Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Newcomer, have a German 1955 Phoenix 429 Machine >

Newcomer, have a German 1955 Phoenix 429 Machine

Newcomer, have a German 1955 Phoenix 429 Machine

Old 05-29-2013, 09:47 AM
  #11  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

Now, here is The Beast:

[ATTACH=CONFIG]416046[/ATTACH]
Attached Thumbnails img_5866.jpg  
Cecilia S. is offline  
Old 05-29-2013, 09:53 AM
  #12  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

I took The Beast out of its case because it takes up less space this way, and also changing the bobbin required flipping the machine up on its hinges; you can see from the next photo that the bobbin is a Royal Pain to reach.

BTW, I gave everything a nice clean, wipe, and oil, being careful to avoid the fabric-and-metal belt. While I think I will replace a wire in the motor (it looks worn), otherwise things are in amazing shape! It stitches very nicely! Only a straight, reverse, and zig-zag.

So, this next photo shows accessing-the-bobbin.[ATTACH=CONFIG]416047[/ATTACH]


The bobbin case itself is not terribly weird, I suppose; but it does have a funny hook on it, which I have figured out (Miriam ,you are right!) how to thread.
Attached Thumbnails img_5868.jpg  
Cecilia S. is offline  
Old 05-29-2013, 09:58 AM
  #13  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

Do you want me to send a close up of the bobbin? I am afraid of monopolizing the site.... One more photo only, here, I will show you the unusual (at least, it is unlike any other machine I have seen!) threading around the upper tension. Firstly, as you can see on the large photo of the whole Beast, the thread first passes through a neat steel plate with three thread-pass-holes. Then it passes through this bizarre spring near the tension dial. Does this seem right to you? It was quite finicky, getting it threaded. It stitches well, so I must have done something right - but please, if anyone sees an error in my threading, please do let me know! I will be most appreciative of any pointers at all.

[ATTACH=CONFIG]416048[/ATTACH]
Attached Thumbnails img_5871.jpg  
Cecilia S. is offline  
Old 05-29-2013, 10:18 AM
  #14  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

So, now that you have seen The Beast...

It stitches really beautifully! Sounds very gentle for such a hulky thing.

The mechanics, switches, etc are so heavy-duty-industrial-machinery-like. Nothing sleek, smooth, or dainty about it! Yet it sounds ssooooo quiet and behaves so tamely. The stitch width lever, the feed-dog-drop, the needle-position lever... it is all -so- hulky.

A question; I cannot for the life of me figure how I can disengage the bobbin winder from the large wheel during sewing. It must be possible - it seems so bizarre to me that it would be engineered with this one inefficiency. Has anyone had a machine where the bobbin winder was always in contact with the wheel? What could I be doing wrong?

-C.
Cecilia S. is offline  
Old 05-29-2013, 10:36 AM
  #15  
Super Member
 
Join Date: Feb 2011
Location: North Dakota
Posts: 2,633
Red face

should be lever that makes it flip down. it shouldn't be in contact all the time. only when winding a bobbin.
can you post a close up of that area from a couple of different angles. You are not monopolizing the posts --this is how you get help if you need it. from others looking and ooohhing and ahh over the machines. I really wish I could find 1 like this one. she/he is a beaut not a beast. Amy

Last edited by amyjo; 05-29-2013 at 10:38 AM.
amyjo is offline  
Old 05-29-2013, 10:41 AM
  #16  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

So, now that you have seen The Beast...

It stitches really beautifully! Sounds very gentle for such a hulky thing.

The mechanics, switches, etc are so heavy-duty-industrial-machinery-like. Nothing sleek, smooth, or dainty about it! Yet it sounds ssooooo quiet and behaves so tamely. The stitch width lever, the feed-dog-drop, the needle-position lever... it is all -so- hulky.

A question; I cannot for the life of me figure how I can disengage the bobbin winder from the large wheel during sewing. It must be possible - it seems so bizarre to me that it would be engineered with this one inefficiency. Has anyone had a machine where the bobbin winder was always in contact with the wheel? What could I be doing wrong?

-C.
Cecilia S. is offline  
Old 05-29-2013, 10:42 AM
  #17  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

Sorry I somehow posted that twice! I will try to post photos of the bobbin winding area. It is puzzling. The Beast (The Beauty) is really making my day - I have been tinkering all morning, and it is such fun!
Cecilia S. is offline  
Old 05-29-2013, 10:53 AM
  #18  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

So, here is a full view of the bobbin-winding area and the handwheel. Turn your head sideways to the left.[ATTACH=CONFIG]416064[/ATTACH]
Attached Thumbnails img_5875.jpg  
Cecilia S. is offline  
Old 05-29-2013, 11:02 AM
  #19  
Senior Member
Thread Starter
 
Join Date: May 2013
Posts: 670
Default

The curvy metal paddle and the squarish lever operate in tandem, to press down on or release pressure from the bobbin, whilst winding. Pressing the[ATTACH=CONFIG]416066[/ATTACH][ATTACH=CONFIG]416066[/ATTACH] squarish lever causes the curving metal paddle to snap down onto the bobbin, keeping it in place and causing an even winding of the thread. Then, when finished winding, one touches a finger to the underside of the metal paddle and it releases up. As it does this, the square metal lever also returns to its original position. None of these motions affect the position one way or another of the bobbin winder itself, which has all the time been in contact with the handwheel. Here are two closer photos, which show the bobbin winder paddle in up and down position:[ATTACH=CONFIG]416065[/ATTACH]
Attached Thumbnails img_5877.jpg   img_5876.jpg  
Cecilia S. is offline  
Old 05-29-2013, 11:06 AM
  #20  
Super Member
 
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
Default

I am not a bit of help only to tell you your Beast is really a "Beauty".
barny is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cecilia S.
For Vintage & Antique Machine Enthusiasts
39
06-05-2014 05:34 AM
Cecilia S.
For Vintage & Antique Machine Enthusiasts
7
10-29-2013 10:34 AM
Cecilia S.
For Vintage & Antique Machine Enthusiasts
13
09-24-2013 06:27 PM
Cecilia S.
For Vintage & Antique Machine Enthusiasts
2
08-22-2013 04:39 PM
Cecilia S.
Introduce Yourself
20
08-03-2013 01:22 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter