Is this a 27?
09-09-2013, 07:07 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Calif. Desert
Posts: 239
Is this a 27?
I just got this old girl. Singer said it was a 27 but their book on 27/28 shows a high mounted bobbin winder. If it is a 27 is it a 27-something???? Hope some of you folks can give me some help. May take me a little while to get it clean! Spins over nicely already! Ethel
09-09-2013, 07:22 PM
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Ethel,
The 27 has the bobbin winder mounted low, the 127 has it mounted high.
There might be other small differences too, but that's how I tell the difference between them.
This is a 127 ( my machine ):
[ATTACH=CONFIG]435082[/ATTACH]
Notice the position of the bobbin winder.
The 28 / 128 is the same, but smaller. It's a 3/4 size machine.
Joe
The 27 has the bobbin winder mounted low, the 127 has it mounted high.
There might be other small differences too, but that's how I tell the difference between them.
This is a 127 ( my machine ):
[ATTACH=CONFIG]435082[/ATTACH]
Notice the position of the bobbin winder.
The 28 / 128 is the same, but smaller. It's a 3/4 size machine.
Joe
09-10-2013, 04:50 AM
#4
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
