Oh Oh, winter is coming. Where should my machines go?
#21
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Minnesota, USA
Posts: 396
The first picture is the "working" machines. They have all their parts and their cabinets. The second picture is in my sewing room. The top two are my "modern" machines, but not new, by any means. The others all run perfectly, but their cabinets are in various states of disrepair and will need a little TLC before they are reunited. The Franklin I could swap out with the Singer 66, but the two Whites need their cabinets. One is a treadle, the other an electric. The New Home is the one that needs a bobbin and bobbin case.[ATTACH=CONFIG]365907[/ATTACH][ATTACH=CONFIG]365906[/ATTACH]
#23
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
#26
Just a hint: you might want to remove the pincushion on the arm of what looks like a 66 with the beautiful decals. That's how a lot of the machines got scratches there. What a lovely collection you have!
#27
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I do not know how many sewing machines I have. I quit counting at 30. All but one are in the house. Eeeeekk!!
The one outside looks like it might be a parts machine if I can't get the needle bar freed up, but it's soaking in oil so it can wait.
There are two treadle tops and base and two cabinets in the garage too. Just no place for them in the house.
The biggest enemy of sewing machines is heat and wet. Keep 'em at a reasonable temperature and dry and they'll last forever.
Joe
The one outside looks like it might be a parts machine if I can't get the needle bar freed up, but it's soaking in oil so it can wait.
There are two treadle tops and base and two cabinets in the garage too. Just no place for them in the house.
The biggest enemy of sewing machines is heat and wet. Keep 'em at a reasonable temperature and dry and they'll last forever.
Joe
#28
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Minnesota, USA
Posts: 396
I took off the one that "came with" the machine and designed a new one, very soft, with a stiff plastic lining that pins can't poke through.
#29
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Minnesota, USA
Posts: 396
In the garage, I still have a two White cabinets. One is a parlor cabinet for a treadle that I would like to move into the house. It has a broken leg, but I think if I baby it, it should be fine with a little glue. The other is a Martha Washington cabinet that has certainly spent many summers and winters in the attic of the garage. That one might be spending just one more season out there. There are also two Kenmores and a Domestic that will need to find room here in the house. I've spent time getting them cleaned up and running and I'd like to keep them that way. Plus...if they move into the house, I can get the car AND lawnmower back into the garage.
#30
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I've been working on them in the garage, but it's going to get cold soon...and the car wants the garage space. Should the machines come in the house for the winter, just the cabinets, just the heads? Not sure what I should do. The couple treadles I've been using are here in the house, but there are still a few machines that haven't graduated to house status....
Barb
Barb
Just put them all out on the curb on garbage day... BTW what is your address and when is garbage day???
Thread
Thread Starter
Forum
Replies
Last Post
SingerSewer
Main
10
06-22-2013 06:24 AM
tatavw01
Main
4
06-04-2011 01:16 PM
fabric-holic
General Chit-Chat (non-quilting talk)
57
09-24-2010 07:34 PM