replacement cords for Vtg machines
01-30-2012, 04:58 AM
#1
Member
Thread Starter
Join Date: Jan 2012
Location: michigan
Posts: 47
replacement cords for Vtg machines
I bought an old machine/table with a cracked cord. does anyone know the best way to repair this or will it need to be replaced all together? I'm too scared to plug it it as it looks so brittle. any ideas?
02-01-2012, 08:04 AM
#3
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Originally Posted by windylou
I bought an old machine/table with a cracked cord. does anyone know the best way to repair this or will it need to be replaced all together? I'm too scared to plug it it as it looks so brittle. any ideas?
02-01-2012, 08:01 PM
#4
Senior Member
Join Date: Aug 2011
Location: Take time for God today
Posts: 966
yes, I just replaced my cord for my feather weight, I ordered it from All brands, They showed me how to unscrew bottom of foot pedal and the two metal ends with u type metal. Just slide cord onto plate and then screw the bottom
plate back on to top of foot pedal and your done. My cord cost $13.00
The cord I replaced did look ok but , had 2 nicks, I was glad I did replace it it was at the foot pedal really in bad
shape brittle and falling apart. I keep the old cord it is vintage.
plate back on to top of foot pedal and your done. My cord cost $13.00
The cord I replaced did look ok but , had 2 nicks, I was glad I did replace it it was at the foot pedal really in bad
shape brittle and falling apart. I keep the old cord it is vintage.
02-02-2012, 02:32 PM
#5
Member
Thread Starter
Join Date: Jan 2012
Location: michigan
Posts: 47
OK, I think I am among people who care about this kind of stuff! The machine is a Universal and it is in a cabinet. The cabinet front is the back of a chair that slides up into the cabinet and fits flush. The "foot" pedal is mounted on the inside of the cabinet to be used w/ your leg (I think) There are two plugs inside the cabinet - 1 is the cord from the pedal to the plug, and the other is the from the plug outside the cabinet to the wall.
Here are some quick pics I took with my phone just now. Oh, and if anyone has any info on this type of machine or cabinet, I'd love to hear it. The best part? I got the whole shebang, vintage notions in the drawers and all, for $30 at a thrift shop near my house. I got the price down from $50 because I thought I would have to replace the cord.
[ATTACH=CONFIG]308316[/ATTACH]
[ATTACH=CONFIG]308317[/ATTACH]
[ATTACH=CONFIG]308318[/ATTACH]
[ATTACH=CONFIG]308320[/ATTACH]
Here are some quick pics I took with my phone just now. Oh, and if anyone has any info on this type of machine or cabinet, I'd love to hear it. The best part? I got the whole shebang, vintage notions in the drawers and all, for $30 at a thrift shop near my house. I got the price down from $50 because I thought I would have to replace the cord.
[ATTACH=CONFIG]308316[/ATTACH]
[ATTACH=CONFIG]308317[/ATTACH]
[ATTACH=CONFIG]308318[/ATTACH]
[ATTACH=CONFIG]308320[/ATTACH]
02-02-2012, 02:51 PM
#6
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
WOW What a FIND!!!!!!!!! Those Japanese 15s or 15 clones are dandy machines!!! Love that cabinet - you should be able to change the bobbin from that hole in the front without opening the slide plate! DH has rewired more than one of those - not very hard to do if you are somewhat handy. Two links for you: http://www.quiltingboard.com/picture...p-t164361.html and you can see how Iris, Hannah and I cleaned one up. It was easy. http://www.quiltingboard.com/vintage...r-t169127.html There is a lot of info on those pages thanks to everybody who posted.
02-02-2012, 04:02 PM
#7
Member
Thread Starter
Join Date: Jan 2012
Location: michigan
Posts: 47
Wow, those are some gorgeous machines! I have no idea what I've got - it's been sitting in my garage since the summer. I'm miffed that I didn't cover the cabinet b/c my Dh or Stepson - not sure which - left a couple of sports bottles on top and now I have water rings. I've sanded it down a bit, hoping to paint the top at some point.
Now I'm curious about the machine itself!
Now I'm curious about the machine itself!
02-02-2012, 04:10 PM
#8
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
From your picture, you only need the cord from the outlet to the cord that goes in the wall as near as I can tell. It should be an easy fix for a handyman. You can buy an extension cord and cut the receiving end off and then wire it into your outlet box on the machine. You can buy new outlet boxes already wired if you don't want to do it yourself. http://shop.sew-classic.com/Cord-Set...143-SCE143.htm
Last edited by miriam; 02-02-2012 at 04:14 PM.
02-02-2012, 04:45 PM
#9
Member
Thread Starter
Join Date: Jan 2012
Location: michigan
Posts: 47
cool! That takes a load off - I was worried I wasted my $$ and wouldn't be able to find a fix.
I have to share this. When I went out to take the pictures, I dumped out the contents of all the drawers into a box. I just found, in the folds of some fabric scraps, the manual for the machine (CB-1 Sewing Machines), a box of attachments, and an Universal Electric Sewing Machine Series 1953 Twenty Year Guarantee Bond for the sewing machine - dated 2/21/53! there is also a receipt dated 4/22/72 for a service call/labor/and a spring wire totaling $14.50. Also? The sewing center where the machine was purchased is still in business.
Stuff like that makes me giddy!
I have to share this. When I went out to take the pictures, I dumped out the contents of all the drawers into a box. I just found, in the folds of some fabric scraps, the manual for the machine (CB-1 Sewing Machines), a box of attachments, and an Universal Electric Sewing Machine Series 1953 Twenty Year Guarantee Bond for the sewing machine - dated 2/21/53! there is also a receipt dated 4/22/72 for a service call/labor/and a spring wire totaling $14.50. Also? The sewing center where the machine was purchased is still in business.
Stuff like that makes me giddy!
02-02-2012, 05:00 PM
#10
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by windylou
cool! That takes a load off - I was worried I wasted my $$ and wouldn't be able to find a fix.
I have to share this. When I went out to take the pictures, I dumped out the contents of all the drawers into a box. I just found, in the folds of some fabric scraps, the manual for the machine (CB-1 Sewing Machines), a box of attachments, and an Universal Electric Sewing Machine Series 1953 Twenty Year Guarantee Bond for the sewing machine - dated 2/21/53! there is also a receipt dated 4/22/72 for a service call/labor/and a spring wire totaling $14.50. Also? The sewing center where the machine was purchased is still in business.
Stuff like that makes me giddy!
I have to share this. When I went out to take the pictures, I dumped out the contents of all the drawers into a box. I just found, in the folds of some fabric scraps, the manual for the machine (CB-1 Sewing Machines), a box of attachments, and an Universal Electric Sewing Machine Series 1953 Twenty Year Guarantee Bond for the sewing machine - dated 2/21/53! there is also a receipt dated 4/22/72 for a service call/labor/and a spring wire totaling $14.50. Also? The sewing center where the machine was purchased is still in business.
Stuff like that makes me giddy!
Thread
Thread Starter
Forum
Replies
Last Post
Vintagesewist
For Vintage & Antique Machine Enthusiasts
12
08-15-2014 10:06 AM
oldsewnsew
For Vintage & Antique Machine Enthusiasts
10
10-06-2013 07:18 PM
gailmitchell
Links and Resources
1
12-19-2009 01:30 AM
