Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
refinishing sewing machine cabinets >

refinishing sewing machine cabinets

refinishing sewing machine cabinets

Old 04-25-2011, 05:27 AM
  #41  
Senior Member
 
redbugsullivan's Avatar
 
Join Date: Jan 2011
Location: Western Washington State
Posts: 548
Default

Quick question, for some sections that have minimal damage to the finish, why not use lacquer thinner and 000 steel wool? It redistributes the finish and often times the color without having to redo an entire top (sides...). When dry, everything matches too!

When using this technique, I've been able to avoid the entire strip and refinish process on some gorgeous treadle tables.
redbugsullivan is offline  
Old 04-25-2011, 01:13 PM
  #42  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by redbugsullivan
Quick question, for some sections that have minimal damage to the finish, why not use lacquer thinner and 000 steel wool? It redistributes the finish and often times the color without having to redo an entire top (sides...). When dry, everything matches too!

When using this technique, I've been able to avoid the entire strip and refinish process on some gorgeous treadle tables.
Yes you can do this but with denatured alcohol because the origianl finish was shellac and the alcohol is the natural sovent for it. Lacquer thinner is used on lacquer finishes. Lacquer solvent is acetone(fingernail polish remover). If your finish is lacquer this would be okay if shellac then alcohol. you can test the finish by swabbing a little lacqure thiner if it melts then it is lacquer . Try a little denatured alcohol if it melt then it is shellac. I hope this answered your question. Glenn
Glenn is offline  
Old 04-25-2011, 04:39 PM
  #43  
Senior Member
 
redbugsullivan's Avatar
 
Join Date: Jan 2011
Location: Western Washington State
Posts: 548
Default

Very helpful! I'll check it out on the New Home cabinet being fixed for my MIL. It is beautiful but was left in the rain at some point. The lacquer thinner allowed enough of the finish to come off that I could see the patent date! I thought some fool had painted a section dark brown.
redbugsullivan is offline  
Old 04-25-2011, 04:59 PM
  #44  
Super Member
Thread Starter
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by redbugsullivan
Very helpful! I'll check it out on the New Home cabinet being fixed for my MIL. It is beautiful but was left in the rain at some point. The lacquer thinner allowed enough of the finish to come off that I could see the patent date! I thought some fool had painted a section dark brown.
Usually if the finish is dark brown it is shellac. The lacquer thinner just may have cleaned some dirt a grime off. Do the test and use what the test indicates. I have a tut on cleaning and old finish and some solutions you can make to clean the finish. Look in the search for cleaning sewing machine cabinets and you will find two solutions to make to clean them with. This may be easier than using the solvent method. Glenn
Glenn is offline  
Old 02-22-2012, 03:41 PM
  #45  
Super Member
 
Charlee's Avatar
 
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Default

Thought I'd bring this back up to the top!!
Thanks Glenn, for sharing your knowledge!
Charlee is offline  
Old 02-22-2012, 03:44 PM
  #46  
Super Member
 
Charlee's Avatar
 
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Default

Here's the link to Glenn's cleaning tutorial!!

http://www.quiltingboard.com/tutoria...s-t109859.html
Charlee is offline  
Old 02-22-2012, 09:00 PM
  #47  
Super Member
 
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Default

Thank you,Glenn and Charlee. The Redeye's cabinet will need some work.
irishrose is offline  
Old 02-23-2012, 04:48 AM
  #48  
Member
 
Join Date: Jan 2012
Location: NH
Posts: 42
Default

I will be starting on a old treadle this weekend this will be very helpful, Thank you!
Hollyann is offline  
Old 02-23-2012, 06:22 AM
  #49  
Senior Member
 
pinkberrykay's Avatar
 
Join Date: Nov 2011
Location: SOO, MI
Posts: 838
Default

Thanks for bringing this back to the top. I have a question, my treadle top has a thin layer of wood that is separating, how do I go about sealing back down???
pinkberrykay is offline  
Old 02-23-2012, 01:14 PM
  #50  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Glenn, could you share some info on how you tune up the treadles too?
miriam is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vmaniqui
For Vintage & Antique Machine Enthusiasts
13
12-06-2013 03:40 PM
Vridar
For Vintage & Antique Machine Enthusiasts
13
10-07-2013 04:50 AM
greywuuf
For Vintage & Antique Machine Enthusiasts
1
05-06-2012 01:55 PM
Pinkiris
General Chit-Chat (non-quilting talk)
8
09-21-2011 05:29 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter