Standard treadle owner still needs help......
 

We cleaned off the flip plate and the last date on my machine is copywright 1887. I am still missing a bobbin case and bobbin for it. Of all things, I found and purchased a Spider. Boy was I excited! :D Was all ready to go try my machine out by making a chain stitch. Pooh! It didn't fit! :( Or I need something to make it go in correctly. I have a whole bunch of attachments for it now.

Up North.....are you out there???? You posted a picture of your machine on my past thread and yours was made in 1889. Got any info for me? Anyone else??? I love this machine and really want to get it going. I'm sure most people would toss their hands up in the air and give it a toss but I really like the challenge of getting the parts and sewing on these old ones.

Here is a picture of my bobbin area. I have learned that not all of the Standards, depending on the year manufactured, are different. Thanks everyone!
[ATTACH=CONFIG]310893[/ATTACH]

What's that old saying?......"It's me again, Margaret." Well I'm not Margaret but it is me again. In that last sentence I meant to say: I have learned that not all of the Standards, depending on the year manufactured, are the same.

Send a pm to Monica (vintagemotif)...she's the one that has a Standard treadle that has the spider, etc. :)

HiDesertQuilter,
Please post a photo of your spider. First, I need to see if you have the correct spider for the Standard, then maybe I can be of help to you since I own and have used my Standard's attachments: hemmer and chain stitcher (spider).
The Standard spider takes a bit of figuring out how it fits in. I did this without a manual; so, it can be done!

Here is a photo of my bobbin area, just rotated.:)
[ATTACH=CONFIG]311232[/ATTACH]
Spider in place:
[ATTACH=CONFIG]311233[/ATTACH]

Bobbin and case (which could used a cleaning). Hope these images helps you and anyone else that needs information on a Standard Rotary.

[ATTACH=CONFIG]311234[/ATTACH][ATTACH=CONFIG]311235[/ATTACH]

My spider is different than yours so now we have two examples on the website. So that is good. The spider I have came in a metal box of attachments that said 'Standard' on the top. All the other attachments are correct. I have attempted in a couple of pictures to give measurements of the post and hole in the center. This seems to be my problem. Am so glad you answered my post! Thank you.
[ATTACH=CONFIG]312275[/ATTACH][ATTACH=CONFIG]312276[/ATTACH][ATTACH=CONFIG]312277[/ATTACH][ATTACH=CONFIG]312278[/ATTACH]

Here are photo's of my spider for comparison.
[ATTACH=CONFIG]312282[/ATTACH][ATTACH=CONFIG]312283[/ATTACH]

And link to my blog posting on the Standard's spider and the chain stitch that it creates under "I Have a Spider", Dec 13th 2011:http://color-my-world-with-warmth.bl...max-results=50

Photos of the hemmer:
[ATTACH=CONFIG]312284[/ATTACH][ATTACH=CONFIG]312285[/ATTACH][ATTACH=CONFIG]312286[/ATTACH]
Post on instructions on using the hemmer is in my blog Dec 18th, 2011, titled, "The Deadly Hemmer":http://color-my-world-with-warmth.blogspot.com/

This hemmer is used with the spider.

Hoping everyone with a Standard will post pictures and info so we can figure out what years will fit which spider. I have also seen a picture of a different looking bobbin case than you have but the sewing machine had so much corrosion the fellow couldn't get me a year off of it. Somewhere I have seen a hemmer attachment just like the one you are showing. I'm hoping my machine isn't too old for a spider attachment.