Originally Posted by SewExtremeSeams
(Post 5134812)
Chris, you ARE funny! :D :D :D
|
Originally Posted by jljack
(Post 5136070)
Love that, Chris!! My DH would be standing up shouting "Amen" if he read it!! LOL He is totally in favor of me NOT buying any more machines. I have another Davis coming, and my sister just gave me a White treadle cabinet/irons that I'll use for one of the machines I already have. So, does that count as 2 or 1?? LOL
|
miriam, this MW is no wimp - it was made in Japan by Juki with a 1 amp motor just like a 15 has. My 1950s MW has 1.2 amp motor and while my precious Elna that had sewn through layers of belt leather and dozens of jean hems has only .75 amps. The Wards machine will sew jeans, I'm sure.
My daughter has first refusal on it for my grandson who sews, but it's a lot of machine for a 9 year old. I can see him with the 128. |
Originally Posted by Mizkaki
(Post 5135250)
Nancy,
The 31-15 and the 31-20 are the same machine except for the bobbin size and related area. I'll look for a treadle plate, but I don't think I have one. Cathy Nancy |
Originally Posted by Mizkaki
(Post 5135240)
Is this the 31-15? They take a 16x231 or DBx1 (also go by other numbers). These needles are the same length as the standard 15x1,
but are round shank and the shank may be narrower than a 15x1. Cathy Nancy |
What is recommended as the best brand or type of lubricate for the gears in my machines? I have the right type of oil for the oil spots but want to make sure I use the right stuff for the gears on my machines. My plan is to begin to clean up and lubricate all of my working vintage machines before beginning to get those who don't work... up and working. :)
|
Originally Posted by SewExtremeSeams
(Post 5137626)
What is recommended as the best brand or type of lubricate for the gears in my machines?......
Shari |
Originally Posted by Mom3
(Post 5137676)
I use Tri-Flow grease for the gears and Tri-Flow oil for the rest.
Shari |
Thanks Mom3 and Miriam. Do you get Tri Flow Grease and Tri Flow Oil products through Sew-Classic?
Ok, I opened a can of new worms (for me) or should I say a new can of worms!? I just oiled my FW. I have been sewing on this machine this past week but when I threaded it today, the tension discs seem to be holding on extra tight to the thread no matter what I adjusted it to. I tried moving the dial all the way to the left and right and pulled on the thread... nothing was loose enough for the thread to flow freely... too much tension. So, with my FW 221 book by Nancy Johnson-Sebro, I unscrewed the screw that held the entire tension assembly and laid the pieces out in order that I took them off. Nothing looks out of the ordinary... not dirty, nothing rusted, etc. Should I oil anything while I am in there? Do I need to do anything special when I put it back together? Nancy doesn’t offer much past how to disassemble and reassemble. Yikes! I am glad I took it apart (it's my first time) because now it doesn't seem so scary and I am sure my other machines will need tension attention also. Thanks in advance. You are all so helpful. I learn so much here, often not even commenting. But, oh sew glad you are all here. :) |
Originally Posted by miriam
(Post 5136149)
|
All times are GMT -8. The time now is 09:32 AM. |