Singer, Model 66-4, Arm Shaft removal
 

Im in the process of doing a complete restore on a 1925, Singer model 66-4. The machine has been sitting in storage for over 20 years, and just recently I aquired it. I got it home, and after cleaning it up a bit, i relized the machine was the perfect one for me to do my first full restoration. I have strip[ped the machine of every part, (made sure i took extensive pictures as I was removing them..then cleaned every part..But i have 3 parts that for the life of me i can't get out of the machine head. Arm Shaft #32617, Arm Shaft Bushing # 32503, and the Feed Cam # 32562.

Ever lock screw, nutt, you name it is out of this machine, so Im figuring the Arm Shaft Bushing, is pressure seated, now if thats the case i will have to beat it out..but my question is..from the inside out? or outside in? what tool would be best to get it out with?

Any help I can get will be thankful..I'm ready to get this thing sand blasted and painted, so I can get all the parts coving my desk back to where they belong, so I can start my next project.

If you need pictures to see exactly what im talking about, please let me know.

<<<<<will look forward to the reply

WOW! I hope you took a lot of pictures and labeled everything. Was it rusted solid? Were you planning to repaint it? There are automotive paint shops in every town - I bet they could use up their extra paint on it when you get it painted. You might have it back in a couple days by having it painted locally.

Most of those old machines will clean up just fine by a gentle cleaning. Clean off lint with a fine brush. There is a varnish on them that protects them from rusting - I think it is a good idea to just leave that varnish on. A good oiling inside and down under is what they really need to get them turning very freely and sounding good. Chrome cleaner will clean up the chrome parts - doesn't do the decals any good so keep it off them. Clean off the machine with a bit of sewing machine oil and you should be good to go.

Muv has some excellent videos on cleaning a vintage sewing machine. http://www.quiltingboard.com/vintage...v-t167789.html I find her videos very informative and relaxing to watch

Finally, Glen knows how to get those back together and he might coach you to get it working again if he has time.

Singer Model 66-4
 

Thanks for the input, Im pretty much a hands on man as you might have figured out. I'll be painting the unit myself using automotive paint. 2 layers of color coat, maybe 3 then serveral clear coats, but still haven't desided if I will atempt to recreate the original 2 layer silver/gold foil Decal, or design my own. Either way this old girl will shine once again and find herself back on a treadle base, and ready to work while looking pretty.

Would definitly like to hear from Glenn, sounds to me he might be a wonderful resourse. It just hit me, I recieved a call from a gentalman named Glenn who was referred to me by Singer, yesterday after noon, and he lives in Tampa Florida, this wouldn't be the same Glenn by chance?

Glen lives in Hunstville, AL - you can pm - he is a board member

so how DO you remove the arm shaft, the Hook Ring Crank, Feed Dog Crank and the rotating Drive Shaft which would be, I am guessing the Arm Shaft from a Singer 66?

WHY would you do that??????????????

There's a how-to on putting it back together on the vintage singer files yahoo group. Might also have hints for disassembling.

Did you figure this out?
 

I have a lovely girl who dates to 1914 who has a bent main shaft. I have her most of the way apart but seem to be stuck at the same spot you were. Searching for the "vintage singer files yahoo group" brings up several groups :-/

Search the Yahoo groups for "VintageSingers". Once you join you can look through their files.

Cari

As they say in the South, "If it ain't broke, don't fix it". No need to remove those parts.