FW foot control

Old 01-16-2013, 09:43 AM
  #1  
Senior Member
Thread Starter
 
Join Date: Mar 2010
Location: Arkansas
Posts: 420
Default FW foot control

I have a question for other FW owners. Does your foot control get hot while you are using it? Or do I have a problem? Just noticed it yesterday. I think I'm going to make a storage glove for it and put the ironing silver inside it. It was really hot! Bobbie
grannysewer is offline  
Old 01-16-2013, 09:48 AM
  #2  
Senior Member
 
Spudgm's Avatar
 
Join Date: Jun 2008
Location: Idaho
Posts: 329
Default

I do not own a FW but if your foot pedal is getting that hot I would be concerned about fire and also possible damage to your machine.
Spudgm is offline  
Old 01-16-2013, 10:07 AM
  #3  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Yes, they do get warm / hot. They work by reducing the voltage to the motor by resistance. Some like the Singers use a carbon pile, others use wire resisters. Either way the slower you go the more the voltage is reduced. This voltage has to go somewhere so it's dissipated as heat. Some controllers get hotter than others.

I have some I can't sew slow on without a shoe. Others are fine. I think it's age and use that contributes to them getting hot.
I also use one of those silicone iron pads under the controller on a carpeted floor.

As for damaging the machine, don't worry about that, the controller is doing what it's supposed to.

Joe
J Miller is offline  
Old 01-16-2013, 11:41 AM
  #4  
Senior Member
Thread Starter
 
Join Date: Mar 2010
Location: Arkansas
Posts: 420
Default

Originally Posted by J Miller View Post
Yes, they do get warm / hot. They work by reducing the voltage to the motor by resistance. Some like the Singers use a carbon pile, others use wire resisters. Either way the slower you go the more the voltage is reduced. This voltage has to go somewhere so it's dissipated as heat. Some controllers get hotter than others.

I have some I can't sew slow on without a shoe. Others are fine. I think it's age and use that contributes to them getting hot.
I also use one of those silicone iron pads under the controller on a carpeted floor.

As for damaging the machine, don't worry about that, the controller is doing what it's supposed to.

Joe
Thanks Joe, that eases my mind. I was sewing rather fast yesterday to get finished.
grannysewer is offline  
Old 01-16-2013, 11:57 AM
  #5  
Super Member
 
Join Date: Mar 2012
Location: Southeast Georgia
Posts: 2,526
Default

Joe, I'm glad you answered that. I was getting ready to order new foot pedals for mine. Thanks, as usual, for your great answers.
MimiBug123 is offline  
Old 01-16-2013, 02:01 PM
  #6  
Senior Member
 
vanginney's Avatar
 
Join Date: Aug 2012
Location: Saskatchewan
Posts: 351
Default

I still make sure all my vintage machine are unplugged from the wall. My OCD mind would not be able to sleep otherwise. I think I was also using my petal backwards when I first used it and noticed the heat.
vanginney is offline  
Old 01-16-2013, 04:02 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Mar 2010
Location: Arkansas
Posts: 420
Default

Originally Posted by vanginney View Post
I still make sure all my vintage machine are unplugged from the wall. My OCD mind would not be able to sleep otherwise. I think I was also using my petal backwards when I first used it and noticed the heat.
Oh, me too. I normally sew barefoot, but yesterday I had on shoes and didn't notice it until I got ready to leave my DD. I always unplug, just to be safe. The machines are on surge protectors.
grannysewer is offline  
Old 01-16-2013, 07:19 PM
  #8  
Senior Member
 
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
Default

The rule of thumb is NEVER leave a rheostat foot controller plugged in unless you are using it...they do get hot and for safety sake it is better that you unplug them. I agree with Joe that they are safe, unless of course you smell smoke like my willcox foot controller.
DanofNJ is offline  
Old 01-17-2013, 09:56 AM
  #9  
Super Member
 
Join Date: Mar 2012
Location: Southeast Georgia
Posts: 2,526
Default

I have mine plugged into a surge protector and turn the power to it off when I finish sewing. Should I still unplug them each time?
MimiBug123 is offline  
Old 01-18-2013, 10:08 AM
  #10  
Power Poster
 
Join Date: Aug 2011
Location: Citrus County, Florida
Posts: 10,849
Default

Mine gets a bit warm during use
solstice3 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Icandothat
Main
17
03-29-2010 01:20 PM
stitchinMamaw
Main
41
11-27-2009 06:10 PM
Flying_V_Goddess
Main
16
08-27-2008 02:38 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter