Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
'New' Kenmore and an appeal for help! >

'New' Kenmore and an appeal for help!

'New' Kenmore and an appeal for help!

Old 12-21-2014, 06:30 PM
  #1  
Member
Thread Starter
 
Join Date: Jun 2014
Location: NY, USA. Originally Birmingham, UK
Posts: 85
Default 'New' Kenmore and an appeal for help!

(If you would like to read my appeal for help with this machine without reading through the boring story, please scroll down to the end)


I love my Kenmore model 84, but I have been keeping my eye out for a more 'modern' machine that has built-in cams and can use attachments such as the monogrammer.

The sweet spot that I was looking for was a machine that was new enough to take attachments, but old enough to be of all-metal construction.

Last weekend, I spotted what appeared to be a plastic sewing machine case in a thrift store.

I dashed in, and watched in horror as a guy picked it up and walked away with it.

He then appeared to change his mind, and put it back.
I shot over and grabbed it, and was delighted to see that, not only did it have built-in cams, but it also had the drive peg for powered accessories.

It was a Kenmore 158.14301 in like-new condition (apart from the outside of the case, which was a bit grimy)

I was doubly delighted when I saw the price: $16.00!

I nearly fell over when I saw that the store was holding a 50% off sale, and I only had to pay $8!

I got the machine home, and discovered that all was not well.
The machine ran, but the belt slipped at the slightest hint of resistance.

I looked into the underside of the machine, and found the motor tension adjustment bolt on the
motor bracket.

I figured that the belt had probably stretched over time, so I loosened the bolt and moved the motor a little to increase the tension on the belt.
This improved things somewhat, but the belt still slipped.

I figured out how to take the side cover off the machine, and learned that the top belt (the machine has two belts) was slipping on the idler pulley.
The belt was as tight as a bowstring, so I was stumped.

I decided to look at the idler pulley, figuring that maybe some oil or grease had worked its way in and was causing the slipping problem.

I loosened the motor, slipped off the belts, unbolted the idler pulley assembly, and instantly spotted the problem.

There was a LOT of thread wrapped tightly around the pulley.
I couldn't see the end of the thread, so I carefully sawed away at it, loosening and unwrapping layers of thread.

There was a thick black layer, a thin blue layer, and then another very thick black layer.

Whoever owned the machine before me had clearly used it for a while like this, and perhaps noticed a gradual drop in performance, until one day it slipped so badly that they gave up on it.

I reassembled and thoroughly oiled the machine and it now runs great.

Feeling pretty pleased with myself, I put the machine away for another time because I had a busy afternoon ahead.

Fast forward to this weekend.
My 4 year old daughter was very excited about this new machine, and was begging me to let it be hers.
She likes to do everything that Daddy does, so she has 'helped' me sew things before.

I promised that she could make Mommy a christmas present using the machine, and hunted around for something simple to make.
I initially thought of an oven glove, but learned that if you want to make a safe oven glove, you need to use 100% cotton thread and special batting.

I decided upon a Turbie Towel, which is a towel turban-type thing that stays on your head better than a regular towel.

The machine came with only one foot; a straight stitch foot.
This was okay for our project, as I planned to use an enclosed seam to stop the terrycloth fraying and shedding.

As we were using the machine, my daughter noticed all the pattern stitches, but I couldn't show them to her because of the straight stitch foot that was on the machine.

I knew that I had a snap-on foot adapter for my other Kenmore, so I promised her that she could try out all the stitches tomorrow (ie today).

I set the machine up today, and discovered to my horror that, while my old Kenmore is a high shank machine, this new one is a low shank, which meant that my adapter didn't fit!

I firmly believe that it is important to keep every promise that I make to my daughter, so I was pretty annoyed at myself for not noticing this sooner.

I remembered that when I had originally been researching my first Kenmore, I had read many times that the only difference between low shank and high shank was the height of the shank itself.

I offered up the adapter to the new machine, and saw that it would almost fit high up enough on the presser bar to work (apart from the location of the screw).

I also noted that the only thing stopping the adapter from sitting higher up on the presser bar was that the flat side of the bar ended too low.

After a few minutes of tinkering, I managed to remove the presser bar, and I carefully extended the flat further up the bar until the adapter would slip on high enough.

I only had to remove enough material to extend the flat for about 1/8", and you really can't tell it wasn't made that way.

I then slipped the adapter onto the bar at the correct height, and marked it where the new hole needed to be.

