Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
My Featherweight is trying to kill me! >

My Featherweight is trying to kill me!

My Featherweight is trying to kill me!

Old 01-29-2012, 09:01 PM
  #1  
Member
Thread Starter
 
Join Date: Jan 2012
Posts: 18
Default My Featherweight is trying to kill me!

I have a ~1935 Featherweight I have had since 1996. I haven't used it for several years (probably 8-- maybe more) but recently got it out again and made a "shocking" discovery.

At first I though I had stuck my wrist with a pin. Ow! Then I let my daughter stitch a line (I was teaching her) and she complained that the bed of the machine scratched her left wrist . Hmmmm....

I tried stitching again, no pain at first and then-- there it was again!

Then I noticed that when I had both shoes off, (bare feet on tiled floor) or one foot tucked under me, my wrist stung when I sewed. When I slipped at least one (rubber soled) shoe on and kept that foot on the floor-- no pain!

Well, those of you smarter than I am have already figured it out, I'm sure--- my machine was shocking me! It never did this before! Does anyone have any ideas what the problem might be? DH is a fixit type, and if it's something relatively simple like an unshielded power cord or something, he can fix it. If it may be something inside, he won't touch it because , in his words, "if I mess up your Featherweight, I know you'll divorce me!"

Any ideas? There are VERY few places in my neck of the woods to get ANY sewing machine fixed-- much less my precious! (It was made the day my mother was born and I found it and bought it for a ridiculously low price 2 days after she passed away.)
JamieQ is offline  
Old 01-29-2012, 11:05 PM
  #2  
Super Member
 
Join Date: Aug 2009
Location: Martinsville, Indiana
Posts: 1,430
Default

Your machine is very special for two very good reasons. You need to inspect your wiring and see if it's OK. Sew-classic has some things you might read on it:

http://blog.sew-classic.com/categori...ne-repair.aspx

And you can google 'rewiring a featherweight' and see what you can find out about it. There are probably some videos on how to do it.
Good luck. I want to know what you find out.
Janis
You could try PM'ing lostn51 (Billy), Glen, or some of the others you find on the vintage machine site and ask them.
Janis is offline  
Old 01-30-2012, 05:33 AM
  #3  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

I agree, look on line for info and Sew classic may have some wires and info - I don't know where you are living but there may be someplace close to you that could get it done and returned in a reasonable amount of time.
miriam is offline  
Old 01-30-2012, 05:39 AM
  #4  
Super Member
 
abdconsultant's Avatar
 
Join Date: Oct 2010
Location: Western North Carolina
Posts: 2,916
Default

Go to 221parts.com and order a new cord. $12.00 approx. and your hubby can change it out.
abdconsultant is offline  
Old 01-30-2012, 05:52 AM
  #5  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Originally Posted by abdconsultant View Post
Go to 221parts.com and order a new cord. $12.00 approx. and your hubby can change it out.
It could be internal as well - use caution in any case
miriam is offline  
Old 01-30-2012, 07:22 AM
  #6  
Senior Member
 
Join Date: Sep 2010
Location: Asheboro(Farmer), North Carolina
Posts: 653
Default

use caution!
Cacklinghen is offline  
Old 01-30-2012, 09:58 AM
  #7  
Super Member
 
KatFish's Avatar
 
Join Date: Mar 2010
Location: Indiana
Posts: 2,062
Default

I had the same problem with my feather weight. DH checked the wiring but we couldn't find anything. I replaced the foot peddle and it took care of my shocking problem.
KatFish is offline  
Old 01-30-2012, 10:22 AM
  #8  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

replacing the wiring is an easy fix - you can also have the internal wires tested by someone who knows electric.
miriam is offline  
Old 01-30-2012, 12:08 PM
  #9  
Senior Member
 
Join Date: Oct 2011
Location: Middle Tennessee
Posts: 360
Default

It is called a voltage leak. There is electricity feeding back through the machine from a short. Don't use it until it is fixed. Replacement parts are indeed cheaper than postage to a reputable shop. If you have an electric tester, check the machine at various places where it may be leaking from poor or cracked insulation. Your husband can do that without removing parts, only inspection ports etc. THen you will know if it is from the foot controller or the machine itself. It can be visible on FWs. The wiring doesn't age as gracefully as the machines. It was made froml rather primitive formulations of rubber.
You don't find many lamp cords of that age that haven't been replaced. Just remember or number the terminals when he replaces the cord, if needed. If he is as handy as you say, he already knows this. Take pictures and post them to Billy and he can advise you if it needs to be shipped for repair though.
DonnaQuilts is offline  
Old 01-31-2012, 07:02 AM
  #10  
Senior Member
 
Join Date: May 2008
Location: toronto
Posts: 824
Default

I would get it rewired right away. Perhaps you could do it yourself.
glorcour is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
reevesfarm
Main
83
10-05-2011 03:56 AM
sunnyhope
Main
54
06-29-2011 02:35 AM
Mrs. Mel
Pictures
32
02-14-2011 08:38 PM
Hosta
General Chit-Chat (non-quilting talk)
10
12-29-2010 04:27 PM
gail-r
General Chit-Chat (non-quilting talk)
167
06-22-2010 01:14 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter