Necchi BU Bobbin Winder HELP!
08-17-2012, 04:12 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Location: Western Washington State
Posts: 548
Necchi BU Bobbin Winder HELP!
I knew my Nova's bobbin winder was wonky (yes, it is a technical term). Took off the handwheel and discovered the main long screw holding the spindle was loose. Yep, it was loose because a piece is missing and the main black cast metal part has a chip missing.
Are there any folks out there that can tell me what goes on the opposite end of the spindle piece? There is a set screw and a place for a shaft. I'd take a pic but the camera is hiding.
Are there any folks out there that can tell me what goes on the opposite end of the spindle piece? There is a set screw and a place for a shaft. I'd take a pic but the camera is hiding.
Thread
Thread Starter
Forum
Replies
Last Post
Puffie40
For Vintage & Antique Machine Enthusiasts
1
03-23-2018 11:41 AM
Sewstrait
For Vintage & Antique Machine Enthusiasts
3
05-26-2013 11:53 AM
MrsBoats
For Vintage & Antique Machine Enthusiasts
5
12-31-2011 01:49 PM