I popped the adapter into my drill press and drilled the new hole.
The adapter is supposed to have a slot, not a hole, but the only disadvantage of using a hole is that you have to completely remove the retaining screw rather than loosen it.
Since I never really need to remove the adapter to change feet, this was no problem at all.

I reassembled the machine and screwed the adapter into place.
It fit perfectly, and was precisely the same height as the original foot.

Feeling pretty smug, I snapped on a zigzag foot and turned the wheel by had to check everything was good.

Everything was not good.

The first thing that I noticed was that the foot was not lined up over the feed dogs.
It is shifted over to the right by about 1/8", which means that the needle wants to hit the left side of the foot when zigzagging.
The second problem was that the foot is too far forward by about 1/6" to maybe 3/32".
This means that the slot is forward of where it should be, and the needle hits the area of the foot directly behind the slot.

I compared this low shank machine to my high shank machine and kicked myself.

The gap between the needle bar and the presser bar is around 3/8" on the high shank machine, but only about 1/4" on the low shank machine (actually 9mm and 6mm respectively according to my calipers).

Additionally, the needle bar and the presser bar are aligned perfectly with each other on the high shank machine, so that if you look directly at them from the front, the presser bar is directly behind the needle bar.
On the low shank machine, the presser bar is slightly off to the right of the needle bar when viewed from the front.

Since I had promised my daughter, I removed the zigzag foot and enlarged and elongated the slot until the needle no longer hit the foot, and she was able to play around with all of the fancy stitches.

This raises an important question though; I still need feet for this machine.
There are two possible causes of this misalignment problem:

1. My machine has some type of proprietary shank system.
Maybe Kenmore tried this out in order to force people to buy Kenmore accessories, but later abandoned the idea.

2. All of the websites that say that high shank and low shank are identical apart from height are talking out of their respective rear-ends, and there are indeed other subtle differences between the two.

Since I only have these two machines to examine, I have no idea which of the above is correct.

Without knowing the answer to this, I don't know if a low shank to snap-on foot adapter will work with this machine, and I don't want to buy one if it won't work.

Here's where you can help!
If you have a low shank machine (even better if it is not made by Kenmore), please take a quick look at it for me.

On the low shank machine, is the needle bar perfectly in line with the presser bar when viewed straight on from the front, or is the presser bar slightly over to the right?

Thanks in advance!
Jamesbeat is offline  
Old 12-21-2014, 07:01 PM
  #2  
Senior Member
 
Join Date: Oct 2013
Posts: 888
Default

I don't have an answer but I can't wait to read input on this. You may not come through on your promise completely today but your daughter will see you are doing everything you can to make it happen. What really counts is that you did not forget your promise even if could not fulfill to the maximum and you did not abandon your promise for something else.
yobrosew is offline  
Old 12-21-2014, 07:08 PM
  #3  
Member
Thread Starter
 
Join Date: Jun 2014
Location: NY, USA. Originally Birmingham, UK
Posts: 85
Default

I did manage to keep my promise by butchering a zigzag foot with files until it fit

The problem is that I need to know what (if any) adapter I can buy so that standard feet fit without modification.

If this is a standard low shank, then adapters are readily available.
If it's some proprietary shank, I'll have to make or modify an adapter to suit.
Jamesbeat is offline  
Old 12-21-2014, 08:25 PM
  #4  
Super Member
 
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
Default

Your machine should be a standard low shank. I just looked at my Singer 99. The flat of the presser bar appears to be lined up with the needle. I think the shafts themselves are offset a bit to help this happen.

I think Kenmore did have a proprietary system. I think it was a super high shank, not a low shank though. You should be fine with any low shank foot.
Good for you for keeping your promise to your daughter.
Rodney
Rodney is offline  
Old 12-22-2014, 04:19 AM
  #5  
Member
Thread Starter
 
Join Date: Jun 2014
Location: NY, USA. Originally Birmingham, UK
Posts: 85
Default

Yes, the flat of the presser bar does appear to be lined up with the needle, thanks Rodney!

I guess it was the online guides that were innacurate then.
I guess they are written for people who simply want to know whether to buy high or low shank feet rather than idiots like me trying to fit a square peg into a round hole!

Fortunately, no harm has been done. The slightly extended flat on the presser bar looks like it came from the factory, and will not affect the function of it at all.
The high shank to snap on adapter is fine apart from having an extra hole, so that's going back on the model 84.

The only part that is actually ruined is the zigzag foot, but I knew I was deliberately sacrificing it when I took a file to it.

I'm going to order a low shank to snap on adapter now.

