Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Observations about new manufactured presser feet. >

Observations about new manufactured presser feet.

Observations about new manufactured presser feet.

Old 06-11-2012, 07:43 AM
  #11  
Super Member
 
BuzzinBumble's Avatar
 
Join Date: Jun 2011
Location: near Niagara Falls, NY
Posts: 3,075
Default

This is really interesting ... I had noticed that some feet weighed more than others. For our family's 301, 401, & 500 I noticed that a few of the new 1/4" feet have been less or more than 1/4" and this is because of the way their shanks position them. Supposedly they were made for slant shank machines, but they aren't accurately positioned.

Okay Joe, now let me reveal my stupidity.... I am confused about why presser feet need cushions. When my sewing machine is at rest I have always kept the presser foot in the up position. Is this habit a No-No? Should it be kept in the down position with a cloth cushion beneath it?
BuzzinBumble is offline  
Old 06-11-2012, 07:53 AM
  #12  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Lara,

The pads under the presser feet are just to keep the two apart. It's the way I was taught years ago about keeping a spring under tension. They can take a set and loose strength. Weather they will or not depends on a lot of things.
So I make the pad, lower the presser foot and take most of the tension off the spring. It's just the way I do it.
Your way isn't wrong.

Joe
J Miller is offline  
Old 06-11-2012, 08:01 AM
  #13  
Super Member
 
BuzzinBumble's Avatar
 
Join Date: Jun 2011
Location: near Niagara Falls, NY
Posts: 3,075
Default

Originally Posted by J Miller View Post
Lara,

The pads under the presser feet are just to keep the two apart. It's the way I was taught years ago about keeping a spring under tension. They can take a set and loose strength. Weather they will or not depends on a lot of things.
So I make the pad, lower the presser foot and take most of the tension off the spring. It's just the way I do it.
Your way isn't wrong.

Joe
It may not be wrong but your way makes much more sense. I knew there must be some very sound reason behind it! Thank you Joe for enlightening me!
BuzzinBumble is offline  
Old 06-11-2012, 08:09 AM
  #14  
Super Member
 
chris_quilts's Avatar
 
Join Date: Dec 2009
Location: leavenworth, ks
Posts: 3,093
Default

Joe, interesting info about the feet. I was taught that the presser foot goes down as well as the needle when the machine is at rest. I always have a piece of fabric between the presser foot and the feed dogs.
chris_quilts is offline  
Old 06-11-2012, 09:23 AM
  #15  
Super Member
 
Mornigstar's Avatar
 
Join Date: Jul 2010
Location: Bobcaygeon,On./ Bonita Springs, Fl
Posts: 1,015
Default

Never checked feet for metal content just the style/usage. I have a lot of old feet that I will be selling but so
far I have them sorted to keep with my machines. I have been promised a beautiful 99k machine to finish my
collecting then plan to part with any extras as they are piling up. Don't want to be a hoarder.
No glass feet in the collection as I would keep one as conversation piece. Still have a 127 to repair.
Mornigstar is offline  
Old 06-11-2012, 01:12 PM
  #16  
Super Member
 
chris_quilts's Avatar
 
Join Date: Dec 2009
Location: leavenworth, ks
Posts: 3,093
Default

Ok Joe, I don't know about anyone else on here but I amused myself by digging out my Home Depot Special telescoping magnetic wand and checked if my 301's feet were steel. I only checked this machine cuz it's my go-to main machine. Yes, the feet were all magnetic. Again, thanks for this info. I have to confess that I do use 1 plastic foot - it's my 1/4" foot but only on one machine because that's the only machine that it will work on.
chris_quilts is offline  
Old 06-11-2012, 07:02 PM
  #17  
Senior Member
 
pinecone's Avatar
 
Join Date: Jul 2007
Location: New England
Posts: 821
Default

Originally Posted by J Miller View Post
I've been taking two pieces of denim and cutting on piece smaller than the other. Then I center the small piece in the large piece, fold the edges of the larger piece over the smaller piece and sew them together. It makes a perfect cushion for the presser foot.

Joe
I make a lot of purses and use the fusible fleece ironed to the fabric. I use a square piece of the leftovers.

I too have some really old presser feet with scratches on the under side. I just thought it was from sewing over pins. I have noticed that some of the newer ones don't quite line up with the feed dogs. Guess I really didn't give it a thought about the metal involved, it is easy to see plastic. Is one metal supposed to be better than the other?

piney
pinecone is offline  
Old 06-11-2012, 09:10 PM
  #18  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

I have old steel feet that are from the 19 teens that are wear free. I some others that look like someone took a grinder to them.

I do not have any of the newer aluminum ones that have much use on them at all. Well, my 1/4" foot has a bit and the plating is already wearing through.

The feed dogs are made from some pretty hard steel in the older machines. In the newer ones I don't know. They might be aluminum too for all I know. I know Singer made some from plastic years ago.

I suspect they'll all last a good long time if you don't run the machine past the end of the fabric or let somebody play with it.

Joe
J Miller is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Toni C
Links and Resources
10
01-05-2013 09:53 AM
Ditter43
General Chit-Chat (non-quilting talk)
8
09-19-2012 02:56 PM
Ditter43
General Chit-Chat (non-quilting talk)
3
01-30-2011 11:52 AM
Ditter43
General Chit-Chat (non-quilting talk)
30
07-29-2010 07:06 AM
burnsk
General Chit-Chat (non-quilting talk)
8
03-10-2010 02:04 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter