AngieS

Can someone direct me please? Very excited. I just got this yesterday and haven't gotten to sew a stitch yet.

Bennett

I think someone gave a hint a while back that if you put it in with the round and flat parts doing the same direction as the round and flat parts of the feed dog plate, that is correct on the featherweights. In other words, flat part facing out/left and round part to the inside/right of the machine. I hope.

mim

be sure to thread it right to left -- it won't catch the bobbin thread unless you do. There are also online instruction books if you didn't get one.

I would buy a book -- it will tell you how to oil, fix, and take things apart if you have trouble. They are very available.
Also look up the old machines thread -- He is so very helpful .
Mim

Grannymom

http://www.sewusa.com/Threading_Diag...ng_diagram.htm

AnotherMadQuilter

Link to the service manual. All kinds of info for you.

http://www.singer-featherweight.com/...Service-8.html

AngieS

Thank you so much. I have it going but the thread on the bottom is all bunched up......? What should the setting be for tension...?

AngieS

Trying to upload a picture of my machine.

mim

is the bobbin going in the correct direction?? My FW is back in Maine so I can't help with the book directions
Mim

AnotherMadQuilter

One hint also for your bobbin thread. When you are inserting the bobbin into the bobbin holder the thread should come down in the shape of a "P" as you are looking at it...not a "9".

cwessel47

The flat side goes to the left. Whenever I change the needle I still check to make sure - and I've been sewing on this same machine for nearly 40 years! The eye of the needle DOES NOT face the front and you thread from right to left. Enjoy!