Thanks again
Jamesbeat is offline  
Old 12-22-2014, 08:20 AM
  #6  
Super Member
 
oldtnquiltinglady's Avatar
 
Join Date: Aug 2011
Location: Lafayette, TN
Posts: 1,204
Default

Merry Christmas to you and yours, Jamesbeat.....sounds to me like you've had your best one already--making something like this come out right. Congratulations. I enjoyed your story.
oldtnquiltinglady is offline  
Old 12-22-2014, 09:05 AM
  #7  
Member
Thread Starter
 
Join Date: Jun 2014
Location: NY, USA. Originally Birmingham, UK
Posts: 85
Default

Merry Christmas to you too!

I didn't really make it turn out right, but it turned out not to be a disaster.
I did learn a great deal about the inner workings of the machine, and also not to believe everthing you read on the internet
Jamesbeat is offline  
Old 12-22-2014, 09:39 AM
  #8  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

The low shank system is the most common. You can get most everything your imagination can think of for them.
Sew-Classic has a good selection of both the regular screw on feet and the snap on type.
This was not a time when a Rube Goldberg modification was called for.

In removing the presser foot bar you knocked it out of alignment. Now you'll need to get a correct ZZ foot that lines up with the feed dogs and then realine it. It's not hard to do.
Make sure that when the foot is on it, and the presser foot is down, that the foot rests on the bed of the machine when the dogs are down. If it doesn't, you won't be able to get proper tension on the fabric.

I prefer solid mounted feet rather than the snap on feet. I've had way to many occasions for the release lever to be bumped and the feet drop off when I'm sewing. It's difficult to have to fiddle with getting the foot back on when your in the middle of sewing something.

There is little difference between regular High Shank feet, and Low Shank feet other than the height of the shank. You can use the Low Shank feet on High Shank machines with the adapter.
There is also an adapter to use Low Shank feet with the Super High shank Kenmore machines, Sew-Classic has them.
Also the Singer Slant Shank feet look a lot like High Shank feet, but in no way will they interchange. They do not line up and when clamped on the presser foot bar are totally out of alignment with the needle.

Joe

Last edited by QuiltnNan; 01-03-2016 at 10:40 AM. Reason: language
J Miller is offline  
Old 12-22-2014, 10:03 AM
  #9  
Member
Thread Starter
 
Join Date: Jun 2014
Location: NY, USA. Originally Birmingham, UK
Posts: 85
Default

Nothing has been knocked out of alignment.
I took careful measurements when I removed the presser bar to make sure I put it back exactly as it was before.

There is no way to mess up the alignment of the presser bar, because it rides in a vertical hole machined into the casing.

The only possible way to screw it up would be the height and rotation of the bar, because it is a featureless rod held in with set screws.
I scribed witness marks onto the bar to ensure that I could put it back at exactly the same height and attitude as it was originally.

The problem was caused by the fact that high shank and low shank are NOT the same except for the height of the shank.

It's all over the internet that they are the same except for height, and you have repeated it here, but this is NOT true.

If you don't believe me, look at the alignment of the needle bar and the presser bar on both a high shank machine and a low shank machine.
Rodney verified this for me by examining one of his low shank machines.

The distance between the needle bar and the presser bar on the low shank machine is smaller than that on the high shank (6mm vs 9mm) which is why the slot on the zigzag foot was too far forward (by 3mm) when I tried it.

Furthermore, the presser bar is slightly to one side of the needle bar on the low shank, whereas they are aligned straight on the high shank.
This is why the presser foot was shifted slightly to the right.

Presumably these differences are taken into account in the design of the adapters/shapes of the ankles.

I have replaced the original low shank foot that came with the machine, and it is perfectly aligned.
Jamesbeat is offline  
Old 12-22-2014, 10:32 AM
  #10  
Senior Member
 
KenmoreRulesAll's Avatar
 
Join Date: Mar 2014
Location: Puget Sound Region
Posts: 772
Default

I have a 14301. It's a great machine. Here's mine:

[ATTACH=CONFIG]503365[/ATTACH]

You sure got a great price! I think I paid $20 for mine if memory serves. I have the manual and can scan/send if you need it.

(Glenn, I'm still working on that manual for your Gloria machine. I haven't forgotten!)
Attached Thumbnails 158.14301-800x600-.jpg  
KenmoreRulesAll is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ranger
Main
27
12-04-2013 09:02 PM
Tweety2911
Pictures
21
08-27-2013 04:53 PM
JanieW
Main
52
04-08-2013 07:29 AM
NancyHarcourt
Main
14
02-28-2013 09:53 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter