Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Singer 15-91 ugly bottom stitching >

Singer 15-91 ugly bottom stitching

Singer 15-91 ugly bottom stitching

Old 06-13-2012, 05:33 PM
  #1  
Member
Thread Starter
 
Join Date: Jun 2012
Location: White Plains, NY
Posts: 11
Default Singer 15-91 ugly bottom stitching

First, let me qualify: I have no experience sewing, save for sewing a patch on a uniform or an emergency repair... That being said, I purchased a Singer 15-91 because I read that it is a good machine for sewing marine canvas. Which I have, in need of repair. Sunbrella is the brand of canvas to be specific. At any rate, after about 4 hours or reading, experimenting, and cursing, I was able to successfully make it stitch without a) breaking needles, or b) jamming up into a tangled mess. However, I am still getting ugly bunches of overlapping thread on the bottom on the material. Topside looks great. Details: I am using a #14 singer needle with Gore Tenera V92 thread. I guessed at the bobbin tension, and the top tension is pretty much in the middle. (Tenera is very slippery, as it is basically PTFE, or teflon.) I'll be sewing through about 2-3 layers of sunbrella canvas. Any ideas?
The full size image is here:http://www.pbase.com/mchad/image/144031062/original - it's too big to display here.
mikec is offline  
Old 06-13-2012, 07:08 PM
  #2  
Super Member
 
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Default

Sometimes it could be that it's threaded incorrectly or the needle is in the wrong way. I hope it's a simple solution that solves the problem.
cabbagepatchkid is offline  
Old 06-13-2012, 07:26 PM
  #3  
Super Member
 
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,324
Default

When this happened on my Featherweight the bobbin case/shuttle was in wrong. I have a 15-91 and love it. I haven't taken the bobbin case out before, it is quite similar to the featherweight so hopefully that will help you Do you have the instruction book for your machine? Hopefully you have it, look at pages 30 - 31. It tells you how to clean the Stitch forming mechanism.

Here is a website of the manuals - just find yours

http://www.ismacs.net/singer_sewing_...e-manuals.html

Last edited by quiltingcandy; 06-13-2012 at 07:29 PM.
quiltingcandy is offline  
Old 06-13-2012, 07:33 PM
  #4  
Super Member
 
Join Date: Sep 2010
Location: Upper Michigan
Posts: 8,248
Default

I too have a 15~91. Make sure there is no fuzz or threads in the bobbin case. I just blow it clean or use a make up brush when i change bobbin threads. Also rethread it again from the start. It may look right buta little off. It is sewing fine for a bit so looks like may just be dirt or thread off. Make sure the needle is threaded right. Mine is right to left and the bobbin thread is in correctly. I love mine. Its about all i use anymore!!!
Painiacs is offline  
Old 06-13-2012, 07:38 PM
  #5  
Super Member
 
Charlee's Avatar
 
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Default

A 14 is a pretty lightweight needle for heavy sewing like you're doing...try a jeans needle, or a 16 or 18...
Charlee is offline  
Old 06-13-2012, 08:08 PM
  #6  
Senior Member
 
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
Default

I agree with Charlee...the eye on a 14 is probably too small for the thread to pass thru easily & I'm thinking it's not really heavy enough for the fabric either.
path49 is offline  
Old 06-13-2012, 08:09 PM
  #7  
Member
Thread Starter
 
Join Date: Jun 2012
Location: White Plains, NY
Posts: 11
Default

I'm impressed with the number of good suggestions, so quickly. I do have the manual, so *I think* I have it threaded correctly, but I will confirm. I'll also check the mechanism and clean the case as suggested, and report back. I do have a 16 needle which I will try as well. Thanks all.
mikec is offline  
Old 06-13-2012, 09:42 PM
  #8  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Do not pay attention to the number on the tension. It would be easier to see than to explain how to adjust the tension. Here is a link I started a long time ago - I didn't check to see if they are all still there: http://www.quiltingboard.com/vintage...s-t170748.html anyway it is a bunch of links. It could be that you have the threading wrong around the tension. The thread comes across the top of the machine, goes through the tension, through the tension spring, over the bar, then up through the take up lever. If you do the spring after the bar and then go from the spring straight up to the take up lever it might do weird stuff.

The Sunbrella should be light enough to be sewn by a Singer 15 if the project isn't too huge. If it is a large piece you may have to 'help' the fabric through the machine. When I made a 30 X 50 foot awning, I used some ramps and I folded the material a lot. I was using a Consew walking foot sewing machine. I wonder if you got the tail end of the thread caught in there? You can go up to about a size 18 needle - any bigger and your machine can't handle it very well. The needle won't fit the hole/bobbin/shuttle quite right and an over sized needle on that machine could damage the bobbin case or the shuttle or the throat plate and could make burrs. Trying to pull too much heavy fabric through could bend the needle shaft or the needle. The other thing I can think of that could make stitches like that could be a burr on the hook or somewhere. You have to feel around and then polish out the burr.
miriam is offline  
Old 06-13-2012, 09:44 PM
  #9  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Can you shoot a picture of your machine threaded up - shoot the nose end with the tension?
miriam is offline  
Old 06-14-2012, 03:31 AM
  #10  
Member
Thread Starter
 
Join Date: Jun 2012
Location: White Plains, NY
Posts: 11
Default

Originally Posted by miriam View Post
If you do the spring after the bar and then go from the spring straight up to the take up lever it might do weird stuff.
That is exactly how I had it threaded. I though that is how the instructions said to... I must have been reading it wrong! I don't have time to try it now, as I have to go to work, but I will later tonight and check back.

Here is a photo, and here is the full size, where you can clearly see the route around the tensioner... http://www.pbase.com/mchad/image/144038814/original.jpg

The only thing that is not clear is that the thread goes through the needle from right to left after the last hook at the top of the needle "holder?"

Thanks again


Last edited by mikec; 06-14-2012 at 03:33 AM.
mikec is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Selena
Pictures
58
10-30-2011 05:47 PM
mtspools
Pictures
232
10-25-2011 09:58 AM
Patti Mahoney
Main
6
09-24-2011 11:34 AM
KLO
Main
4
05-21-2011 07:38 AM
Ann63
Main
12
12-01-2010 07:33 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter