Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
One more question for the vintage machine quilters >

One more question for the vintage machine quilters

One more question for the vintage machine quilters

Old 05-22-2012, 05:15 AM
  #1  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default One more question for the vintage machine quilters

I am working on a quilt. It will be pieced by each and every machine we have. But, once that's done I want to quilt it myself. I know I'm biting off a big chunk doing that.

We have a variety of home machines with decent sized harps so I'm thinking of using the 201 to do this with.
Only my Free machine is close to the 201 all the rest are a bit smaller, and some are way smaller.

OK, now, when you are quilting a bed sized object just how in the heck do you do it?

I know I could or should take this to one of the quilting forums but almost never post over there and I have vintage machines not long arm quilting machines.

J e
J Miller is offline  
Old 05-22-2012, 07:26 AM
  #2  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

The throat space will help you greatly. You just scrunch it and sew. I suppose you're not doing free motion on the 201 and are doing stitch in the ditch. A walking foot would help you not get puckers, but if you don't have one give it a try without to see how each machine does. You should try to stitch from the middle first and then outward. You also want to change directions so you're not always sewing the same direction. This can cause distortion and the dreaded puckers. Be sure your backing is taunt but not stretched and that you top is smooth and pinned every 4-6 inches and you'll be ready to give it a go.
Candace is offline  
Old 05-22-2012, 08:00 AM
  #3  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Candace,

Thanks.
We have an aftermarket walking foot that we've never used, and we've got a couple of rolling feet. I've read those are good on quilts too.

I have a small quilt I'm almost finished with. It's a cover to my #2 treadle. I'll try your advise on it first.

Joe
J Miller is offline  
Old 05-22-2012, 08:14 AM
  #4  
Super Member
 
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
Default

Joe, watch some YouTube videos on FMQ...there are many!! You need lots of table space around your machine to support the quilt weight while you are doing FMQ. Like I said, look at YouTube....you will get lots of tutorials, and you'll be able to do it. I learned that way. :-)
jljack is offline  
Old 05-22-2012, 08:19 AM
  #5  
Junior Member
 
Brynn's Avatar
 
Join Date: Mar 2011
Location: Pennsylvania
Posts: 206
Default

I always try to roll up the quilt; it's more economical space wise when working with bigger quilts, and it ensures that the part you're not working on will be maneuverable.
Brynn is offline  
Old 05-22-2012, 08:57 AM
  #6  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Originally Posted by J Miller View Post
Candace,

Thanks.
We have an aftermarket walking foot that we've never used, and we've got a couple of rolling feet. I've read those are good on quilts too.

I have a small quilt I'm almost finished with. It's a cover to my #2 treadle. I'll try your advise on it first.

Joe
Rolling feet don't feed the fabric from above like a walking foot. So, they won't work as well for quilting and feeding the layers through evenly. Use the walking foot before the rolling foot. Rolling feet were designed for feeding leather and slick fabrics, as I'm sure you know. Not for layers, though I'm sure you'll see the difference if you do a few samples.
Candace is offline  
Old 05-22-2012, 09:04 AM
  #7  
Super Member
 
DogHouseMom's Avatar
 
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Default

Another option is to piece the batting ...

Batt the center 1/3 of the quilt and quilt up to 5" from the edge of the batting. When done, attach more batting to the left side - baste - and quilt the left section of the quilt. Then do the same for the right side.

To join the batting you can use batt tape, or a long-wide zig zag stitch (by hand or machine).

To cut the batting so that it matches exactly ... lay one edge of the batting over the other - overlapping by 2" or so. Rotary cut only over the section where the batting overlaps, and rotary cut with very slight "waves" - not a straight line. Pull away the trimmed edge and it's very easy to match the batt edge to edge because the curves will match.

Pretty cool that you're making the quilt with ALL of your machines!!
DogHouseMom is offline  
Old 05-22-2012, 12:08 PM
  #8  
Super Member
 
Join Date: Dec 2010
Location: Michigan
Posts: 3,334
Default

My LQS owner told me to roll the quilt from both sides.... like a scroll. Then, if the quilt is big, you can fit the scroll between your legs and feed it through the machine. It's a little awkward at first but it works quite well. I always pin the layers together well first and work from the middle outward. I've done several quilts that way and I always use my walking foot. Good Luck... and let us see it when you're done.
nanna-up-north is offline  
Old 05-22-2012, 03:37 PM
  #9  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

nanna,

That's pretty much what we did with the batting for my treadle cover quilt. It worked pretty good.

Joe
J Miller is offline  
Old 05-22-2012, 05:26 PM
  #10  
Senior Member
 
happyquiltmom's Avatar
 
Join Date: Jan 2012
Location: NE Indiana
Posts: 564
Default

First, make sure there is plenty of table space behind the machine and to the left. You don't want the weight of the quilt to hinder free movement under the needle. I don't roll my quilt, I just smoosh it as I go. I think rolling and re-rolling wastes too much time and makes the quilt too stiff to move easily.

I use Machingers gloves for better gripping power. These are my favorite because threads don't stick to them and you don't have to keep taking them off when you clip threads.

I would suggest that you take a FMQ class if you haven't already. I learned alot in the one I took, especially what I was doing WRONG! I also love books like Harriet Hargraves' Heirloom Machine Quilting, and Diane Gaudynski's Guide to Machine Quilting and Machine Quilting Guidebook.

Longarm quilting is totally different than quilting on a domestic machine. With a longarm or other frame system, you are moving the machine over the surface of the quilt. With a domestic machine, you are moving the quilt under the needle.

It takes awhile to get a rhythm going between your hand movements and machine speed. It takes TONS of practice to get to the point where you are happy with stitch length and motif shapes. I highly recommend that you make several practice sandwiches before you attempt to work on a quilt.

I see now that you are probably talking more about straight quilting with a walking foot. Alot of this post is referring to free-motion quilting. But, you still need the table space!
happyquiltmom is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sewmuchmore
General Chit-Chat (non-quilting talk)
5
12-25-2015 01:04 PM
annthreecats
Main
7
11-07-2012 07:44 PM
BrendaY
Pictures
14
07-21-2011 12:15 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter