Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Wilcox and gibb needles and nut found! >

Wilcox and gibb needles and nut found!

Wilcox and gibb needles and nut found!

Old 05-14-2021, 06:39 AM
  #1  
Member
Thread Starter
 
Join Date: Apr 2021
Posts: 13
Default Wilcox and gibb needles and nut found!

So I got the nut for the chain stitch autotensioner machine from sew Europe ...it is slightly smaller in length than the original but fits the treads perfectly ...

The right needles I found from " treadle lady" shop on etsy. They are a perfect match.

I also got some lockstitch vintage needles they are schmetz system 75 starke 90. I think stark means size. They are in vintage packets like paper envoleopes and the inner paper cracked so I think they're genuine vintage. If anyone has a need for these I can post them
Since I'm useless at tech I will try to post a photo of my machine with its new nutt and the smetz lockstitch needles. They are very similar to the chain stitch but a tiny bit longer.
Thanks for everyone's help and advice! Can't wait to start a project soon!
Coxgibbsinger is offline  
Old 05-14-2021, 07:02 AM
  #2  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,219
Default

Congratulations, good for you.

I'm wondering if the needles you got would work in the Singer treadle that you mentioned at Wilcox and gibb needle nut..

Looking forward to the pictures,

Janey - Neat people never make the exciting discoveries I do.
OurWorkbench is offline  
Old 05-14-2021, 07:28 AM
  #3  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,219
Default

I found this https://www.ebay.com/itm/22404596467...p2047675.l2557 And yes those would be for the Lockstitch #10 Willcox & Cibbs.

I'm having a hard time finding the dimensions for those particular needles. I'll keep looking.

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
OurWorkbench is offline  
Old 05-14-2021, 07:48 AM
  #4  
Member
Thread Starter
 
Join Date: Apr 2021
Posts: 13
Default

They wouldn't fit the singer because they don't have a flat side they're rounded and then they have a groove at the side same as the chain stitch needle has but they're about 4/5 mm longer so that in the chain stitch machine the presser foot couldn't be used. The guy said you could cut them down but seems a shame since they're vintage some of them look a little squiffy as if they've had rust removed or something... There's sort of a texture along the groove so they might not all be viable ...I assume the lockstitch has the same pin as the chain and that might get damaged so someone might want to check each one carefully.

I think I have a few of the old singer treadle needles which seem to have a needle length groove but a flat edge at the top where it slots in. They seem quite long. I haven't cleaned the treadle one or oiled it yet. So can't really check but I think it will be easy enough to find singer needles for it.
Did I mention the sock knitting machine we also found! Didn't even know such a thing existed!! 😃 I might go over to my aunts and have a fiddle with the treadle for some fun for the evening!
Coxgibbsinger is offline  
Old 05-15-2021, 09:31 PM
  #5  
Super Member
 
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Default

Originally Posted by OurWorkbench View Post
I found this https://www.ebay.com/itm/22404596467...p2047675.l2557 And yes those would be for the Lockstitch #10 Willcox & Cibbs.

I'm having a hard time finding the dimensions for those particular needles. I'll keep looking.

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)

Hi Janey,

The system 75 or 581 are the same as the W&G chainstitch needle just a bit longer, roughly 1/8". This needle is used on the American Edge Baster (whatever that is, lol) as well as the W&G Type 10 and 11. The shanks of these needles can be ground down and work on the chain stitchers. I'd love to find a bunch of size 12's which are no longer made for the CS. The new needle sizes start at 14 and get larger up to 19.

Jon
jlhmnj is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter