Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
How do I remove a stuck gib screw on a FW? >

How do I remove a stuck gib screw on a FW?

How do I remove a stuck gib screw on a FW?

Old 04-23-2013, 04:41 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: NE Wisconsin
Posts: 218
Default How do I remove a stuck gib screw on a FW?

I gave my 1951 Featherweight to my older daughter who wanted to learn to quilt, and she's hooked! I greased and oiled the machine before she got it and it ran like a top. Then it developed the dreaded stitch lock. In attempting to remove the bobbin assembly to check for a stuck thread, I discovered that I can't remove the gib screw. I've included a picture of the problem screw (that's not my machine--mine is in much better shape). My DH has tried WD40, wait time, and his best Craftsman screwdrivers, but no luck. The screw won't budge. We finally took it in to the shop where the SMG admired the FW's overall condition and then said he'd try to get the screw out, but he may not be able to. Anyone here have any suggestions?

I tried to post a photo from my iPad, but I've never done this before, sorry.



Last edited by Mimiqwerty; 04-23-2013 at 04:52 PM.
Mimiqwerty is offline  
Old 04-23-2013, 05:25 PM
  #2  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,431
Default

To post from your iPad, first take the picture with it and it goes to your albums. Go to quiltingboard and open a new thread. Type in the title and text. Clck on the little paper clip that is for manage attachments in the icon boxes. It will prompt you to choose from existing pictures. Click on that and it will bring you to your camera roll. Click on the picture you want and it will ask you to upload it. Click upload and go back to your text. If the text has disappeared click on the restore content at the bottom of the text box. You will not "see" your picture until AFTER you click submit.
For putting a picture in an existing thread, just click on the tiny tree icon on the top (3rd from right)of the quick reply box and follow the prompts.
Tartan is offline  
Old 04-23-2013, 05:42 PM
  #3  
Senior Member
 
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
Default

I like Breakfree sold at gun shops...it may take a few days to free up but it eventually will in my experience.
DanofNJ is offline  
Old 04-23-2013, 06:38 PM
  #4  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: NE Wisconsin
Posts: 218
Default

Tartan, Thanks for the instructions, but neither works. Whenever I click on the paper clip or the tree, the "upload file" is gray and I can't access it. Not sure what I'm doing wrong as I have the picture in my camera roll. I really appreciate your help and I'll keep trying.
Mimiqwerty is offline  
Old 04-23-2013, 06:41 PM
  #5  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: NE Wisconsin
Posts: 218
Default

Originally Posted by DanofNJ View Post
I like Breakfree sold at gun shops...it may take a few days to free up but it eventually will in my experience.
Thanks. I'll get some tomorrow.
Mimiqwerty is offline  
Old 04-23-2013, 07:21 PM
  #6  
Member
 
Join Date: Mar 2013
Location: Stanwood, Wa.
Posts: 59
Default

Heat from a hair dryer and light tapping while it's marinating may help as well.
Noel is offline  
Old 04-23-2013, 07:46 PM
  #7  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: NE Wisconsin
Posts: 218
Default

Thanks Noel. Sounds like good advice. I'll just have to be patient with it. In the meantime, my daughter is using my old Kenmore 158. She likes that one, too.
Mimiqwerty is offline  
Old 04-23-2013, 07:55 PM
  #8  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Liquid Wrench has usually done the deed for me.
Candace is offline  
Old 04-24-2013, 03:25 AM
  #9  
Super Member
 
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Default

This is how I did it.

I stood my FW up on end...protected from tipping over with some stacks of books. I applied a drop of Liquid Wrench to the screw and then let it soak in for several hours--still leaving the machine in the upright position.

Every few hours I added another drop of LW and then let it set overnight. It took awhile but it finally came out.

I had to do the same thing to the gib, itself, as it wouldn't swing out as it's supposed to.

I tried the heat from the hairdrier but the heat blowing onto the LW made a spark!!!

After I took the tiny gib screw out I taped it to a piece of paper and then placed the paper in a baggie....just so no one would accidently throw it out.
cabbagepatchkid is offline  
Old 04-25-2013, 05:34 AM
  #10  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: NE Wisconsin
Posts: 218
Default

Great news! Thanks to all your suggestions and advice, the gib screw has been successfully removed. It took time, Liquid Wrench, and very light tapping. As suspected, there was a thread caught in the works.


Thanks again for all the help. This board is an unending source of fabulous knowledge, freely given.
Mimiqwerty is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mizzannie
For Vintage & Antique Machine Enthusiasts
6
04-02-2017 09:57 AM
lakekids
For Vintage & Antique Machine Enthusiasts
4
07-16-2013 07:44 AM
Quiltgranny
Main
12
04-06-2011 08:12 AM
sabrinaquilts
Main
24
08-19-2010 03:18 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter