Top thread tight

Old 10-23-2014, 02:44 PM
  #11  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Originally Posted by Tippysmom View Post
I'm scared to fool with the tension dial thingy, afraid I will not be able to get it back on! I will check out the other things you all suggested and see what happens.
You will for sure need to use a manual or look up Tammi's videos on tensions. https://www.youtube.com/watch?v=kzFX...AyBQ2l-Mzkw7ew she walks you through it - the video is VERY clear - I think she has another similar video as well.
miriam is offline  
Old 10-23-2014, 02:45 PM
  #12  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Tippysmom,

If you have a gummed up top tension, bobbin case spring, or both, the machine will never sew completely right until that is cleaned.

I don't know about the sewing machine shops in your area, the one locally charges $65.00 to service a sewing machine.

So, if you can read a pattern and make anything from it, you can read the instructions in TFSR and do your own tensions.
{ http://www.tfsr.org/publications/tec...machine_manual }

Why spend money to have something done you can do yourself?

Joe
J Miller is offline  
Old 10-24-2014, 05:12 AM
  #13  
Super Member
 
Join Date: Jan 2011
Location: Melbourne, Florida
Posts: 1,134
Default

I would start by moving the handwheel a little. This happens to me and jiggling does the trick
celwood is offline  
Old 10-24-2014, 08:13 AM
  #14  
Super Member
 
ArchaicArcane's Avatar
 
Join Date: Jul 2012
Location: Not Here
Posts: 3,817
Default

Originally Posted by miriam View Post
You will for sure need to use a manual or look up Tammi's videos on tensions. https://www.youtube.com/watch?v=kzFX...AyBQ2l-Mzkw7ew she walks you through it - the video is VERY clear - I think she has another similar video as well.
Thanks Miriam

This one might help more (it's the other one you mentioned), unless people want to take the tensioner off the machine: https://www.youtube.com/watch?v=guYToL6Gegs

That said both have some slightly different information in them so it's worth watching both if you have time. Both videos were "Stream of consciousness" no script at all.

The other note (which is in the description but a lot of people don't read them): The "2 setting" I mention toward the end of the video works for most full sized tensioners. For the smaller tensioners, like the 301 and the Featherweight, I find that the setting is full tight when the post is flush - between 9 and 10.

PS, I agree, it's the tension release pin. The bobbin tension wouldn't have anything to do with the top tension not releasing.
ArchaicArcane is offline  
Old 10-24-2014, 09:42 AM
  #15  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Originally Posted by ArchaicArcane View Post
PS, I agree, it's the tension release pin. The bobbin tension wouldn't have anything to do with the top tension not releasing.
No but when things are needing to be cleaned you might as well have at it...
miriam is offline  
Old 10-24-2014, 10:02 AM
  #16  
Super Member
 
ArchaicArcane's Avatar
 
Join Date: Jul 2012
Location: Not Here
Posts: 3,817
Default

OK, bad wording on my part. I will never tell someone not to clean a tension device, top or bottom. Simply adjusting it to be looser - which is more than likely the wrong way btw, wasn't going to fix the situation and might have made other issues (like the tension balance would be off when stitching)
ArchaicArcane is offline  
Old 10-24-2014, 02:24 PM
  #17  
Junior Member
Thread Starter
 
Join Date: Jul 2012
Location: South Carolina
Posts: 213
Default

Well, changing the bobbin tension didn't work, neither did jiggling the wheel. So I will be studying those videos very closely and will attempt to adjust the tension.

Too bad none of us live closer to each other! I do have a friend who is an engineer, and she is one of those people who will fix anything without hesitation. I may ask her to help me on this project, since she has a FW, plus she has dis-assembled many sewing machines and gotten them in good shape.
Tippysmom is offline  
Old 10-24-2014, 02:24 PM
  #18  
Super Member
 
manicmike's Avatar
 
Join Date: Mar 2013
Location: Brisbane, Australia
Posts: 1,850
Default

Originally Posted by Tippysmom View Post
My 221 sews a perfect seam, but when I finish and pull the threads to cut them, the top thread is really tight, so tight that it nearly gathers the fabric. I've tried the upper tension on several numbers and it doesn't change.

What could the problem be??
I just 'got' this. The tension release pin doesn't work. Just one question: Does it work when you push the foot lift up slightly more than normal (hold it up) as in hold up the lever and see if the thread is still tight.

Last edited by manicmike; 10-24-2014 at 02:29 PM.
manicmike is offline  
Old 10-24-2014, 02:32 PM
  #19  
Banned
 
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Default

Originally Posted by Tippysmom View Post
My 221 sews a perfect seam, but when I finish and pull the threads to cut them, the top thread is really tight, so tight that it nearly gathers the fabric. I've tried the upper tension on several numbers and it doesn't change.

What could the problem be??
After reading this whole thread and going back and reading the original post again, I'm wondering if it's not just an issue of making sure the take up lever is over the top of it's travel so the last stitch has finished. If that hasn't happened then the thread will still be tight because the hook hasn't finished it's travel for that stitch. Clear as mud?

Cari
Cari-in-Oly is offline  
Old 10-24-2014, 04:48 PM
  #20  
Junior Member
 
monopas's Avatar
 
Join Date: Mar 2014
Location: Olympia, WA
Posts: 170
Default

Originally Posted by Cari-in-Oly View Post
After reading this whole thread and going back and reading the original post again, I'm wondering if it's not just an issue of making sure the take up lever is over the top of it's travel so the last stitch has finished. If that hasn't happened then the thread will still be tight because the hook hasn't finished it's travel for that stitch. Clear as mud?

Cari
I think Cari might be right. That's what I thought when I read the first post. On mine when I finish I rotate the handwheel towards me until the needle and thread arm are all the way up, and it makes a very subtle click. That's when I know that the stitch is done and the threads will pull smoothly out. Or I take up the foot and then rotate the wheel until the needle is out and the thread frees up. Same with all of the vertical bobbin machines I have, but I didn't know it was a thing before I started on vintage machines and I'd never seen it mentioned explicitly in the manuals.

The semi-vintage electronic Pfaff I use has a feature that does it automatically when you flip the foot lever up. It was creepy the first time I did it accidentally.
monopas is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
karenchi
General Chit-Chat (non-quilting talk)
12
04-29-2011 07:13 PM
butterflywing
General Chit-Chat (non-quilting talk)
6
01-11-2011 07:13 AM
Quilt4u
General Chit-Chat (non-quilting talk)
4
12-17-2009 01:46 PM
dillysnana
Main
38
09-30-2007 12:16 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter