Found Treasure
#11
Super Member
Join Date: Feb 2012
Posts: 8,091
All the info I have about them came from Jenny at Sew-Classic. She told me the foot controller should be rated for the same or more amps as the motor. I have two foot controllers that are rated below the motors on my machines and I haven't used them. She couldn't tell me what problems I'd have, but that the higher amp motors might ruin the controllers.
That's pretty much what I know. If you wired in that controller it might answer the question for us.
Joe
That's pretty much what I know. If you wired in that controller it might answer the question for us.
Joe
#12
I had to update my own post!! I happened!! I did come across a Singer 99 while dropping off a bag to Goodwill last night. I had NO idea I'd walk out with a beauty...my Bella.
#14
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Harrisonburg, VA
Posts: 167
#15
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Harrisonburg, VA
Posts: 167
I'm not concerned about ruining the controller but I don't want to mess up the motor. So if it won't mess up the motor I think I'm going to try to wire up the foot controller when the cord set box comes in. I will try to let you know how it works out.
T Good
T Good
#16
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Harrisonburg, VA
Posts: 167
All the info I have about them came from Jenny at Sew-Classic. She told me the foot controller should be rated for the same or more amps as the motor. I have two foot controllers that are rated below the motors on my machines and I haven't used them. She couldn't tell me what problems I'd have, but that the higher amp motors might ruin the controllers.
That's pretty much what I know. If you wired in that controller it might answer the question for us.
Joe
That's pretty much what I know. If you wired in that controller it might answer the question for us.
Joe
T