.
#3
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
You don't "have" to cover or drop the feed dogs for fm work. I don't and have never had a problem. I just lessen the presser foot pressure and set the stitch length to zero. on one machine I have I don't even use a hopping foot I just use the regular ss foot. Originally those covers for the old machines were made for darning, which covers a much smaller area and you would generally move the piece much slower so the issue Cathy mentioned wouldn't really be that much of an issue.
I think if it works for you though, then it's a great idea.
Cari
I think if it works for you though, then it's a great idea.
Cari
#4
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
You don't "have" to cover or drop the feed dogs for fm work. I don't and have never had a problem. I just lessen the presser foot pressure and set the stitch length to zero. on one machine I have I don't even use a hopping foot I just use the regular ss foot. Originally those covers for the old machines were made for darning, which covers a much smaller area and you would generally move the piece much slower so the issue Cathy mentioned wouldn't really be that much of an issue.
I think if it works for you though, then it's a great idea.
Cari
I think if it works for you though, then it's a great idea.
Cari
#6
Super Member
Join Date: Jul 2013
Location: Tri-Cities, WA
Posts: 1,063
I am afraid that it is too thick, and would interfere with the smooth movement of the fabric under the presser foot. The old-fashioned solution was to tape a business card over the feed dogs, but I've FMQ'd without covering the feed dogs, like Cari and Candace have. It wasn't easy, though - my mom's vintage Singer (mid-70's?) just doesn't have much room between the needle and the plate - could only do very thin blocks.
#7
CD in Oklahoma
#8
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Cari
#9
Super Member
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
MUV (Lizzie Lenard) has a video on her blog that shows her fmq on her old machine using plastic wrap to cover the bed of the machine. I have forgotten what she does about the feed dogs but it would probably be a good video to watch. Personally, I love the ingenuity you put forth to conjure up and manufacture a cover plate but from the looks of the photo, it appears that your quilt might get hung up on the raised edges of the cover. Maybe not, so guess you would have to try it first to see how you do.
Here is her video in case you want to watch it (maybe you have seen it already?):
https://www.youtube.com/watch?v=xkXJ...eZc5g1DU4tdM9A
Here is her video in case you want to watch it (maybe you have seen it already?):
https://www.youtube.com/watch?v=xkXJ...eZc5g1DU4tdM9A
Thread
Thread Starter
Forum
Replies
Last Post
jljack
For Vintage & Antique Machine Enthusiasts
18
03-15-2012 08:28 AM
butterflywing
Links and Resources
1
05-26-2011 06:34 PM
butterflywing
Links and Resources
0
05-26-2011 11:56 AM
Charlee
For Vintage & Antique Machine Enthusiasts
10
06-17-2010 07:00 PM