Originally Posted by irishrose
(Post 4755607)
As a side note, the machine I bought from Goodwill was clean, bright and shiny and works perfectly. Probably the strongest motor in the house (Matsushti). It shipped for a whopping $17+ and was well packed though the box was flimsier than I would have chosen. I paid $6.99, plus the $2 fee. It's a Japanese machine branded Admiral, apparently made by Brother, but it looks like a Necchi. The feed dogs do drop and it has the vertical bobbin I want for FMQ. So why do I want to sell it? Because I have too many machines and still want another 301 and a Redeye.
I can understand the desire for a colored machine, though I would like my next 301 in black. Candace, I do want to congratulate you on finding another 301. My previous post didn't sound like that. You got quite the deal then. |
Originally Posted by miriam
(Post 4755805)
I've picked up 3 machines from the local Goodwill auction site. All three were nice machines and fantastic prices. It seems they always need some kind of work though.
|
3 Attachment(s)
Am trying to post a picture of my purchase yesterday. Took my list with me with your suggestions as to what to look for and the machine passed the test so came home with me. I hope this works, am not liking this new board!!!!
Well that was simple. Must have been to tired to figure it out last night. She needs cleaned up and if someone could send me in the right directions for needles and I think it is suppose to have a rubber disc on the bobbin winder that sits against the wheel to wind it. This is my very first one so all help is appreciated. Have been doing a lot of reading on this board in anticipation of the day I would own one. Thanks!! |
Originally Posted by crewsemj
(Post 4756692)
Am trying to post a picture of my purchase yesterday. Took my list with me with your suggestions as to what to look for and the machine passed the test so came home with me. I hope this works, am not liking this new board!!!!
Well that was simple. Must have been to tired to figure it out last night. She needs cleaned up and if someone could send me in the right directions for needles and I think it is suppose to have a rubber disc on the bobbin winder that sits against the wheel to wind it. This is my very first one so all help is appreciated. Have been doing a lot of reading on this board in anticipation of the day I would own one. Thanks!! I also love the quilt that is behind your machine, very lovely. Is that a braided quilt made of scraps? |
Originally Posted by Bennett
(Post 4754685)
The handy little FW and I have been traveling this weekend, so I need to catch back up around here! :)
I did have another Red Eye (G0454177, Nov. 13, 1923) follow me home on Friday from an estate sale. I think it was cold and lonely sitting on a garage floor. Either that or it didn't want to be made into a lamp like the man watching the door and taking money suggested because it firmly attached itself to my hand and stayed there for the half-block walk to my car. Why do people always look shocked when you say you're going to use one of these sewing machines for sewing??? It doesn't move well and needs a good cleaning, but no rust, and the only decal wear I see is on the bed where it was used. I think I'm going to switch out the presser bar (side-clamp) and put it on the one I have already treadled (back-clamp). |
Originally Posted by crewsemj
(Post 4756692)
Am trying to post a picture of my purchase yesterday. Took my list with me with your suggestions as to what to look for and the machine passed the test so came home with me. I hope this works, am not liking this new board!!!!
Well that was simple. Must have been to tired to figure it out last night. She needs cleaned up and if someone could send me in the right directions for needles and I think it is suppose to have a rubber disc on the bobbin winder that sits against the wheel to wind it. This is my very first one so all help is appreciated. Have been doing a lot of reading on this board in anticipation of the day I would own one. Thanks!! |
Originally Posted by crewsemj
(Post 4756692)
Am trying to post a picture of my purchase yesterday. Took my list with me with your suggestions as to what to look for and the machine passed the test so came home with me. I hope this works, am not liking this new board!!!!
Well that was simple. Must have been to tired to figure it out last night. She needs cleaned up and if someone could send me in the right directions for needles and I think it is suppose to have a rubber disc on the bobbin winder that sits against the wheel to wind it. This is my very first one so all help is appreciated. Have been doing a lot of reading on this board in anticipation of the day I would own one. Thanks!! |
crewsemj, that machine is beautiful, just saw one that was also a New Home on CL cabinet looked good but machine looked much neglected.
Has anyone heard of or used a Domestic sewing machine don't know who makes it but it was in a cabinet, I think I saw 3 of them in the last few days just wondered if anyone has any experience with it. Have to admit the one had a pretty decent price tag, I believe it was going for $60. |
Originally Posted by crewsemj
(Post 4756692)
Am trying to post a picture of my purchase yesterday. Took my list with me with your suggestions as to what to look for and the machine passed the test so came home with me. I hope this works, am not liking this new board!!!!
Well that was simple. Must have been to tired to figure it out last night. She needs cleaned up and if someone could send me in the right directions for needles and I think it is suppose to have a rubber disc on the bobbin winder that sits against the wheel to wind it. This is my very first one so all help is appreciated. Have been doing a lot of reading on this board in anticipation of the day I would own one. Thanks!! Texas Jan |
Originally Posted by Ariannaquilts
(Post 4757014)
Has anyone heard of or used a Domestic sewing machine don't know who makes it but it was in a cabinet, I think I saw 3 of them in the last few days just wondered if anyone has any experience with it. Have to admit the one had a pretty decent price tag, I believe it was going for $60.
|
All times are GMT -8. The time now is 10:49 PM. |