threading for Universal machine
4 Attachment(s)
Can anyone tell me how to thread this little Universal machine? Its plate says Deluxe & the serial # is
J116213. I've tried a search but no luck I did get her working & threaded long enough to pull up bobbin thread but I had it threaded wrong & have no papers for her. |
Threading is easy, it's just like a Singer 15 or a regular clone.
First the needle goes in flat to the right. http://i119.photobucket.com/albums/o...s/IMG_3299.jpg Thread comes off the spool to the thread guide on the top back of the face plate. Down to the outside of the top tension and around it towards the inside. Up to the inside of the bent thread guide then around it from the backside to the front. Through the thread check spring then up to the thread take up lever. Through the thread take up lever from the back to the front. Down through the thread guides on the face plate to the needle. Through the needle from left to right. There may also be a thread guide on the needle bar, if so through that too. Easy. |
Thank you so much ! She's up in the mountain house so I'ii try this tomorrow evening
|
All times are GMT -8. The time now is 06:29 AM. |