Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
How to start treadling in the right direction >

How to start treadling in the right direction

How to start treadling in the right direction

Old 01-26-2012, 09:48 AM
  #1  
Super Member
Thread Starter
 
Join Date: Oct 2010
Location: Saratoga, Arkansas
Posts: 1,909
Default How to start treadling in the right direction

I'm having a hard time learning to start treadling in the forward direction. Is there a right position for the treadle to be in or a certain way/order to use my feet? Whatever I'm doing makes the sewing go in reverse. If any of you have some tips or techniques you use to smoothly start sewing on your treadle, please share them with me.

Thanks, jean
jeanharville is offline  
Old 01-26-2012, 11:40 AM
  #2  
Member
 
Join Date: Nov 2011
Posts: 6
Default

Take a hold of the wheel- beside you, pull it forward. Not the treadle wheel, The wheel will be felt by the feet, the direction of the forward thrust to rock the peddle. It is easer to use both feet. I'm speaking from memory, I learned on a treadle. At 13 brings back memories. Theresse
Theresse J is offline  
Old 01-27-2012, 09:28 AM
  #3  
Super Member
Thread Starter
 
Join Date: Oct 2010
Location: Saratoga, Arkansas
Posts: 1,909
Default

Theresse, your advice has helped a lot. I'm still having trouble starting from a dead stop. I'm trying to fingure out if there is an optimal position to leave the treadle so that the next start will be easier. If any of you who treadle often have and tips they would be greatly appreciated. I am continuing to practice with no thread in the bobbin or top. I'm determined to master this. Thanks for any help.
jean
jeanharville is offline  
Old 01-27-2012, 09:49 AM
  #4  
Moderator
 
Join Date: Mar 2008
Location: North East Lower peninsula of Michigan
Posts: 6,230
Default

To start again you have to remember the whyat your machine goes some you pull the wheel towards you some push it away from you once you get it it is easy.
__________________
Up North is offline  
Old 01-27-2012, 10:05 AM
  #5  
Super Member
Thread Starter
 
Join Date: Oct 2010
Location: Saratoga, Arkansas
Posts: 1,909
Default

Up North, thanks for the encouraging words. I am getting a little smoother and am paying close attention to the treadle. I have another question. It seems like the treadle might be a little tight. Do I need to tighten the belt or loosen it?
jeanharville is offline  
Old 01-27-2012, 10:10 AM
  #6  
Moderator
 
Join Date: Mar 2008
Location: North East Lower peninsula of Michigan
Posts: 6,230
Default

If it is tight I would think you have to loosen it a bit
__________________
Up North is offline  
Old 01-27-2012, 10:56 AM
  #7  
Super Member
 
misseva's Avatar
 
Join Date: Jul 2010
Location: East Arkansas
Posts: 2,534
Default

I was having trouble until I changed from my 'rocker' type tennis shoew to my slip on house shoes. I think the heel was too high for me to treadle. Made a big difference when I went to flat soled shoes. And I always start out turning the hand wheel todard me.
misseva is offline  
Old 01-27-2012, 12:03 PM
  #8  
Super Member
Thread Starter
 
Join Date: Oct 2010
Location: Saratoga, Arkansas
Posts: 1,909
Default

Well, I hate to admit to being an idiot, but the reason the treadle felt a little tight was that I had the bobbin winder engaged. As soon as I released it, the treadle worked great. I've always thought I was born about 100 years too late, but I doubt that I could have managed all the manual dexterity those times called for; not to mention the heavy hard work. But I do sometimes day-dream about quilting bees and church "dinners on the ground". I can barely remember them. But those were still happening in the 40s in rural Arkansas where I was raised.
jeanharville is offline  
Old 01-27-2012, 12:08 PM
  #9  
Super Member
Thread Starter
 
Join Date: Oct 2010
Location: Saratoga, Arkansas
Posts: 1,909
Default

Misseva, your right about the shoes. I first had on tennis shoes. I took those off and just used bare feet and I could feel the relationship between the hand wheel on top and the treadle below thanks to theresse's advice. But that was cold and a little uncomfortable, so I slipped my house shoes on and that seems to work OK. Thanks for mentioning it.
jeanharville is offline  
Old 01-27-2012, 12:12 PM
  #10  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

I does treadle easier with the bobbin winder away from the wheel. I always start the motion with a push/pull of the hand wheel to start the right motion. I keep the toe of my left foot on the front of the treadle shelf and part of my right foot at the top or back of the shelf. Once you get the motion down you can make it fly. Good luck and keep treadling!
Tartan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KenZ
For Vintage & Antique Machine Enthusiasts
18
04-06-2015 07:47 PM
pinkCastleDH
For Vintage & Antique Machine Enthusiasts
37
11-04-2012 04:30 AM
Mom3
For Vintage & Antique Machine Enthusiasts
19
02-23-2012 11:02 AM
Treadle_Boots
For Vintage & Antique Machine Enthusiasts
21
12-21-2011 07:03 AM
Pzazz
Main
8
01-30-2010 06:16 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter