Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Vintage Sewing Machine Shop.....Come on in and sit a spell >

Vintage Sewing Machine Shop.....Come on in and sit a spell

Vintage Sewing Machine Shop.....Come on in and sit a spell

Old 05-09-2011, 04:14 PM
  #15511  
Senior Member
 
Join Date: Jan 2011
Location: Northern California
Posts: 559
Default

Kathie I always thought the 66 was the best machine singer ever made. Glenn[/quote]

Glenn is the 99 as good? I have three 99's and have not tried them. One is a black side, the other is a hand crank and the third is just a regular one(?) I think. Kathie
Kathie S. is offline  
Old 05-09-2011, 04:21 PM
  #15512  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Originally Posted by MonkeeGirl
Just saw this on local craigs list. Anybody able to give info as to whether it would be a good buy? thanks

http://atlanta.craigslist.org/wat/atq/2367141901.html
It couldn't hurt to offer $5
miriam is offline  
Old 05-09-2011, 04:30 PM
  #15513  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Here's a thought.... on the older, straight stitch Singers, clones, treadles and such; has anyone done a check list of what things to 'check' first when there's a problem? Like a trouble shooting guide? That might be a good sort of document to have, especially for newbies to the old ladies. ???[/quote]

As far as a check list I look at it real good - does it move? Is the tension bent? Are the thread guides there? Is the bobbin case there? Is there rust? How much rust? Are all the parts there? Slide plates, etc... How damaged is the paint? Does it chain? Is the stitch regulator working? How much is it? How much do you have to put into it to make it sing? On a zig zag I look to see if it goes back and forth. Does it DO those decorative stitches if it is suppose to? Does the needle hit the hole? Does the needle hit a foot? Does it bring up a bobbin thread? Has it been dropped or thrown through a window? Is it gummed up with oil and not moving? How about the motor? Foot control? Wires? Light? Did someone not figure out how to get it out of a table and break a hinge or break the hinge out of the wood? Are the treadle parts all there? There are probably more questions...


Or do you mean when there is a problem what do you check? There are all kinds of trouble shooting guides on internet - I have learned a lot that way
miriam is offline  
Old 05-09-2011, 04:54 PM
  #15514  
Super Member
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by kwendt
By the way, Glenn.... your refinishing tutorial is great. I relied on that, plus my eyes and past experience in taking down two cabinets and a sewing stool. One cabinet all I did was take the old finish off, re apply new finish. Nice. The other cabinet had what looked to be the scorch mark from a large PAN set on it. Ended up taking it down, lightly sanding the top vaneer and bleaching the stain lighter. Then sanding, then staining the whole piece an antique walnut, pretty dark... to blend it in. Bugger of a thing. But it worked.

Now I have that badly damaged trapazoid cabinet to deal with. Whoo hoo. This is time consuming but not all that hard. Thanks again!
Great! I am glad you are finding the instructions useful. Let us see some pics of your handy works. Glenn
Glenn is offline  
Old 05-09-2011, 04:59 PM
  #15515  
Super Member
 
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Default

Originally Posted by Kathie S.
Kathie I always thought the 66 was the best machine singer ever made. Glenn
Glenn is the 99 as good? I have three 99's and have not tried them. One is a black side, the other is a hand crank and the third is just a regular one(?) I think. Kathie[/quote]

I have never had an issue with the 99 they sew just fine but I don"t really use mine much. I just like the 66"s better. Billy can answer this question better than I. I would not turn one down :lol: Glenn
Glenn is offline  
Old 05-09-2011, 05:11 PM
  #15516  
Super Member
 
Miz Johnny's Avatar
 
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Default

Originally Posted by Grandmother23
http://neworleans.craigslist.org/atq/2365572119.html

This one just might want to find a cozy home with me. I really like the cabinet. Says it is a singer.....
That one's definitely not a Singer, but I would grab it in a heartbeat.
Miz Johnny is offline  
Old 05-09-2011, 05:20 PM
  #15517  
Super Member
 
Miz Johnny's Avatar
 
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Default

Originally Posted by purplefiend
Originally Posted by Grandmother23
http://neworleans.craigslist.org/atq/2365572119.html

This one just might want to find a cozy home with me. I really like the cabinet. Says it is a singer.....
I don't think its a Singer. The cabinet is like none I've ever seen.
Very interesting.
Sharon W.
White??
Miz Johnny is offline  
Old 05-09-2011, 05:43 PM
  #15518  
Super Member
 
Miz Johnny's Avatar
 
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Default

That particular model, with the square corners is the Model A-1, and was made only in the 70s and 80s, so 1882 would probably be the right date.
Originally Posted by shelburn
Hi purplefiend, Love your little machine. it looks similar to mine (except for the beautiful paint job!!! ) I did research on the Smithsonian site and got information on the company. And I called the 800 no. for New Home/Janome.
Talked with a lady who asked where the machine was made and as far as I can tell, it was made in Orange, Mass.
Which she said placed it at the year 1882. That seems awfully early to me, but the previous owner got the machine from her mother, and that date would have been in the ballpark of her younger years.
Anyway I am having fun cleaning it up and hope to have a good picture of the end result soon. I will attempt to send a picture or two today, but cant promise any thing.
Miz Johnny is offline  
Old 05-09-2011, 05:47 PM
  #15519  
Super Member
 
Miz Johnny's Avatar
 
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Default

It's kind of hard to see, but this might be an early parlor cabinet which originally had a coffin top.
Originally Posted by kwendt
Hi all my wonderful treadle friends...serious question for you...

I've been looking for a 201 either to treadle or electric. Also been looking for a treadle cabinet without a machine, to put one of my 127's in.

Here's something I ran across about an hour away from me. Current owner's great grandmother had it in Canada. Has moved around with the family for years. Last move about 15 years ago... was sitting in garage for about 10 years or so. Picture follows. The cabinet, is a parlor/drawing room style I've never seen. Drawers on the RIGHT, fold down leaf on LEFT, yet top opens too? Note that the irons are gone. Cabinet was 'converted to electric' by ggm and made to fit her 201 (pictured sitting on the top). According to current owner, the two panels that are unattached: 1 is the door that swings over the column of drawers, and the other is one of the side panels that has come loose. Glue has unstuck. Current own says that it dates to 1914. I suppose that the cabinet does, but that 201 doesn't.

Here are my questions. Can anyone identify this cabinet? Is it a singer cabinet? or is it a different manuf.? (I haven't seen it yet, so I don't know if there are any manufacturers marks/labels left on it anywheres). I'm asking, CAUSE my next question is.... how hard would it be to find/source the irons and mechanisms to bring this back to treadle? Assuming of course, that the wood wasn't butchered in the orig. process.

Next set of questions. That 201 was alloted in 1948. It's not original to the cabinet, machine fits into cabinet now... but I don't know why the machine is shown sitting on top of the cabinet, instead of sitting in it. I'm told that the stitch length level/forward/reverse... will only work if you HOLD it in position while sewing. That the machine will not feed the cloth either forwards or backwards otherwise. ????? Easy fix? Or no? Should I pick this machine up as my 201?
Miz Johnny is offline  
Old 05-09-2011, 06:25 PM
  #15520  
Senior Member
 
olebat's Avatar
 
Join Date: May 2010
Location: WV
Posts: 819
Default

Just read a long line of threads ref the Singer 201. I'm considering one in a fine looking cabinet. Granny thinks it doesn't work. She's 80, and the sole owner. For the $30 they're asking, I think it'll be worth the price, if for nothing more than the cabinet. Looking for words of wisdom when I look at the machine. They, (grandson quoting GM) called it a treadle, when it clearly has a motor, so they obviously are close to clueless. There is nothing ornate in the photos he sent, and no obvious rust. Not sure about a hole in the cabinet - if it is a place to run electric wires or a belt. This jog anyones memory of something similar?
Attached Thumbnails attachment-195191.jpe   attachment-195192.jpe  
olebat is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter